Difference between revisions of "Approved Materials - Traffic Signals"
Brian Geiger (talk | contribs) m (→Two-Part Epoxy for Concrete: Fixed dead catalog links due to special symbols in file names.) |
Brian Geiger (talk | contribs) (→Advance Radar Detectors: Added ARC6 Mounting Bracket) |
||
(3 intermediate revisions by the same user not shown) | |||
Line 1,083: | Line 1,083: | ||
| | | | ||
|[http://www.wavetronix.com/en Wavetronix] | |[http://www.wavetronix.com/en Wavetronix] | ||
|[[Media:TRF PQL TS CAT Wavetronix AdvanceDetector.pdf|Model WX-SS-200V SmartSensor Advance Unit]]<br>SDLC Cabinet Interface Device<br>[[Media:TRF PQL TS CAT Wavetronix 6-PortSDLCInterface.pdf|6 Terminal Ports: Arc6 102-0594 (WX-500-0417)]]<br>Includes [[media:TRF PQL TS CAT Wavetronix SmartSensorSurgeCard.pdf|Surge Card: 102-0562 (WX-500-0381)]] | |[[Media:TRF PQL TS CAT Wavetronix AdvanceDetector.pdf|Model WX-SS-200V SmartSensor Advance Unit]]<br>SDLC Cabinet Interface Device<br>[[Media:TRF PQL TS CAT Wavetronix 6-PortSDLCInterface.pdf|6 Terminal Ports: Arc6 102-0594 (WX-500-0417)]]<br>Includes [[media:TRF PQL TS CAT Wavetronix SmartSensorSurgeCard.pdf|Surge Card: 102-0562 (WX-500-0381)]]<br>Requires [[media:TRF_PQL_TS_CAT_Wavetronix_6-PortSDLCInterfaceBracket.pdf|Cabinet Interface Mounting Bracket 102-0486 (WX-500-0394)]] | ||
|[[Media:TRF PQL TS MEM Wavetronix AdvanceDetector.pdf|1/10/11]] | |[[Media:TRF PQL TS MEM Wavetronix AdvanceDetector.pdf|1/10/11]] | ||
| | | | ||
Line 1,110: | Line 1,110: | ||
| | | | ||
|[http://www.wavetronix.com/en Wavetronix] | |[http://www.wavetronix.com/en Wavetronix] | ||
|[[Media:TRF PQL TS CAT Wavetronix PresenceRadarDetector.pdf|Model WX-SS-225 SmartSensor Matrix Presence Unit]]<br>SDLC Cabinet Interface Device<br>[[Media:TRF PQL TS CAT Wavetronix 6-PortSDLCInterface.pdf|6 Terminal Ports: Arc6 102-0594 (WX-500-0417)]]<br>Includes [[media:TRF PQL TS CAT Wavetronix SmartSensorSurgeCard.pdf|Surge Card: 102-0562 (WX-500-0381)]] | |[[Media:TRF PQL TS CAT Wavetronix PresenceRadarDetector.pdf|Model WX-SS-225 SmartSensor Matrix Presence Unit]]<br>SDLC Cabinet Interface Device<br>[[Media:TRF PQL TS CAT Wavetronix 6-PortSDLCInterface.pdf|6 Terminal Ports: Arc6 102-0594 (WX-500-0417)]]<br>Includes [[media:TRF PQL TS CAT Wavetronix SmartSensorSurgeCard.pdf|Surge Card: 102-0562 (WX-500-0381)]]<br>Requires [[media:TRF_PQL_TS_CAT_Wavetronix_6-PortSDLCInterfaceBracket.pdf|Cabinet Interface Mounting Bracket 102-0486 (WX-500-0394)]] | ||
|[[Media:TRF PQL TS MEM Wavetronix PresenceRadarDetector.pdf|5/30/13]] | |[[Media:TRF PQL TS MEM Wavetronix PresenceRadarDetector.pdf|5/30/13]] | ||
|[[media:TRF PQL TS PHOT Wavetronix ARC6-Terminal Port SDLCInterfaceModule Front.JPG|SDLC Interface Front View]]<br>[[media:TRF PQL TS PHOT Wavetronix ARC6-Terminal Port SDLCInterfaceModule Back.JPG|SDLC Interface Back View]]<br>[[media:TRF PQL TS PHOT Wavetronix ARC6-Terminal Port SDLCInterfaceModule.JPG|SDLC Interface Iso View]]<br>[[media:TRF PQL TS PHOT Wavetronix ARC6-Terminal Port SDLCInterfaceModule SurgeCard.JPG|SDLC Interface Surge Protector Card]]<br>[[Media:TRF PQL TS PHOT Wavetronix PresenceRadarDetector CablePort.JPG|Sensor Cable Ports]]<br>[[Media:TRF PQL TS PHOT Wavetronix SDLCInterfaceModule Wire Plug.JPG|SDLC Module Wire Plug]] | |[[media:TRF PQL TS PHOT Wavetronix ARC6-Terminal Port SDLCInterfaceModule Front.JPG|SDLC Interface Front View]]<br>[[media:TRF PQL TS PHOT Wavetronix ARC6-Terminal Port SDLCInterfaceModule Back.JPG|SDLC Interface Back View]]<br>[[media:TRF PQL TS PHOT Wavetronix ARC6-Terminal Port SDLCInterfaceModule.JPG|SDLC Interface Iso View]]<br>[[media:TRF PQL TS PHOT Wavetronix ARC6-Terminal Port SDLCInterfaceModule SurgeCard.JPG|SDLC Interface Surge Protector Card]]<br>[[Media:TRF PQL TS PHOT Wavetronix PresenceRadarDetector CablePort.JPG|Sensor Cable Ports]]<br>[[Media:TRF PQL TS PHOT Wavetronix SDLCInterfaceModule Wire Plug.JPG|SDLC Module Wire Plug]] | ||
Line 2,741: | Line 2,741: | ||
|- | |- | ||
| | | | ||
|[ | |[https://www.mobotrex.com/ Mobotrex / Eagle Signal] | ||
|[[media:TRF PQL TS BRO Mobotrex-Eagle VehicularSignalHead.pdf|Brochure]]<br><u>Yellow Body</u><br>[[media:TRF PQL TS CAT Mobotrex-Eagle 1SectVehicularSignalHead.pdf|SA101A1C11YBB10-37 for 1 Section]]<br>[[Media:TRF PQL TS CAT Mobotrex-Eagle 3SectVehicularSignalHead.pdf|SA103A1C11YBB30-37 for 3 Section]]<br>[[media:TRF PQL TS CAT Mobotrex-Eagle 4SectVehicularSignalHead.pdf|SA104A1C11YBB40-37 for 4 Section]]<br>SA1031T3T1111YBB - HAWK<br><br><u>Black Body</u>:<br>[[media:TRF PQL TS CAT Mobotrex-Eagle 1SectVehicularSignalHead.pdf|SA101A1C11BBB10-22 for 1 Section]]<br>[[Media:TRF PQL TS CAT Mobotrex-Eagle 3SectVehicularSignalHead.pdf|SA103A1C11BBB30-37 for 3 Section]]<br>[[media:TRF PQL TS CAT Mobotrex-Eagle 4SectVehicularSignalHead.pdf|SA104A1C11BBB30-37 for 4 Section]]<br>SA1031T3T1111BBB - HAWK | |[[media:TRF PQL TS BRO Mobotrex-Eagle VehicularSignalHead.pdf|Brochure]]<br><u>Yellow Body</u><br>[[media:TRF PQL TS CAT Mobotrex-Eagle 1SectVehicularSignalHead.pdf|SA101A1C11YBB10-37 for 1 Section]]<br>[[Media:TRF PQL TS CAT Mobotrex-Eagle 3SectVehicularSignalHead.pdf|SA103A1C11YBB30-37 for 3 Section]]<br>[[media:TRF PQL TS CAT Mobotrex-Eagle 4SectVehicularSignalHead.pdf|SA104A1C11YBB40-37 for 4 Section]]<br>SA1031T3T1111YBB - HAWK<br><br><u>Black Body</u>:<br>[[media:TRF PQL TS CAT Mobotrex-Eagle 1SectVehicularSignalHead.pdf|SA101A1C11BBB10-22 for 1 Section]]<br>[[Media:TRF PQL TS CAT Mobotrex-Eagle 3SectVehicularSignalHead.pdf|SA103A1C11BBB30-37 for 3 Section]]<br>[[media:TRF PQL TS CAT Mobotrex-Eagle 4SectVehicularSignalHead.pdf|SA104A1C11BBB30-37 for 4 Section]]<br>SA1031T3T1111BBB - HAWK | ||
|[[Media:TRF PQL TS MEM Mobotrex-Eagle VehicularSignalHead.pdf|5/5/03]] | |[[Media:TRF PQL TS MEM Mobotrex-Eagle VehicularSignalHead.pdf|5/5/03]] | ||
Line 2,752: | Line 2,752: | ||
|[[Media:TRF PQL TS PHOT NorthAmerican VehicleSignal Front.JPG|Front]]<br>[[Media:TRF PQL TS PHOT NorthAmerican VehicleSignal Back.JPG|Back]]<br>[[Media:TRF PQL TS PHOT NorthAmerican VehicleSignal Hinge.JPG|Hinge]]<br>[[Media:TRF PQL TS PHOT NorthAmerican VehicleSignal Side.JPG|Side]]<br>[[Media:TRF PQL TS PHOT NorthAmerican VehicleSignal Terminals.JPG|Terminal]]<br>[[Media:TRF PQL TS PHOT NorthAmerican VehicleSignal ThumbScrew.JPG|Thumb Screw]]<br>[[Media:TRF PQL TS PHOT NorthAmerican VehicleSignal Label.JPG|Label]] | |[[Media:TRF PQL TS PHOT NorthAmerican VehicleSignal Front.JPG|Front]]<br>[[Media:TRF PQL TS PHOT NorthAmerican VehicleSignal Back.JPG|Back]]<br>[[Media:TRF PQL TS PHOT NorthAmerican VehicleSignal Hinge.JPG|Hinge]]<br>[[Media:TRF PQL TS PHOT NorthAmerican VehicleSignal Side.JPG|Side]]<br>[[Media:TRF PQL TS PHOT NorthAmerican VehicleSignal Terminals.JPG|Terminal]]<br>[[Media:TRF PQL TS PHOT NorthAmerican VehicleSignal ThumbScrew.JPG|Thumb Screw]]<br>[[Media:TRF PQL TS PHOT NorthAmerican VehicleSignal Label.JPG|Label]] | ||
|- | |- | ||
| | |Formerly Peek Traffic. | ||
|[https://www. | |[https://www.oriux.com/ Oriux] | ||
|<u>Yellow Body</u><br>[[Media:TRF PQL TS CAT Peek VehicularSignalHead.pdf|PSS81S001FO for 1 Section<br>PSS83S003FO for 3 Section<br>PSS84S004FO for 4 Section]]<br><br><u>Black Body</u><br>[[Media:TRF PQL TS CAT Peek VehicularSignalHead.pdf|PSS81E001FO for 1 Section<br>PSS83E003FO for 3 Section<br>PSS84E004FO for 4 Section]] | |<u>Yellow Body</u><br>[[Media:TRF PQL TS CAT Peek VehicularSignalHead.pdf|PSS81S001FO for 1 Section<br>PSS83S003FO for 3 Section<br>PSS84S004FO for 4 Section]]<br><br><u>Black Body</u><br>[[Media:TRF PQL TS CAT Peek VehicularSignalHead.pdf|PSS81E001FO for 1 Section<br>PSS83E003FO for 3 Section<br>PSS84E004FO for 4 Section]] | ||
|[[Media:TRF PQL TS MEM Peek VehicularSignalHead.pdf|5/5/03]] | |[[Media:TRF PQL TS MEM Peek VehicularSignalHead.pdf|5/5/03]] |
Latest revision as of 13:28, 11 November 2024
Return to Approved Materials |
Anchor Bolts
Anchor Bolts For Signal Mast Arm Poles
Notes | Manufacturer | Catalog Number | Approval Date | Photos |
JH Botts | Anchor Bolt Detail 1 1/2" x 54" x 6": 6 UNC 2A x 10" (54" + 6") GALV 20" 1 3/4" x 84" x 6": 5 UNC 2A x 10" (84" + 6") GALV 20" 2" x 84" x 6": 4 1/2 UNC 2A x 10" (84" + 6") GALV 20" |
1/21/15 | ||
Millerbernd | Use Column for "Part No. Bolt w/2 Nuts & 2 Flat Washers" 1 1/2" x 54" x 6": 460A579-12DNFW 1 3/4" x 84" x 6": 460A579-4DNFW 2" x 84" x 6": 460A579-5DNFW |
7/30/15 | ||
Madden Bolt Corp fabricates for Union Metal | Union Metal | 1 1/2" x 54" x 6": 311657 1 3/4" x 84" x 6": 311658 2" x 84" x 6": 311659 |
7/5/16 |
Comment: | ||
ASTM F1554 GR55 Threads shall be rolled |
Anchor Bolts For Pedestal Signal Poles
Notes | Manufacturer | Catalog Number | Approval Date | Photos |
Component Products, Inc | CPI-AB-18 | 4/24/14 | ||
Gades Sales | PB-5518-GLV | 4/24/14 | ||
JH Botts | .750"-10 UNC 2A x 6" (17" + 3") GALV 20" | 1/21/15 | ||
Pelco Products, Inc. | PB-5518-GLV | 4/23/14 |
Comment: | ||
ASTM A36, Gr 50 or Gr 55 Threads shall be rolled 17" - 18" Length |
Top | Return to Approved Materials |
Backplates (Vehicular)
Standard Vehicular Backplates
Notes | Manufacturer | Catalog Number | Approval Date | Photos |
Gades Sales / Neodesha Plastics | BP481PO – 1 section BP483PO – 3 section BP484PO – 4 section BP485PO – 5 section |
5/5/03 | ||
Mid American Signal | For Econolite or North American Signal Heads MI-1003-L2 – 3 section For McCain Signal Heads MI-1003-N – 3 section |
5/5/03 | ||
Mobotrex / Eagle | For Mobotrex / Eagle Signal Heads BVD501ANFXX0N0-00 – 1 section BVD503ANFXX0N0-00 – 3 section BVD504ANFXX0N0-00 – 4 section Where XX = 02 for AstroBracket and 05 for SkyBracket BVD503TNF050N0-00 – HAWK |
3/25/19 | ||
Pelco Products, Inc. | For Econolite or North American Signal Heads BK-1001-L3 – 1 section BK-1003-L3 – 3 section BK-1004-L3 – 4 section BK-1005-L3 – 5 section BK-2032-L3 - HAWK For McCain Signal Heads BK-1001-N – 1 section BK-1003-N – 3 section BK-1004-N – 4 section BK-1005-N – 5 section BK-2032-N - HAWK |
5/5/03 |
Comment: | ||
0.125” thick 12” Signal Head Sections |
Flexible Vehicular Backplates
Notes | Manufacturer | Catalog Number | Approval Date | Photos |
For Maintenance Use Only | Pelco Products Inc. | Universal AeroFlex Options Standard BK-8000-3-PNC - 3 Section BK-8000-4-PNC - 4 Section With Fluorescent Border BK-8000-3-RT2-PNC - 3 Section BK-8000-4-RT2-PNC - 4 Section Eagle DuraSig-Specific Poly AeroFlex Options Standard BK-8100-3-EagleSG-PNC - 3 Section BK-8100-4-EagleSG-PNC - 4 Section With Fluorescent Border BK-8100-3-EagleSG-RT2-PNC - 3 Section BK-8100-4-EagleSG-RT2-PNC - 4 Section McCain Specific Poly AeroFlex Options Standard BK-8100-3-McCain-PNC - 3 Section BK-8100-4-McCain-PNC - 4 Section With Fluorescent Border BK-8100-3-McCain-RT2-PNC - 3 Section BK-8100-4-McCain-RT2-PNC - 4 Section |
8/2/19 | Front View Back View Connection |
Comment: | ||
Universal backplates will fit McCain 12" Poly, Econolite 12" Poly, TCT/Peek 12" Poly |
Top | Return to Approved Materials |
Cable
CNG Monitoring Cable/Illuminated Street Name Sign Cable
Notes | Manufacturer | Catalog Number | Approval Date | Photos |
Advanced Digital Cable | 8103 | 5/5/03 | ||
Falcon Fine Wire | 980314X19-1 | 4/24/08 | Label Cable |
Comment: | ||
1-3c#14 IMSA 19-1 |
CNG Power Cable 1-3c #2AWG
Notes | Manufacturer | Catalog Number | Approval Date | Photos |
Advanced Digital Cable | 302 UL File # E197262 |
5/20/16 | Cable Label E File No. | |
Acquired by Southwire | Coleman Cable Inc. | 41112 MTW Cable | 11/5/12 | Cable |
Service Wire Co | USE2BK | 5/7/02 | ||
Southwire | #2 AWG stranded copper |
Comment: | ||
600 Volt Copper soft drawn stranded copper #2 AWG |
Electrical Service Cable
Notes | Manufacturer | Catalog Number | Approval Date | Photos |
Advanced Diital Cable | 304 UL file # E197262 |
5/20/16 | Mfg Label AWG Label Cable | |
Alan Wire | 04USE11 – 500’ UL file #E319493 |
1/30/12 | Cable E-File Label | |
Member of The Marmon Group of Companies | Cerro Wire & Cable Co, Inc. | 1201-4401-Black 1201-4402 - White 1201-1105 - Green UL file # E11098 |
5/5/03 | |
Part of the Prysmian Group | Draka | 388932 | 7/8/09 | |
Encore Wire LTD | UL file # E174428 | 8/1/03 | Cable E-File | |
Kris Tech Wire Co, Inc. | 0407-RHW/USE-BK UL file # E207249 |
11/24/03 | Cable Label | |
Service Wire Co | USEVW4BK UL file # E105667 |
5/7/02 | Cable Label | |
Southwire Co | 113472 – Black 476565 – White 952663 - Green UL file # E32071 |
5/5/03 |
Comment: | ||
No. 4 AWG USE Copper Single cable, not three cables twisted on the reel |
Emergency Vehicle Pre-emption (EVP) Detector Cable
Notes | Manufacturer | Catalog Number | Approval Date | Photos |
Belden | 580461 | 11/7/05 | Cable | |
Global Traffic Technologies | Model 138 | 3/24/08 | Cable |
Induction Loop Cable 1c#14
Notes | Manufacturer | Catalog Number | Approval Date | Photos |
Advanced Digital Cable | 8450 | 6/29/09 | ||
Belden | 580206 | 6/17/03 | ||
Falcon Fine Wire | 14-1 IMSA 51-5 | 4/20/01 | ||
James Monroe Wire and Cable Corporation | IMSA 51-5 | 9/1/99 |
Comment: | ||
IMSA Type 51-5 Tube Loop Detector Cable PVC/nylon Insulated cable PVC Tube 600 Volt |
Multi-conductor 7c#14 and 2c#14
Notes | Manufacturer | Catalog Number | Approval Date | Photos |
Advanced Digital Cable / Clifford of Vermont | 7c – 8107 / 7C14B7I19-1 2c – 8102 / 2C14B7I19-1 |
5/5/03 | 2 Condctor Cable 7 Conductor Cable Mylar Wrap Label | |
Not a standard product but they will produce |
Belden | 7c – 601205 2c – 601457 |
2/1/01 | Label Cable |
Falcon Fine Wire | 7c – 980714X19-1-00 2c – 980214X19-1-00 |
5/23/05 | 7c Label 7c Mylar Wrap 7c Cable 2c Label 2c Mylar Wrap 2c Cable | |
James Monroe Wire and Cable Corporation | 7c – IMSA 19-1 2c – IMSA 19-1 |
9/1/99 |
Comment: | ||
IMSA 19-1 600 Volt Stranded Copper #14 AWG |
Micro loop Home Run
Notes | Manufacturer | Catalog Number | Approval Date | Photos |
Global Traffic Technologies bought out 3M | Global Traffic Technologies | Model Canoga 30003 | 5/20/03 |
Radar Detector Home Run Cable
Notes | Manufacturer | Catalog Number | Approval Date | Photos |
Allied Wire & Cable | 091102WGP12 | 1/10/11 | ||
Falcon Fine Wire | 532P2218HD-08 2 pair 22 AWG communication wires 1 pair 18 AWG power wires |
11/13/14 | Separated Cable Bundled Cable "Matrix Advance" Label Label showing wire guage | |
Orion Wire / Wavetronix | WX-SS-H705 | 1/10/11 |
Comment: | ||
2 pair 22 AWG communication wires (blue, blue/white, orange, orange/white) 1 pair 20 AWG power wires (red and black) 1 drain cable, unless otherwise shown |
Radar Detector Harness Cable
Notes | Manufacturer | Catalog Number | Approval Date | Photos |
Orion Wire / Wavetronix | WX-SS-H704-100 | 1/10/11 |
Comment: | ||
100’ harness to be spliced to home run cable at pole base Cable harness to be supplied with the detector. |
Shielded Detector Lead-in 2c#14
Notes | Manufacturer | Catalog Number | Approval Date | Photos |
Advanced Digital Cable | 8780 | 6/29/09 | Cable | |
Belden | 601765 | 2/1/01 | Cable | |
Falcon Fine Wire | 98021450-2 | 5/5/06 | Cable Label Shield and Drain Wire | |
James Monroe Wire and Cable Corporation | JM43465 | 9/1/99 |
Comment: | ||
IMSA Type 50-2 Loop Lead-in Cable Polyethylene Insulated 600 Volt Stranded Copper #14 AWG |
Top | Return to Approved Materials |
#10 AWG System Ground Wire and Tracer Wire
Notes | Manufacturer | Catalog Number | Approval Date | Photos |
Advanced Digital Cable | Green - 410GN Red - 410RD UL File # E208489 |
5/20/16 | Ground Cable Mfg Label AWG Label Tracer Cable | |
Cerowire Wire & Cable Co., Inc. | Red – 112-3803 Green – 112-3805 UL file # E15119 |
5/5/03 | ||
Encore Wire LTD | UL file # E123774 | 8/1/03 | ||
Republic Wire | UL File E167613 | 5/8/23 | Label Name Label Cable Type Label UL File | |
Southwire | Green - 22-97-73 Red - 22-97-57 UL file # E23919 |
5/5/03 |
Comment: | ||
Stranded copper #10 AWG THHN/THWN-2 600 volt Tracer wire shall have Red insulation Ground wire shall have Green insulation |
#6 AWG Equipment Ground Wire
Notes | Manufacturer | Catalog Number | Approval Date | Photos |
Advanced Digital Cable | BC06S | 5/20/16 | Bare Copper Cable | |
Cerro Wire & Cable Co, Inc. | Product Number 050-2200 or 050-2215 |
5/5/03 | ||
Encore Wire LTD | Bare No. 6 AWG | 8/1/03 | ||
Service Wire Co | BSOS6 | 5/5/03 | ||
Southwire | Bare No. 6 AWG | 5/5/03 |
Comment: | ||
Bare copper soft drawn solid copper #6 AWG |
Video Detection Cable
Notes | Manufacturer | Catalog Number | Approval Date | Photos |
Econolite Exclusive | Falcon Fine Wire | 970316TS-00-1MP | 1/30/12 | Cable Jacket |
Econolite Exclusive | Isotec | X339313-00 (for Econolite Solo Terra Systems) | 4/25/08 | Cable |
Comment: | ||
16 AWG/3c |
Top | Return to Approved Materials |
Conduit and Fittings
HDPE Signal Conduit
Comment: | ||
Include "City Traffic" in the product line code SDR 13.5 Black with 3 longitudinal white stripes Smooth wall UV Stabilized |
HDPE Service Conduit
Notes | Manufacturer | Catalog Number | Approval Date | Photos |
Blue Diamond Industries | 2" - BDI214BK-RDS 3" - BDI314BK-RDS |
3/9/23 | ||
Dura-Line | 2” – 2SDR135BLK/RED 3” – 3SDR135BLK/RED |
3/8/13 |
Comment: | ||
SDR 13.5 Black with three longitudinal red stripes Smooth wall UV Stabilized |
Top | Return to Approved Materials |
HDPE Couplings
Notes | Manufacturer | Catalog Number | Approval Date | Photos |
American Polywater | Bonduit Conduit Adhesive Use with standard Sch 40 PVC Couplings |
10/11/10 | Cartridge Equipment Nozzle | |
Cabletec | HDPE to HDPE Coupling: 1" - AS 1.315 1-1/2" - AS 1.900 2" - AS 2.375 3" - AS 3.500 4" - AS 4.500 HDPE to PVC Coupling: 1" - ASP 1.315 1-1/2" - ASP 1.900 2" - ASP 2.375 3" - ASP 3.500 4" - ASP 4.500 |
8/2/01 12/22/17 |
||
Dura-Line | HDPE to HDPE Coupling or HDPE to PVC Coupling: ShurLock Couplings 1" - 20000118 1 ½” – 20000122 2" - 20000123 (1-400761) 3" - 20000173 4" - 20000245 |
7/11/14 | Side View Label View End View | |
Georg Fischer/Central Plastics Company | HDPE to HDPE Electrofusion Couplings 1 ½” - 5760028 2” - 5760030 3” - 10000358 4” - 10000360 |
5/5/06 |
Top | Return to Approved Materials |
Schedule 40 PVC Conduit
Comment: | ||
Schedule 40 |
Top | Return to Approved Materials |
Schedule 80 PVC Conduit
Comment: | ||
Schedule 80 PVC shall only be used in above ground applications or exposed on the underside of bridge decks. |
Top | Return to Approved Materials |
Schedule 40 PVC Fittings
Notes | Manufacturer | Catalog Number | Approval Date | Photos |
Part of Atkore International | Allied Tube & Conduit | Standard Couplings: 1” – 59603 1 ½” – 59605 2” – 59606 3" – 59608 4" – 59610 90º Elbows 36” Radius for Power: |
9/3/14 | |
Cantex | Standard Couplings: 1” – 6141625 1 ½” – 6141627 2” – 6141628 3” – 6141630 4” - 6141632 90º Elbows 36” Radius for Power: |
5/5/03 | ||
Part of Atkore International | Heritage Plastics | Standard Couplings: 1” – 610002 1 ½” – 610004 2” – 610005 3” – 610007 4” – 610009 90º Elbows 36” Radius for Power: |
7/24/12 | |
IPEX / Scepter | Standard Couplings: 1” – EC20 / 077003 1 ½” – EC30 / 077005 2” – EC35 / 077006 3” – EC45 / 077008 4” – EC55 / 077010 90º Elbows 36” Radius for Power: |
12/22/05 | ||
Formerly Carlon | Prime Conduit | Standard Couplings: 1” – CP100 1 ½” – CP150 2” – CP200 3” – CP300 4” – CP400 90º Elbows 36” Radius for Power: |
5/26/09 |
Schedule 80 PVC Fittings
Notes | Manufacturer | Catalog Number | Approval Date | Photos |
Part of Atkore International | Allied Tube & Conduit | Standard Couplings: 1” – 59603 1 ½” – 59605 2” – 59606 3" – 59608 4" – 59610 90º Elbows 36” Radius for Power: |
1/29/19 | |
Cantex | Standard Couplings: 1” – 6141625 1 ½" – 6141627 2” – 6141628 3" – 6141630 4" – 6141632 90º Elbows 36” Radius for Power: |
1/29/19 | ||
Part of Atkore International | Heritage Plastics | Standard Couplings: 1” – 59603 1 ½" – 59605 2” – 59606 3” – 59608 4" – 59610 90º Elbows 36” Radius for Power: |
1/29/19 | |
IPEX / Scepter | Standard Couplings: 1” – EC20 1 ½” – ED30 2” – EC35 3” – EC45 4" – ED55 90º Elbows 36” Radius for Power: |
1/29/19 | ||
Prime Conduit | Standard Couplings: 1” – CP100 1 ½” – CP150 2” – CP200 3" – CP300 4” – CP400 90º Elbows 36” Radius for Power: |
1/29/19 |
Comment: | ||
To be used with Schedule 80 PVC conduit |
Top | Return to Approved Materials |
Bridge Expansion Couplings
Top | Return to Approved Materials |
Controller Cabinet
ATC Pad Mount Traffic Signal Cabinet
Notes | Manufacturer | Catalog Number | Approval Date | Photos |
Econolite | Single Wide: ATCC1201 Double Wide: ATCC1202 |
6/16/22 | ||
McCain | Single Wide: 352i Double Wide: 353i |
11/15/18 | Single Cabinet Front View Clean Power Bus Field Input Terminal Input/Output Assembly Power Assembly Rear View Surge Protector | |
Mobotrex | 352 ATC Single Wide 353 ATC Double Wide: Drawing - JBS2353TOP01-Rev 2 |
11/3/21 | Double Cabinet Front View Field Input Terminal Input/Output Assembly Power Assembly Rear View Surge Protector |
Comment: | ||
Includes the following: 24 channel input assembly 16 channel output assembly 8" cabinet riser Corbin Locks MOV's for field outputs Rear mounted field output terminals and field input terminal panels Rear facing panel terminals for pedestrian and EVP 4 fans and 2 thermostats in the double cabinets and 2 fans and 1 thermostat in single cabinets |
332 Pad Mount Traffic Signal Cabinet
Notes | Manufacturer | Catalog Number | Approval Date | Photos |
For Maintenance Use Only | McCain | Model 332 / M35378 | 10/12/11 |
333 Double Pad Mount Traffic Signal Cabinet
Notes | Manufacturer | Catalog Number | Approval Date | Photos |
For Maintenance Use Only | McCain | Model 333JP-OPKS | 6/16/10 |
Comment: | ||
These should be fabricated to “Overland Park Special” configurations |
Detection Systems
Pedestrian Pushbuttons ADA Audible
Comment: | ||
Red LED indicator Auto volume adjustment for ambient noise levels LL = Length of Extension: 06 for 6" or 12 for 12" X = Color: B for Black or Y for Yellow. Audible locator tones shall be set to be audible 6 to 12 feet from the push button, or to the building line, whichever is less. A percussive tone is required where an APS is provided at a signle crossing or where two APS are 10' or more from each other at a corner. Custom Message (Recorded at Factory w/ electronic copy sent to City) where the APS are less than 10' apart. For standard signal poles, the color of the frame, bracket, and adapter, if used, shall be powder coated yellow. The extender shall remain galvanized with no color. For decorative signal poles, the color of the extender, frame, bracket, and adapter, if used, shall be powder coated black. |
Pedestrian Pushbuttons
Notes | Manufacturer | Catalog Number | Approval Date | Photos |
For Maintenance Use Only/or as Specified |
Polara Engineering, Inc. | Bulldog Series Push Button Assembly: BDSP-010-X Pole Mount Adaptor: BDPM3-X Accessories For Maintenance Use Only/or as Specified Push Button Frame 2C with 9"x15" Plate Adapter: PBF2C-9x15-X |
1/26/15 |
Comment: | ||
Yellow body with sound on actuation NO LED Flash LL = Length of Extension: 06 for 6" or 12 for 12" X = Color: B for Black or Y for Yellow. For standard signal poles, the color of the frame, bracket, and adapter, if used, shall be powder coated yellow. The extender shall remain galvanized with no color. For decorative signal poles, the color of the extender, frame, bracket, and adapter, if used, shall be powder coated black. |
Emergency Vehicle Pre-empt (EVP) Detectors
Notes | Manufacturer | Catalog Number | Approval Date | Photos |
Global Traffic Technologies | Model 721 | 2/218/08 | Side View Cable Terminal |
Comment: | ||
Two Direction Single Channel |
Pre-formed Detector Loop
Notes | Manufacturer | Catalog Number | Approval Date | Photos |
Never-Fail Loop Systems | Model A – in or under asphalt Model C – in concrete or bridge decks |
6/6/00 | ||
Patriot Detection | Model CG16MM | 9/1/15 | ||
Purchased by EDI | Reno | Rectangular Loop: Model PLH-XX-YY Quadrupole Loop: Model PLH-XX-YY-ZZ |
7/7/16 |
Advance Radar Detectors
Notes | Manufacturer | Catalog Number | Approval Date | Photos |
Wavetronix | Model WX-SS-200V SmartSensor Advance Unit SDLC Cabinet Interface Device 6 Terminal Ports: Arc6 102-0594 (WX-500-0417) Includes Surge Card: 102-0562 (WX-500-0381) Requires Cabinet Interface Mounting Bracket 102-0486 (WX-500-0394) |
1/10/11 |
Comment: | ||
Include the SDLC Cabinet Interface Module |
Top | Return to Approved Materials |
Presence Radar Detectors
Notes | Manufacturer | Catalog Number | Approval Date | Photos |
Iteris | 4 Approaches with Presence Detection Only Detection System: RAD-SYS-4-BH-SM-TS2 Includes CCU, 4 Sensors, Power Supply and Surge Protection Individual Parts: |
3/11/21 | CCU CCU Side Power Supply Power Supply Side Surge Protector Bracket | |
Wavetronix | Model WX-SS-225 SmartSensor Matrix Presence Unit SDLC Cabinet Interface Device 6 Terminal Ports: Arc6 102-0594 (WX-500-0417) Includes Surge Card: 102-0562 (WX-500-0381) Requires Cabinet Interface Mounting Bracket 102-0486 (WX-500-0394) |
5/30/13 | SDLC Interface Front View SDLC Interface Back View SDLC Interface Iso View SDLC Interface Surge Protector Card Sensor Cable Ports SDLC Module Wire Plug |
Comment: | ||
For Wavetronix: Include the SDLC Interface Module |
Vehicle Detectors (Loops)
Notes | Manufacturer | Catalog Number | Approval Date | Photos |
Global Traffic Technologies bought out 3M |
Global Traffic Technologies / 3M / Canoga |
Model C922 – Two Channel Model C924 – Four Channel |
2/18/08 | |
Purchased by EDI | Reno | Model C-1200-SS Series – Two Channel Model E-1200-SS Series – Four Channel |
2/10/12 |
Comment: | ||
It shall have TS2 status output available |
Video Detection Systems
Notes | Manufacturer | Catalog Number | Approval Date | Photos | Comments |
Used for Maintenance Replacements Only | Econolite/Autoscope Encore MVP | Image Sensor: AENCORENP Interface Panel: ATIP1 Access Point: ATAPE Interface Cable Kit: ASTCBL10 SDLC Cable Harness: 33550G5 |
9/11/13 | Easy-Lock Harting Connector On-Board Ethernet Port SDLC Cable Harness for TS-2 Comm to ASC/3 – Rack Mount Controller | |
Used for Maintenance Replacements Only | Econolite/Autoscope Terra Rack Vision | AIS Image Sensor: AIS4HCRZOOMU0S Camera Interface Panel: AIPx Coaxial Jumper Cable: RG59 Processor Card: ARVTERRA1E SDLC Cable Harness: 33550G5 |
5/17/07 | Easy-Lock Harting Connector x = number of cameras to be connected to the interface panel (1 to 6) On-Board Ethernet Port | |
Used for Maintenance Replacements Only | Gridsmart | Fisheye Camera Assembly: GS3-SMK Processor: GS-3-GS2 Fisheye Camera Replacement Only: GS-3-CAM Mounting Bracket: GS-3-CBL |
5/20/20 | Fisheye Camera Side View Pole Assembly Camera Mount Junction Box Processor RJ-45 Connector Cable Harness |
One CPU handles 1 fisheye camera and up to 3 traditional cameras or 2 fisheye cameras |
Used for Maintenance Replacements Only | ITS PLUS3, Inc. | Advanced VIVDS Camera: ITSP-PM120C Dual Channel VIVDS Card w/ Ethernet: ITSP-V200E |
1/27/17 | Camera Front Detection Card |
Top | Return to Approved Materials |
Grounding Equipment
Ground Rod
Comment: | ||
5/8” x 10’-0” long at poles and controller cabinet 5/8” x 8’-0” long at service boxes Copper clad steel core UL listed |
Ground Rod Clamp
Notes | Manufacturer | Catalog Number | Approval Date | Photos |
Burndy | GRC58 – 5/8” | 2/27/02 | Clamp | |
Erico Inc. | HDC58 – 5/8” | 12/1/05 | ||
Galvan Industries | SRC – 5/8” | 12/20/13 | ||
Thomas & Betts | JAB58H - 5/8" | 5/5/03 |
Comment: | ||
Hex head set screw Copper alloy Long bearing surface UL listed |
Top | Return to Approved Materials |
Junction and Service Boxes
Type 1 Junction Box
Notes | Manufacturer | Catalog Number | Approval Date | Photos |
Armorcast | A6001423TA – Assembly A6001422T – Cover only A6001423 – Box only |
1/11/01 | ||
J&H | APC121212T22 - Assembly | 5/2/2024 | Side View Top View Angle | |
New Basis | Cover Label PCB121212-00000 – Box only PCC1212PC1-90005 – Cover only PCA121212-00030 - Assembly |
8/8/03 | Side View Top View Cover Bolt Hole | |
Oldcastle Infrastructure | 12122001 - Body Only 12124405 - Lid Only |
6/5/14 | ||
Quazite was purchased by Hubbell Power Systems |
Quazite | PC1212BA12 – Box only PC1212HA0046 – Cover only PC1212Z50346 - Assembly Cover Codes |
5/5/03 |
Comment: | ||
Minimum Box Assembly Rating - Tier 15 (22,500 lbs test load) Logo to read “Traffic Signal” 1 Piece cover to be ¾” min thick Straight wall No mouseholes 3/8” – 16 NC stainless steel hex head bolts and washers |
Type 2 Junction Box
Comment: | ||
Minimum Box Assembly Rating - Tier 15 (22,500 lbs test load) Logo to read “Traffic Signal” 1 Piece cover to be 2” thick Straight wall No mouseholes 3/8” – 16 NC hex head bolts and washers |
Type 1 Service Box
Notes | Manufacturer | Catalog Number | Approval Date | Photos |
Armorcast | A6001974TAPCX24 - Assembly A6001975T – Cover only A6001974PCX24 – Box only |
7/30/01 | End View Top View Bottom View | |
J&H | APC243624 - Assembly | 5/2/2024 | Side View 1 Side View 2 Top View Angle | |
Channell Commercial Corp | BULKU243624F061010 - Assembly BULKUA2436E061010 - Cover only BULKUA2436240 - Box only |
8/5/16 | Cover Ground Wire | |
New Basis | Cover Label PCB24362400000 – Box only PCC2436P1-00030 – Cover only PCA243624-00030 – Assembly |
2/26/02 | ||
Oldcastle Infrastructure | 24362214 - Body Only 24364613 - Lid Only 24361616 - Unit |
6/5/14 | ||
Quazite was purchased by Hubbell Power Systems |
Quazite | PG2436BA24 – Box only PG2436HA0046 – Cover only PG2436Z50246 - Assembly Cover Codes |
5/5/03 |
Comment: | ||
Minimum Box Assembly Rating - Tier 15 (22,500 lbs test load) Logo to read “Traffic Signal” 1 Piece cover to be 3” thick Straight wall No mouseholes 3/8” – 16 NC hex head bolts and washers |
Type 2 Service Box
Notes | Manufacturer | Catalog Number | Approval Date | Photos |
Armorcast | A6001430TAPCX24 – Assembly A6001470T (2 pc. Req.) – Cover only A6001430PCX24 – Box only |
7/30/01 | Side View End View | |
J&H | APC304836 - Assembly | 5/2/2024 | Side View 1 Side View 2 Top View Angle | |
Channell Commercial Corp | BULKU304824F081010 - Assembly BULKUA3048E081010 - Cover Only BULKUA3048240 - Box only |
8/5/16 | Cover Ground Wire | |
New Basis | Cover Label PCB30482400000 – Box only PCC3048P2-90039 – Cover only PCA304824-00062 – Assembly |
2/26/02 | Side View | |
Oldcastle Infrastructure | 30482021 - Body Only 30484611 - Lid Only |
6/5/14 | ||
Quazite was purchased by Hubbell Power Systems |
Quazite | PG3048BA24 – Box only PG3048HS0046 – Cover only PG3048Z52546 - Assembly Cover Codes |
5/5/03 |
Comment: | ||
Minimum Box Assembly Rating - Tier 15 (22,500 lbs test load) Logo to read “Traffic Signal” 2 Piece cover to be 3” thick underlapping Straight wall No mouseholes 3/8” – 16 NC hex head bolts and washers |
Top | Return to Approved Materials |
LED Units
Red LED Arrow
Notes | Manufacturer | Catalog Number | Approval Date | Photos |
DiaLight | 432-1314-001XOD15 | 11/13/19 | Front View Back View Label | |
Leotek | TSL-12RA-DT-A1 | 11/13/19 | Front View Back View |
Comment: | ||
Tinted lens Incandescent look 15 Year Warranty |
Yellow LED Arrow
Notes | Manufacturer | Catalog Number | Approval Date | Photos |
DiaLight | 431-3334-901XOD15 | 11/13/19 | Front View Back View Label | |
Leotek | TSL-12YA-DT-A1 | 11/13/19 | Front View Back View |
Comment: | ||
Tinted lens Incandescent look 15 Year Warranty |
Green LED Arrow
Notes | Manufacturer | Catalog Number | Approval Date | Photos |
DiaLight | 432-2324-001XOD15 | 11/13/19 | Front View Wiring | |
Leotek | TSL-12GA-DT-A1 | 11/13/19 | Front View Back View |
Comment: | ||
Tinted lens Incandescent look 15 Year Warranty |
Bi-Modal Green/Yellow LED Arrow
Notes | Manufacturer | Catalog Number | Approval Date | Photos |
DiaLight | 430-6370-001 | 4/30/10 | ||
GE | DR6-ECA6-21A | 12/8/16 | ||
Leotek | TSL-12BM-LD-A1 | 4/3/18 | Front View Back View Label |
Comment: | ||
Clear Lens, pixilated arrow |
Red Ball LED
Notes | Manufacturer | Catalog Number | Approval Date | Photos |
DiaLight | DuraLED 433-1210-003XL15 | 11/13/19 | Front View Back View Label | |
Leotek | TSL-12R-DT-A1 | 11/13/19 | Front View Back View |
Comment: | ||
Tinted lens Incandescent look 15 Year Warranty |
Yellow Ball LED
Notes | Manufacturer | Catalog Number | Approval Date | Photos |
DiaLight | DuraLED 433-3230-901XL15 | 11/13/19 | Front View Back View Label | |
Leotek | TSL-12Y-DT-A1 | 11/13/19 | Front View Back View Yellow Ball Label |
Comment: | ||
Tinted lens Incandescent look 15 Year Warranty |
Green Ball LED
Notes | Manufacturer | Catalog Number | Approval Date | Photos |
DiaLight | DuraLED 433-2220-001XL15 | 11/13/19 | Front View Back View Label | |
Leotek | TSL-12G-DT-A1 | 11/13/19 | Front View Back View |
Comment: | ||
Tinted lens Incandescent look 15 Year Warranty |
Countdown Pedestrian LED
Notes | Manufacturer | Catalog Number | Approval Date | Photos |
DiaLight | 430-6479-001X | 4/30/10 | ||
GE | GTX City Series: PS7-CFF1-VLA | 12/8/16 | Front View Back View Gasket Countdown View | |
Leotek | TSL-PED-16-SPC-V1 | 4/3/18 | Front View Label Back View |
Comment: | ||
16” X 18” Hand/Person display symbol Orange/White display color Incandescent look Filled/Overlay Style 9” Numerals |
Loop Sealants
Notes | Manufacturer | Catalog Number | Approval Date | Photos |
3M | 5000 | 5/5/03 | ||
Purchased by Royal Adhesives & Sealants Under acquisition by HB Fuller |
Chemque | Q-Seal 290S - Grey or Black | 10/23/03 | |
Crafco Inc | RoadSaver 221, Part No. 34221 | 5/5/03 | ||
Ruscoe Highway Products | Permanent Sealer 974 – Gray or Black | 7/3/13 |
Top | Return to Approved Materials |
Miscellaneous Controller Equipment
ATC Cabinet Specific Equipment
ATC Controller
Notes | Manufacturer | Catalog Number | Approval Date | Photos |
Econolite | 2070EOS1D6500 w/EOS | 11/8/21 | ||
McCain | ATC eX 2070 PN: M46541 | 10/16/18 | ||
Q-Free / Intelight | YCT-2070LX-MT Individual Component Parts: Controller: 2070LX FIO Module: 2070-2E+ 1C CPU Module: 2070-1C Software:MAXTIME 1C |
11/4/21 |
Comment: | ||
With Data Key Firmware shall be provided with the controller |
ATC Cabinet Power Supply
Notes | Manufacturer | Catalog Number | Approval Date | Photos |
EDI / Eberle Design Inc | PS-2216-24-HV | 10/16/18 |
Comment: | ||
Used only in ATC Cabinet. |
Auxiliary Display Unit (ADU)
Notes | Manufacturer | Catalog Number | Approval Date | Photos |
EDI / Eberle Design Inc. | ADU | 10/16/18 |
Comment: | ||
Used only in ATC Cabinet |
Cabinet Alarm Panel
Notes | Manufacturer | Catalog Number | Approval Date | Photos |
Econolite | 177-1018-501 | 6/16/22 | ||
McCain Traffic | 2521 - Cabinet Alarm Panel and Harness | 11/3/21 | Front View Back View | |
Mobotrex | AAD18150-001 | 11/8/21 |
Comment: | ||
Used only in ATC Cabinet |
Cabinet Monitor Unit (CMU)
Notes | Manufacturer | Catalog Number | Approval Date | Photos |
EDI / Eberle Design Inc. | CMUip-2212-HV | 10/16/18 | Front View Side View |
Comment: | ||
Used only in ATC traffic signal cabinet in place of the conflict monitor |
ATC Flasher
Notes | Manufacturer | Catalog Number | Approval Date | Photos |
EDI / Eberle Design Inc. | 2202-HV | 10/16/18 | Front View Side View |
Comment: | ||
Used only in ATC Cabinet. Part is also used for the High Density Switch Pack / Load Switch in ATC Cabinet |
High Density Flash Transfer Relay
Notes | Manufacturer | Catalog Number | Approval Date | Photos |
Struthers-Dunn | 21XBXHL-48VDC | 10/16/18 | Front View Side View |
Comment: | ||
Used only in ATC Cabinet. |
High Density Switch Pack / Load Switch
Notes | Manufacturer | Catalog Number | Approval Date | Photos |
EDI / Eberle Design Inc. | 2202-HV | 10/16/18 |
Comment: | ||
Used only in ATC Cabinet. Part is also used for the Flasher in ATC Cabinet |
Serial Interface Unit (SIU)
Notes | Manufacturer | Catalog Number | Approval Date | Photos |
EDI / Eberle Design Inc. | SIU-2218 | 10/16/18 | Front View |
Comment: | ||
Only used in ATC Cabinet |
General Cabinet Equipment
1C CPU Module
Notes | Manufacturer | Catalog Number | Approval Date | Photos |
Econolite | Model 2070-1C | 2/15/17 | Front View Side View |
Comment: | ||
For use in upgrading existing 2070 controllers only |
AC Isolator
Notes | Manufacturer | Catalog Number | Approval Date | Photos |
GDI Communications | ACIM252 | 5/5/03 | ||
PDC / Power Distribution & Control | ACI-88 Model 252 | 5/5/03 |
Comment: | ||
Model 252 |
Auxiliary Output File
Notes | Manufacturer | Catalog Number | Approval Date | Photos |
McCain Traffic | CABSP-1521020033X KS | 2/26/20 | Front View Back View Top View |
Comment: | ||
With AC Jumper for 15 Pin Connection |
Conflict Monitor
Notes | Manufacturer | Catalog Number | Approval Date | Photos |
EDI / Eberle Design, Inc. | 2018 KCLip – (Std 332 Cabinet) with Datakey programming and Ethernet port |
2/19/09 | Front View Side View |
Comment: | ||
Not used with Hybrid Cabinet. See “Malfunction Management Unit” below Not used with ATC Cabinet. See “Conflict Management Unit” below |
Controller
Notes | Manufacturer | Catalog Number | Approval Date | Photos |
For Hybrid Cabinets Only | Safetran/Econolite Control Products, Inc. | Model Cobalt-C | 2/26/16 | Front View Back View |
Comment: | ||
With Data Key Firmware shall be provided with the controller |
DC Isolator
Notes | Manufacturer | Catalog Number | Approval Date | Photos |
EDI | 242L | 10/12/21 | Front View | |
GDI Communications | DIM242 | 5/5/03 | ||
PDC / Power Distribution & Control | DCI-82 Model 242 | 5/5/03 | Front View Side View |
Comment: | ||
Model 242 Not used with Hybrid Cabinet. See “Detector Test Switch Module” below. |
Flash Transfer Relay
Notes | Manufacturer | Catalog Number | Approval Date | Photos |
Purchased by EDI | Reno A&E | TR-200 | 11/3/05 | Side Back |
Struthers-Dunn | W21ACPX-2 | 8/6/20 | Front |
Comment: | ||
Model 430 Not used with ATC Cabinet. See “High Density Flash Transfer Relay” below |
Flasher Unit
Notes | Manufacturer | Catalog Number | Approval Date | Photos |
EDI / Eberle Design, Inc. | EDI 204 | 5/5/03 | ||
GDI Communications | FL204 | 5/5/03 | ||
PDC / Power Distribution & Control | SSF-88 | 5/5/03 | ||
Purchased by EDI | Reno A&E | FL-200 | 11/3/05 | |
TSC / Traffic Sensor Corp | TSC 204 | 5/5/03 |
Comment: | ||
Model 204 Not used with ATC Cabinet. See “High Density Switch Pack” below |
Power Distribution Assembly (PDA)
Notes | Manufacturer | Catalog Number | Approval Date | Photos |
McCain | PDA#2 M63186 | 7/14/10 |
Power Distribution Surge Protection Unit
Notes | Manufacturer | Catalog Number | Approval Date | Photos |
MTL Instruments Group is the umbrella company |
Cooper/Crouse-Hinds/ Atlantic Scientific |
RP35326 | 10/28/2008 | Front View Back View Top View Indicator Lights |
Geist Manufacturing, Inc. | SPX084-10 | 11/4/05 |
Comment: | ||
Room for 4 to 6 transformer spaced outlets on one side and 4 to 6 standard outlets on the other side 15 amp breaker Rack mounted NEMA 5-15 |
Power Supply
Notes | Manufacturer | Catalog Number | Approval Date | Photos |
EDI | Model 206L | 7/9/10 |
Comment: | ||
High efficiency power saving w/ solid state transfer relay |
Pre-empt Phase Selectors / Discriminator Module
Notes | Manufacturer | Catalog Number | Approval Date | Photos |
Global Traffic Technologies | Model 762 – Two Channel Model 764 – Four Channel Model 768 Auxiliary Interface Panel (If specified) |
4/19/11 | 764 Phase Selector |
Comment: | ||
With Ethernet Ports |
Switchpack / Load Switch
Notes | Manufacturer | Catalog Number | Approval Date | Photos |
GDI Communications | LS200-6 | 5/5/03 | ||
PDC / Power Distribution & Control | SSS-87IO | 5/5/03 | Front View Side View | |
Purchased by EDI | Reno A&E | LS-200 | 11/3/05 | Front View |
TSC / Traffic Sensor Corp | TSC200 | 5/5/03 |
Comment: | ||
Model 200 with Input and Output monitoring Not used with ATC Cabinet. See “High Density Switch Pack” above |
Surge Protector (Traffic Signal Cabinet)
Notes | Manufacturer | Catalog Number | Approval Date | Photos |
Edco/Emerson Network Power | SHA-1250 w/ SHA-1250-BASE-A | 8/5/10 | ||
Hesco/RLS | HE1750 | 10/16/18 |
Comment: | ||
For Hybrid, 332 and ATC Cabinets |
Utility Power Surge Protector (Secondary Service Enclosure)
Notes | Manufacturer | Catalog Number | Approval Date | Photos |
Partners with Pentair Engineered Electrical & Fastening Systems |
Nvent/Erico / Critec | TDX-100S120240 | 11/26/14 | Top View Pull Out Drawer Top Inside View Replacement Module |
Comment: | ||
Note: NEMA-4 weather tight housing Output contacts Replaceable cartridge overcurrent fuse protection Replaceable modules Event timer |
Top | Return to Approved Materials |
Hybrid Cabinet Specific Equipment
Bus Interface Unit (BIU)
Notes | Manufacturer | Catalog Number | Approval Date | Photos |
Maintenance Use Only | EDI / Eberle Design Inc. | BIU-700H | 10/17/18 | |
Maintenance Use Only | Econolite | 160-1003-505 | 10/6/11 | Front View Side View |
Comment: | ||
½ width design - Only used with Hybrid Cabinet |
Malfunction Management Unit (MMU)
Notes | Manufacturer | Catalog Number | Approval Date | Photos |
Maintenance Use Only | EDI / Eberle Design Inc. | MMU2-16-LE(ip) | 1/10/13 | Front View Back View |
Comment: | ||
Only used in Hybrid traffic signal cabinet in place of the conflict monitor |
K1 Control Relay
Notes | Manufacturer | Catalog Number | Approval Date | Photos |
Maintenance Use Only | Econolite | Dwg No. 54408 Rev U | 4/6/15 | |
Maintenance Use Only | Tyco Electronics / Potter & Brumfield |
KRPA-14AGP-120 | 2/10/11 | Side View |
Comment: | ||
Only used with Hybrid Cabinet |
Top | Return to Approved Materials |
Mounting Brackets
Mast Arm Signal Head Bracket
Notes | Manufacturer | Catalog Number | Approval Date | Photos |
Pelco | AG-0125-1-LL-PXX (1-Section) AG-0125-3-LL-PXX (3-Section) AG-0125-4-LL-PXX (4-Section) AG-0168-LL-PXX (HAWK) |
4/19/19 4/19/19 |
Open Hinge View Top View Side View | |
A Division of Olson Aluminum Castings |
Sky Bracket | SS-SBLL-18 (1-Section) SS-SBLL-46 (3-Section) SS-SBLL-60 (4-Section) SS-SBLL_HPB-18 (HAWK) |
1/11/19 1/11/19 |
Shown with previously approved cable mounting system. Front View Side View Back View Lower Arm Upper Arm Tube Section |
Comment: | ||
Stainless steel banding/cable and hardware For Pelco: Required cable length (LL) to be determined by contractor based on manufacturer's recommendations as follows: 62" – for mast arm diameters ranging from 2” to 7” 84" – for mast arm diameters ranging from 7.1” to 10.5” 96" – for mast arm diameters ranging from 10.6” to 12.4” 110" – for mast arm diameters ranging from 12.5” to 14.6” 120" – for mast arm diameters ranging from 14.7” to 16.2” 132" – for mast arm diameters ranging from 16.3” to 18.2” Color (XX) shall be as follows: NC - No Color 33 - Glossy Black 71 - RAL6012 Green 39 - RAL8019 Dark Bronze For Sky Bracket: Required band length (LL) to be determined by contractor based on manufacturer's recommendations as follows: 29” – for mast arm diameters ranging from 2” to 7” 42” – for mast arm diameters ranging from 8” to 11” 59” – for mast arm diameters ranging from 12” to 17” If other than standard color, specify SB-BLK for Black Powder Coat or SP-SPL for Special Color Powder Coat |
Mini Pre-empt Detector Bracket
Notes | Manufacturer | Catalog Number | Approval Date | Photos |
Pelco Products, Inc. | Band Mount Astro Brac AB-0155-LL-PXX Cable Mount Astro Brac AB-0163-LL-PXX |
1/11/19 12/29/04 |
||
Sky Bracket | SBLL-MM-075 | 11/25/19 | Back |
Comment: | ||
Stainless Steel banding or cable mount LL = Banding Length Based on Mast Arm Diameter: 29” – for mast arm diameters ranging from 2” to 7” 42" – for mast arm diameters ranging from 8” to 11” 59" – for mast arm diameters ranging from 12” to 17) LL = Cable Length Based on Mast Arm Diameter: 45" - for mast arm diameters ranging from 2" to 11" 62" - for mast arm diameters ranging from 11.1" to 16.6" 84" - for mast arm diameters ranging from 16.7" to 22" Color (XX) shall be as follows: NC - No Color 33 - Glossy Black 71 - RAL6012 Green 39 - RAL8019 Dark Bronze |
Radar Detector Mounting Bracket
Notes | Manufacturer | Catalog Number | Approval Date | Photos |
For a Presence sensor mounted on a mast arm. For an Advance sensor mounted on a mast arm. |
Pelco Inc. | SP-5987-23-LL-PXX | 8/6/19 | Open Hinge View Top View Side View |
For a Presence sensor mounted on a mast arm. For an Advance sensor mounted on a mast arm. |
Sky Bracket | Bracket: SS-SBLL-ACM-24 Burle Style Adapter Plate: SB-PLT |
1/11/19 | Showing previously approved cable mounting system. Front View Side View Back View Mounting End Tube Section |
For a Presence sensor mounted on a vertical pole. For an Advance sensor mounted on a mast arm or a vertical pole. |
Wavetronix | WX-SS-611 | 4/29/16 | Top View Side View Connection Segments |
Comment: | ||
Stainless steel banding/cable and hardware For Pelco: Required cable length (LL) to be determined by contractor based on manufacturer's recommendations as follows: 62" – for mast arm diameters ranging from 2” to 7” 84" – for mast arm diameters ranging from 7.1” to 10.5” 96" – for mast arm diameters ranging from 10.6” to 12.4” 110" – for mast arm diameters ranging from 12.5” to 14.6” 120" – for mast arm diameters ranging from 14.7” to 16.2” 132" – for mast arm diameters ranging from 16.3” to 18.2” Color (XX) shall be as follows: NC - No Color 33 - Glossy Black 71 - RAL6012 Green 39 - RAL8019 Dark Bronze For SkyBracket: Required banding length (LL) to be determined by contractor based on manufacturer's recommendations as follows: 29” – for mast arm diameters ranging from 2” to 7” 42” – for mast arm diameters ranging from 8” to 11” 59” – for mast arm diameters ranging from 12” to 17” If other than standard color, specify SB-BLK for Black Powder Coat or SP-SPL for Special Color Powder Coat |
Side Mount Signal Head and Pedestrian Signal Head Bracket
Notes | Manufacturer | Catalog Number | Approval Date | Photos |
Auto/Eagle | UKS-1452X | 5/5/03 | ||
Component Products, Inc. | TSP880-X | 5/5/03 | ||
Gades | UKS1452X / PDM-405 | 5/5/03 |
Comment: | ||
Yellow polycarbonate X=Y for Yellow X= B for Black |
Top | Return to Approved Materials |
Poles
Aluminum Pedestal Poles
Comment: | ||
See "Anchor Bolts" for part number information Pole tube is schedule 40 Include base collar with every pole Set screws required in base collar Include 2 7/8” OD x 7/8” ID galvanized flat washers Include anchor bolts |
Galvanized Steel Signal Poles
Notes | Manufacturer | Catalog Number | Approval Date | Photos |
Millerbernd Manufacturing Company | 1994 AASHTO: 780B661 2013 AASHTO: 780B1885 Rev D Identification Label: Single Arm : Double Arm |
8/10/10 11/10/14 |
||
Union Metal | 1994 AASHTO: 50915-B1 Rev 9 2013 AASHTO: 50915-B19 Rev 6.1 |
10/27/04 8/31/15 |
||
Valmont | 1994 AASHTO: DB00175 Rev E 2013 AASHTO: DB01086 Rev H |
1/26/12 7/28/14 |
Comment: | ||
See "Anchor Bolts" for part number information Shall meet 2013 AASHTO Criteria unless otherwise specified in the bid plans, documents and details 2013 AASHTO criteria is for a 50-year recurrence interval, fatigue category 2 but does not include design to resist galloping or truck induced gusts |
Pedestrian Pushbutton Pole and Foundation
Notes | Manufacturer | Catalog Number | Approval Date | Photos |
Frey Manufacturing Corp. | Pedestrian Pushbutton Pole with Pole Cap: CP6ACT4840TCSS / Dwg No. 8.1.0 Rev. 1 Pedestrian Pushbutton Pole Cap: TCSS Top Cap with Set Screws for 4" Pipe / Dwg No. 8.4.1 Rev. 1 |
11/30/17 | Pedestrian Pole Breakaway Base Breakaway Base Angle Pedestal Door Pole Cap Bolts |
Comment: | ||
Frey Mfg pole requires approved Two-Part Epoxy. |
Power Backup Systems
CNG Generators
Notes | Manufacturer | Catalog Number | Approval Date | Photos |
Alpha Technologies | AlphaGen CE-3x2-50-48 NG with Cold Weather Starting Kit With PCC-3x Polymer Concrete Pre-Cast Pad Includes Alpha supplied battery DO NOT PROVIDE WITH TRANSFORMER AND FUSE |
6/17/03 |
Comment: | ||
48V DC output voltage 96 amp max DC output current 10.5 Hp single OHV engine 13.5 VDC Ignition Charger Voltage 6 amp max Ignition Charger Current 2800 to 3600 RPM variable speed 80 CuFt/hr Natural Gas, 1000 BTU/CuFt 0.5 – 2 PSI Gas Inlet Pressure |
UPS Systems
Comment: | ||
Ethernet port capabilities See Battery requirements below. Use ONLY the specified batteries as listed for each UPS system as listed in the table below. |
Top | Return to Approved Materials |
Power Transfer Switches
Notes | Manufacturer | Catalog Number | Approval Date | Photos |
Photos are from previous version of switch (SPH-302). | Clary Corporation | Switch: SPH-303 Mounting Bracket: UPS-BRACKET SPH303 |
4/2/21 | Front View Cable Connections UPS Connection View Label |
Comment: | ||
This is used when there is not battery backup / UPS or CNG generator backup power specified |
Batteries
Batteries for UPS
Notes | Manufacturer | Catalog Number | Approval Date | Photos | Comments |
Clary | OP72C-41 – Batteries (set of six) 72-volt system (Stand alone BBS) OP96C-41 – Batteries (set of eight) 48-volt system (Combined BBS/CNG) |
10/7/11 | Battery Battery String |
Absorbed Glass Mat (AGM) Valve Regulated , Lead Acid (VRLA) |
Batteries for CNG Generator
Notes | Manufacturer | Catalog Number | Approval Date | Photos | Comments |
Alpha | Model 195 GXL | 1/18/12 | Gel Top AGM Terminal Battery (4 Year Full Replacement Warranty) |
Rebar Support Products
Support Spacers
Notes | Manufacturer | Catalog Number | Approval Date | Photos |
Foundation Technologies, Inc | Drill Shaft Wheels: SS406 - 3" Clearance SS303 - 1 1/2" Clearance Support Boots: BB711 |
1/12/21 | ||
Pieresearch | Drill Shaft Wheels: 6QLHD - 3" Clearance 4QLHD - 2" Clearance Technical Drawing Support Boots: #5 - #14 Bars: 3PB Technical Drawing |
7/12/19 | ||
Rebar Support Products | Drill Shaft Wheels: DP300 - 3" Clearance DP200 - 2" Clearance Support Boots: #3 - #8 Bars: BB38 #8 - #11 Bars: BB811 |
7/12/19 |
Comment: | ||
Number of Wheels Min number per tier: 4 Min spacing from top of shaft: 6' Max spacing from bottom of shaft: 2' Max spacing along shaft: 8' Number of Pier Supports One per every 1,500 lbs of cage weight Min one on every other vertical bar |
Top | Return to Approved Materials |
Secondary Service Pedestals
Aluminum Electrical Service Enclosure
Notes | Manufacturer | Catalog Number | Approval Date | Photos |
Myers Custom Products, Inc. | MEA-IIVLM-TS-R-LB | 4/19/19 | ||
Purchased by Myers Custom Products, Inc |
Pacific Utility Products | USP2R-100-112C-OPK-TS-AL-LBP | 2/17/12 | Front View Interior View Meter Socket Lock Breaker Bottom View |
Comment: | ||
0.125” Aluminum, 30 amp breaker Corbin #2 lock on door No photocell or lighting relays Ringless Meter Socket with Lever By-Pass |
Top | Return to Approved Materials |
Battery Backup / Electrical Service Enclosure
Notes | Manufacturer | Catalog Number | Approval Date | Photos |
USED ONLY FOR MAINTENANCE REPLACEMENTS | Myers Custom Products, Inc. | Cabinet – MET2-PB-M030-AC-EMI Drawing No. F518506 |
8/23/05 | |
USED ONLY FOR MAINTENANCE REPLACEMENTS | Pacific Utility Products | Cabinet – USP29-57-BBS | 7/9/10 | |
USED ONLY FOR MAINTENANCE REPLACEMENTS | Traffic Signal Controls | Cabinet – 2116UPME1401 | 9/3/09 |
Comment: | ||
0.125” aluminum Manual transfer switch behind police door For use with external portable generator See below for External Generator Receptacle data 20Amp breaker for CCTV Camera Disconnect |
Battery Backup to CNG Electrical Service Enclosure
Notes | Manufacturer | Catalog Number | Approval Date | Photos |
USED ONLY FOR MAINTENANCE REPLACEMENTS | Myers Custom Products, Inc. | Cabinet – MET2-PB-M030-DC-EMI Drawing No. F518507 |
8/23/05 | |
USED ONLY FOR MAINTENANCE REPLACEMENTS | Pacific Utility Products | Cabinet – USP29-57-BBS | 7/9/10 | |
USED ONLY FOR MAINTENANCE REPLACEMENTS | Traffic Signal Controls | Cabinet-2116UPME1401 | 9/3/09 |
Comment: | ||
0.125” aluminum For use with permanent CNG generator and gas service line 20Amp breaker for CCTV Camera Disconnect |
CNG External Generator Receptacle
Notes | Manufacturer | Catalog Number | Approval Date | Photos |
Hubbell | HBL2710SW including HBL2715 flanged receptacle | 4/2/12 | ||
Reliance Controls | PK30 Power Inlet Kit, including L1430F flanged receptacle | 4/2/12 |
Comment: | ||
Twist Lock Recessed Male, 30 Amp 120/240 Volt, 4 prong including ground with outdoor hinged cover |
Top | Return to Approved Materials |
Signal Heads
Signal Head Louvers
Notes | Manufacturer | Catalog Number | Approval Date | Photos |
Pelco | GL-1010-X-UC-P02 | 11/14/14 |
Comment: | ||
Geometrically programmed louver with black visor X = 7, 8, 9, 11, 12, 15, 23.5 or 42 degrees depending on the cut-off angle desired. The maximum number of louvers comes with the 7 degree cut-off UC = Universal Clips P02 = Black |
Top | Return to Approved Materials |
Vehicular Signal Heads
Comment: | ||
Yellow Polycarbonate Body (Standard) Black Polycarbonate Body (Special) Black Polycarbonate Doors and Visors Visors to be Tunnel Type LED retrofit 12” Sections |
Countdown Pedestrian Signal Heads
Comment: | ||
Yellow polycarbonate body (Standard) Black polycarbonate body (Special) Black Door / No Z-Crate Visor Port hole mount |
Top | Return to Approved Materials |
Wire Connectors
Wire Connectors for Loop Lead-In
Notes | Manufacturer | Catalog Number | Approval Date | Photos |
King Innovation/Dryconn | For 2 #14 AWG Aqua/Orange Waterproof Connector 62110 - Card of 6 62125 - Bag of 25 62135 - Bag of 100 62150 - Bag of 500 For 2, 3, 4 or 5 #14 AWG Auqua/Red Waterproof Connector 62210 - Card of 5 62225 - Bag of 20 62235 - Bag of 100 62250 - Box of 500 For 4, 5 or 6 #14 AWG Aqua/Blue Waterproof Connector 62310 – Card of 3 62325 – Bag of 15 62335 – Bag of 50 62340 – Bag of 250 |
10/14/03 | Aqua/Blue |
Comment: | ||
Wire Range: Min. #14 AWG / Max. #6 AWG Copper Silicone Sealant Filled Watertight/raintight |
Wire Connectors for Multi-Conductor Signal Cable
Notes | Manufacturer | Catalog Number | Approval Date | Photos |
King Innovation/Dryconn | For 2, 3, 4 or 5 #14 AWG King 4 Yellow: 10444 - Bag of 10 For 2, 3, 4 or 5 #14 AWG King 5 Red: 10555 - Bag of 10 For 2, 3, 4 or 5 #14 AWG King 6 Blue: 10670 - Box of 100 For 4, 5 or 6 #14 King 9 Dark Blue: 10975 - Box of 75 |
10/14/03 | King 6 Blue |
Comment: | ||
Wire Range: Min. #22 AWG / Max. #8 AWG Copper Silicone Sealant Filled Direct Burial |
Wire Connectors for Radar Detector Cable
Notes | Manufacturer | Catalog Number | Approval Date | Photos |
3M | Scotchlok Butt Connector: UAL(BX) 100/box, 10 boxes/case |
6/14/17 | Top View Side View |
Comment: | ||
Wire Range: Min. #24 AWG / #19 AWG Max. Copper |
Epoxy
Two-Part Epoxy for Concrete
Notes | Manufacturer | Catalog Number | Approval Date | Photos |
HILTI | HIT-RE 500-V3 | 12/4/2017 | ||
ITW Commercial Construction | Red Head Concrete Anchoring Solutions - A7+ | 12/4/2017 | ||
Powers | PE1000+ | 12/4/2017 | ||
Simpson Strong-Tie | SET-XP | 12/4/2017 |
Comment: | ||
Shall be classified as a concrete anchor for use in cracked or uncracked concrete. Shall be dispensed with a dual-chamber cartridge with a static mixing nozzel which attaches to the cartridge. |
Rivet Nuts
Rivet Nuts and Installation Tools for Pushbutton Poles
Notes | Manufacturer | Catalog Number | Approval Date | Photos |
During pedestrian pushbutton pole ordering request appropriate number of rivet nuts and installation tool. | Frey Manufacturing Corp. | Rivet Nut/Insert Nut: Part Number IN1/4 Installation Tool: Part Number WT1/4 |
12/4/2017 | Revit Nut with Tool and Bolt |
Fastenal | Rivet Nut 1/4-20 .165-.260 | 12/4/2017 | ||
Expendable tool listed as well for installation. | AVK Industrial Products | Threaded Insert ARS4T-420-500 |
12/4/2017 |
Comment: | ||
Size 1/4-20 and Yellow Zinc Plated. Drill 25/64" holes. Other tools for rivet nut insertion available. 1/4"-20 x 1-1/2" phillips drive flat head stainless steel machine screw recommended for pushbutton attachment. |
Top | Return to Approved Materials |