Approved Materials - Streetlighting

Return to Complete Preapproved Materials Page

Note: This document is provided as a benefit to contractors and suppliers who are bidding projects for the City of Overland Park. Only products identified on this list will be approved for installation on City construction projects. This list shall not be used as a substitute for catalog cuts or material approval. All material approvals shall be submitted on the approved City of Overland Park Contract Project Submittal form. The form is available at City Hall by contacting Bruce Wacker at (913) 895-6027. Failure to comply will be cause for rejection of materials until proper submittals are received. This list is updated periodically. The contractor or supplier shall contact the City of Overland Park to make sure that they have the most current list prior to bidding a project. Failure to do so shall not constitute a legitimate claim for change orders. Before accessing any links, the City recommends that the user delete browsing history to insure the latest catalog cut information is displayed correctly.

Contractor Submittal Form

Breakaway Pole Devices

Break-away Couplings and Bases


Notes	Manufacturer	Catalog Number	Approval Date	Photos
	Precision Form, Inc.	PFI-200-1A Breakaway Couplings	5/5/03	Coupling Nut Label
	Formerly Akron Foundries, Inc. / Hapco	AASHTO No. TB6-9”–10 ½” to 12½” Bolt Circle Dwg # A79402 – 4/4/98 AASHTO No. TB5-9”–14 ½” to 15¼” Bolt Circle Dwg # A79236 – 1/4/00	8/15/03	Label Top View Bottom View Side View Inside Cover Latch
	Formerly Akron Foundries, Inc. / Valmont	CS-300 – Up to 12” Bolt Circle AASHTO No. TB6-9 7" Diameter Shaft: Model No. 07R115125B9K w/ Rev 1 8" Diameter Shaft: Model No. 08R115125B9K w/ Rev 1 CS-370 – 14 ½” to 15” Bolt Circle AASHTO No. TB5-9 Model No. 10R145153B9K w/ Rev 1	4/23/18	Side View Top View Label


	Top	Return to Approved Materials

Cable

#6 AWG Equipment Ground Wire


Notes	Manufacturer	Catalog Number	Approval Date	Photos
	Advanced Digital Cable	BC06S	5/20/16	Bare Copper Cable
	Alan Wire	Bare No. 6 AWG	7/4/14
	Cerro Wire & Cable Co, Inc.	050-2200x or 050-2215x x = I for 315' Reel x = K for 1,000' Reel x = p for 5,000' Reel	5/5/03
	Encore Wire LTD	Bare No. 6 AWG	8/1/03
	Service Wire Co	BSOS6	5/7/02
	Southwire	Bare No. 6 AWG	5/5/03

	Comment:
		Soft Drawn Bare Solid Copper #6 AWG

Distribution Cable


Notes	Manufacturer	Catalog Number	Approval Date	Photos
	Advanced Digital Cable	304 UL file # E197262	5/20/16	Mfg Label AWG Label Cable
	Alan Wire	04USE11 – 500’ UL file #E322440	1/30/12	Cable
	Cerro Wire & Cable Co, Inc.	1201-4401x - Black x = K for 1,000' Reel x = P for 5,000' Reel UL file # E11098	5/5/03
Part of Prysmian Group	Draka Cableteq	388932	7/8/09	Cable Label View 1 Label View 2 Label View3
	Encore Wire LTD	UL file # E174428	8/1/03	E-File Number End View Label View 1 Label View 2
	Kris Tech Wire Co, Inc.	0407-RHW/USE-BK UL file # E207792	11/24/03	Cable Label View 1 Label View 2
	Service Wire Co	USE4BK UL file # E105667	5/7/02	Cable Label
	Southwire	11-32-72 UL file # E32071	5/5/03

	Comment:
		No. 4 AWG USE-2 Copper Black insulation Single cable, not three cables twisted on the reel


	Top	Return to Approved Materials

Pole Cable


Notes	Manufacturer	Catalog Number	Approval Date	Photos
	Advanced Digital Cable	410 - Black 410RD - Red 410GN - Green UL file # E208489	5/20/16	Black Cable Label Red Cable Green Cable
	Cerro Wire & Cable Co, Inc.	Black – 112-3801 Red – 112-3803 Green – 112-3805 UL file # E15119	5/5/03
	Encore Wire LTD	UL file # E123774	8/1/03	Black Cable Label 1 Black Cable Label 2 Red Cable Label 1
	Southwire	Red – 22-97-57 Black – 22-97-32 Green – 22-97-73 UL file # E23919	5/5/03

	Comment:
		Stranded copper THHN/THWN #10 AWG Color Coded Red and Black Green for ground cable


	Top	Return to Approved Materials

Electrical Service Cable


Notes	Manufacturer	Catalog Number	Approval Date	Photos
	Advanced Digital Cable	302 UL file # E197262	5/20/16	Mfg Label AWG Label Cable
	Alan Wire	Product Number 02USE11 – 500’ UL file #E322440	1/30/12
	Cerro Wire & Cable Co, Inc.	1201-4601 - Black 1201-4602 - White 1201-4605 - Green UL file # E11098	5/5/03
Part of Prysmian Group	Draka Cableteq	Product Number 389417	7/8/09
	Encore Wire LTD	UL file # E174428	8/1/03
	Kris Tech Wire Co, Inc.	0207-RHW/USE-BK UL file # E207792	11/24/03
	Service Wire Co	USE2BK UL file # E105667	5/7/02
	Southwire	113498 - Black 476523 - White 958009 - Green UL file # E32071	5/5/03

	Comment:
		No. 2 AWG USE-2 Copper Single cable, not three cables twisted on the reel


	Top	Return to Approved Materials

Conduit and Fittings

Schedule 40 PVC Conduit


Notes	Manufacturer	Catalog Number	Approval Date	Photos
	Cantex	1” – A52BA12 1 ½” – A52BE12 2” – A52CA12 3" – A52DA12 4" – A52EA12	5/5/03
	Heritage Plastics	1” – 8104 (10’ length) 1" – 8504 (20’ length) 1 ½” – 8106 (10’ length) 1 ½” – 8506 (20’ length) 2” – 8108 (10’ length) 2" – 8508 (20’ length) 3” – 8112 (10’ length) 3" – 8512 (20’ length) 4” – 8116 (10’ length) 4" – 8516 (20’ length)	1/23/19
	IPEX / Scepter	1” – 032410 (10’length) 1” – 032411 (20’ length) 1 ½” – 032415 (10' length) 1 ½” – 032416 (20' length) 2” – 032420 (10’length) 2" – 032421 (20’ length) 3” – 032430 (10’ length) 3" - 032431 (20’ length) 4” – 032440 (10’ length) 4" – 032441 (20’ length)	12/22/05
	Prime Conduit	1” – 49008-010 (10’ length) 1” – 49008-020 (20’ length) 1 1/2" – 49010-010 (10' length) 1 1/2" – 49010-020 (20' length) 2” – 49011-010 (10’ length) 2” – 40911-020 (20’ length) 3” – 49013-010 (10’ length) 3” – 49013-020 (20’ length) 4" – 49015-010 (10' length) 4" – 49015-020 (20' length)	5/26/09	Bell End End View Label
	Rocky Mountain Colby Pipe	1" – 504010010U (10' length) 1" – 504010020U (20' length) 1 1/2" – 504015010 (10' length) 1 1/2" – 504015020U (20' length) 2” – 504020010U (10’ length) 2" – 504020020U (20’ length) 3” – 504030010U (10’ length) 3" – 504030020U (20' length) 4” – 504040010U (10’ length) 4" – 504040020U (20’ length)	4/7/09	Bell End End View Label

	Comment:
		Schedule 40 PVC shall only be used in under ground applications

Schedule 80 PVC Conduit


Notes	Manufacturer	Catalog Number	Approval Date	Photos
	Cantex	1” – A53BA12 1 ½” – A53BE12 2” – A53CA12 3" – A53DA12 4" – A53EA12	1/23/19
	Heritage Plastics	1” – 9304 (10’ length) 1" – 9504 (20’ length) 1 ½” – 9306 (10’ length) 1 ½” – 9506 (20’ length) 2” – 9308 (10’ length) 2" – 9508 (20’ length) 3” – 9312 (10’ length) 3" – 9512 (20’ length) 4” – 9316 (10’ length) 4" – 9516(20’ length)	1/23/19
	IPEX / Scepter	1” – 032510 (10’length) 1” – 032511 (20’ length) 1 ½” – 032515 (10' length) 1 ½” – 032516 (20' length) 2” – 032520 (10’length) 2" – 032521 (20’ length) 3” – 032530 (10’ length) 3" - 032531 (20’ length) 4” – 032540 (10’ length) 4" – 032541 (20’ length)	1/23/19
	Prime Conduit	1” – 49408-010 (10’ length) 1” – 49408-020 (20’ length) 1 1/2" – 49410-010 (10' length) 1 1/2" – 49410-020 (20' length) 2” – 49411-010 (10’ length) 2” – 40911-020 (20’ length) 3” – 49413-010 (10’ length) 3” – 49413-020 (20’ length) 4" – 49415-010 (10' length) 4" – 49415-020 (20' length)	1/23/19
	Rocky Mountain Colby Pipe	1" – 508010010U (10' length) 1" – 508010020U (20' length) 1 1/2" – 508015010 (10' length) 1 1/2" – 508015020U (20' length) 2” – 508020010U (10’ length) 2" – 508020020U (20’ length) 3” – 508030010U (10’ length) 3" – 508030020U (20' length) 4” – 508040010U (10’ length) 4" – 508040020U (20’ length)	1/28/19

	Comment:
		Schedule 80 PVC shall only be used in above ground applications or exposed on the underside of bridge decks.

Schedule 40 PVC Fittings


Notes	Manufacturer	Catalog Number	Approval Date	Photos
	Allied Tube & Conduit	Standard Couplings: 1” – 59603 2” – 59606 3" – 59608 90º Elbows 36” Radius for Power: (Plain End / Bell End) 3” – 59732 / NA 90º Elbows: (Plain End / Belled End) 1” – 59590 / 802754 2” – 59593 / 802757 3” – 59595 / 802759 45º Elbows:(Plain End / Belled End) 1” – 59577 / 802768 2” – 59580 / 802771 3” – 59582 / 802773 30º Elbows: (Plain End / Belled End) 1” – 59563 / 802780 2” – 59566 / 802783 3" – 59568 / 802785	9/3/14
	Cantex	Standard Couplings: 1” – 6141625 2” – 6141628 3" – 6141630 90º Elbows 36” Radius for Power: (Plain End / Belled End) 3” – 5133820 / 5233930 90º Elbows: (Plain End / Belled End) 1” – 5133825 / 5233825 2” – 5133828 / 5233828 3” – 5133830 / 5233830 45º Elbows:(Plain End / Belled End) 1” – 5133765 / 5233765 2” – 5133768 / 5233768 3” – 5133770 / 5233770 30º Elbows: (Plain End / Belled End) 1” – 5133745 / 5233745 2” – 5133748 / 5233748 3" – 5133750 / 5233750 22.5º Elbows: (Plain End / Belled End) 1” – NA / 5236402 2” – 5134067 / 5234067 3" – 5134068 / 5234068	10/29/13
	Heritage Plastics	Standard Couplings: 1” – 610002 2” – 610005 3” – 610007 90º Elbows 36” Radius for Power: (Plain End) / (Belled End) 3” – 611392 / 611142 90º Elbows: (Plain End) / (Belled End) 1” – 611002 / 611058 2” – 611005 / 611061 3" - 611007 / 611063 45º Elbows: (Plain End) / (Belled End) 1” – 611016 / 611071 2” – 611019 / 611074 3” – 611021 / 611076 30º Elbows: (Plain End) / (Belled End) 1” – 611030 / 611085 2” – 611033 / 611088 3” – 611035 / 611090	7/24/12
	IPEX / Scepter	Standard Couplings: 1” – EC20 2” – EC35 3” – EC45 90º Elbows 36” Radius for Power: (Plain End / Belled End) 3” – 068767 / 068058 90º Elbows: (Plain End / Belled End) 1” – EE2090 / EE2090B 2” – EE3590 / EE3590B 3” – EE4590 / EE4590B 45º Elbows: (Plain End / Belled End) 1” – EE2045 / EE2045B 2” – EE3545 / EE3545B 3” – EE4545 / EE4545B 30º Elbows: (Plain End / Belled End) 1” – EE2030 / NA 2” – EE3530 / NA 3” – EE4530 / NA 22.5º Elbows: (Plain End / Belled End) 1” – NA / NA 2” – EE2022 / NA 3” – EE3022 / NA	12/22/05
	Prime Conduit	Standard Couplings: 1” – CP100 2” – CP200 3" – CP300 90º Elbows 36” Radius for Power: (Plain End / Belled End) 3” – UA9FL / UA9FLB 90º Elbows: (Plain End / Belled End) 1” – UA9AF / UA9AFB 2” – UA9AJ / UA9AJB 3” – UA9AL / UA9ALB 45º Elbows: (Plain End / Belled End) 1” – UA7AF / UA7AFB 2” – UA7AJ / UA7AJB 3” – UA7AL / UA7ALB 30º Elbows: (Plain End / Belled End) 1” – UA6AF / UA6AFB 2” – UA6AJ / UA6AJB 3” – UA6AL / UA6ALB	5/26/03

	Comment:
		To be used with Schedule 40 PVC conduit

Schedule 80 PVC Fittings


Notes	Manufacturer	Catalog Number	Approval Date	Photos
	Allied Tube & Conduit	Standard Couplings: 1” – 59603 2” – 59606 3" – 59608 90º Elbows 36” Radius for Power: (Plain End / Bell End) 3” – 597392 / 926013 90º Elbows: (Plain End / Belled End) 1” – 59014 / 924949 2” – 59017 / 924970 3” – 59019 / 924993 45º Elbows:(Plain End / Belled End) 1” – 59002 / NA 2” – 59005 / 924967 3” – 59007 / 924990 30º Elbows: (Plain End / Belled End) 1” – 59066 / NA 2” – 59069 / NA 3" – 59071 / NA	1/29/19
	Cantex	Standard Couplings: 1” – 6141625 2” – 6141628 3" – 6141630 90º Elbows 36” Radius for Power: (Plain End / Belled End) 3” – 5121081 / 5121038 90º Elbows: (Plain End / Belled End) 1” – 5121055 / NA 2” – 5121058 / 5221058 3” – 5121060 / 5221060 45º Elbows:(Plain End / Belled End) 1” – 5121055 / NA 2” – 5121008 / 5221008 3” – 5121010 / 5221010 30º Elbows: (Plain End / Belled End) 1” – 5121002 / NA 2” – 5121108 / NA 3" – 5121110 / NA 22.5º Elbows: (Plain End / Belled End) 1” – NA / NA 2” – 5136659 / 5221052 3" – 5136679 / 5236679	1/29/19
	Heritage Plastics	Standard Couplings: 1” – 59603 2” – 59606 3” – 59608 90º Elbows 36” Radius for Power: (Plain End) / (Belled End) 3” – 597392 / 926013 90º Elbows: (Plain End) / (Belled End) 1” – 59014 / 924949 2” – 59017 / 924970 3" - 59019 / 924993 45º Elbows: (Plain End) / (Belled End) 1” – 59002 / NA 2” – 59005 / 924967 3” – 59007 / 924990 30º Elbows: (Plain End) / (Belled End) 1” – 59066 / NA 2” – 59069 / NA 3” – 59071 / NA	1/29/19
	IPEX / Scepter	Standard Couplings: 1” – EC20 2” – EC35 3” – EC45 90º Elbows 36” Radius for Power: (Plain End / Belled End) 3” – 068777 / NA 90º Elbows: (Plain End / Belled End) 1” – 80EE2090 / NA 2” – 80EE3590 / NA 3” – 80EE4590 / NA 45º Elbows: (Plain End / Belled End) 1” – 80EE2045 / NA 2” – 80EE3545 / NA 5” – 80EE4545 / NA 30º Elbows: (Plain End / Belled End) 1” – 80EE2030 / NA 2” – 80EE3530 / NA 3” – 80EE4530 / NA	1/29/19
	Prime Conduit	Standard Couplings: 1” – CP100 2” – CP200 3" – CP300 90º Elbows 36” Radius for Power: (Plain End / Belled End) 3” – UB9FL / UB9FLB 90º Elbows: (Plain End / Belled End) 1” – UB9AF / UB9AFB 2” – UB9AJ / UB9AJB 3” – UB9AL / UB9ALB 45º Elbows: (Plain End / Belled End) 1” – UB7AF / UB7AFB 2” – UB7AJ / UB7AJB 3” – UB7AL / UB7ALB 30º Elbows: (Plain End / Belled End) 1” – UB6AF / UB6AFB 2” – UB6AJ / UB6AJB 3” – UB6AL / UB6ALB	1/29/19

	Comment:
		To be used with Schedule 80 PVC conduit


	Top	Return to Approved Materials

Bridge Expansion Couplings


Notes	Manufacturer	Catalog Number	Approval Date	Photos
	Allied Tube & Conduit	1" - 789648 1 ½” - 789650 2" - 789651 3" - 789653 4" - 789655	5/2/14
	Cantex	1” – 5144033 1 ½” – 5144035 2” – 5144036 3” – 5144038 4” – 5144040	5/5/03
	Heritage Plastics	1” – 610276 1 ½” – 610278 2” – 610279 3” – 610281 4” – 610283	9/26/13
	IPEX / Scepter	1” – EJ20 1 ½” – EJ30 2” – EJ35 3” – EJ45 4” – EJ55	9/26/13
	Prime Conduit	1” – EC2PC100 1 ½” – EC2PC150 2” – EC2PC200 3” – EC2PC300 4” – EC2PC400	9/26/13


	Top	Return to Approved Materials

HDPE Conduit


Notes	Manufacturer	Catalog Number	Approval Date	Photos
	Dura-Line	2” – 2SDR135GRY 3” – 3SDR135GRY	3/28/13

	Comment:
		SDR 13.5 all sizes Gray color Smooth outside wall UV Stabilized

HDPE Electrical Service Conduit


Notes	Manufacturer	Catalog Number	Approval Date	Photos
	Dura-Line	2” – 2SDR135BLK/RED 3” – 3SDR135BLK/RED	3/8/13

	Comment:
		SDR 13.5 Black with red stripes Smooth outside wall UV Stabilized


	Top	Return to Approved Materials

HDPE Couplings


Notes	Manufacturer	Catalog Number	Approval Date	Photos
	American Polywater	Bonduit Conduit Adhesive Use with standard Sch 40 PVC Couplings	10/11/10	Cartridge Equipment Nozzle
	Cabletec	HDPE to HDPE Coupling: AS 2.375 – 2” AS 3.500 – 3” HDPE to PVC Coupling: ASP 2.375 - 2" ASP 3.500 - 3"	8/2/01 12/22/17	HDPE to HDPE Couplings 2" & 3" Side View 2" Coupling 3" Coupling
	Dura-Line	HDPE to HDPE Coupling or HDPE to PVC Coupling: ShurLock Couplings 2" - 20000123 3" - 20000173	7/11/14	Side View Label View End View
	Georg Fischer/Central Plastics Company	HDPE to HDPE Electrofusion Couplings 2” IPS 5760030 3” IPS 10000360	5/5/06

Connector Kits, Fuse Holders and Fuses

Multi-tap Connectors


Notes	Manufacturer	Catalog Number	Approval Date	Photos
ABB Installation Products Inc. purchased Thomas & Betts	ABB Installation Products Inc.	RB 210-8 SL	6/12/17	Top View Side View Cable Input Set Screws


	Top	Return to Approved Materials

Un-Fused Fuse Holders


Notes	Manufacturer	Catalog Number	Approval Date	Photos
Ideal Industries purchased Buchanan	Ideal Industries / Buchanan	Style 20 U Breakaway	5/5/03	Fuse Holder Line Side Load Side

	Comment:
		Single pole in-line non-fused 600 volt, 30 amp Copper #10 AWG conductor size

Fused Fuse Holders


Notes	Manufacturer	Catalog Number	Approval Date	Photos
Ideal Industries purchased Buchanan	Ideal Industries / Buchanan	Style 65 U Breakaway	5/5/03	Fuse Holder Line Side Load Side

	Comment:
		Single pole in-line fused 600 volt, 8 amp Copper #10 AWG conductor size

Fuses


Notes	Manufacturer	Catalog Number	Approval Date	Photos
	Bussmann-by Eaton	Limitron Type KTK8	5/5/03	Fuse Label
	Ferraz Shawmut	ATM8	1/25/02
	Littelfuse	0KLK008	7/31/01

	Comment:
		600 volt, 8 amp


	Top	Return to Approved Materials

Splice Kits in Junction or Service Boxes


Notes	Manufacturer	Catalog Number	Approval Date	Photos
	Ilsco	Waterproof Submersible PED11-1/0SS-Z - Two Ports PED21-1/0SS-Z - Three Ports PED22-1/0SS-Z - Four Ports	11/23/16	2 Ports 3 Ports 4 Ports
	NSi Industries/Polaris	Waterproof Submersible ISPBS2/0 - Two Ports (Opposite) ISPB2/0-2 - Two Ports ISPB2/0-3 - Three Ports ISPB2/0-4 - Four Ports ISPB2/0-6 - Six Ports ISPB02/0 - Three Ports (2 and 1 Opposite)	9/2/16	Top View Label Iso view Cable Port
ABB Installation Products Inc. owns Thomas & Betts	ABB Installation Products Inc.	Waterproof Submersible RAB 1/0-2c - Two Ports RAB 1/0-3c - Three Ports RAB 1/0-4c - Four Ports RAB 1/0-21c - Three Ports (2 and 1 Opposite) RAB 1/0-32c - Five Ports (3 and 2 Opposite)	4/14/17	Iso View Plugs Ports Parallel Port Back View Opposite Port Back View

Control Centers

Control Centers (Four-Circuit)


Notes	Manufacturer	Catalog Number	Approval Date	Photos
	Milbank	CP3B91115PAOOP4	4/8/11	Front View Inside Front Breaker Panel Latch Back View Ringless Cover Meter Socket
	Myers Electric Products, Inc.	MEUG16AR-M100-OPK	7/24/12	Front View Inside Front Contactors Back View Ringless Cover Meter Socket
Purchased by Myers 12/10/12	Pacific Utility Products	USP16R-M2100-112C-AL-OPK	2/3/11	Front View Inside Front Breaker Panel Latch Contactors Back View Ringless Cover Meter Socket

	Comment:
		Ringless meter cover with horn bypass and exposed meter

Control Centers (Single-Circuit)


Notes	Manufacturer	Catalog Number	Approval Date	Photos
	Milbank	Pending approval
	Myers Electric Products, Inc.	MET2-VLM-LTS-R	7/24/12
Purchased by Myers 12/10/12	Pacific Utility Products	USP2R-100-112C-OPK-LT-PM	2/17/12	Front View Inside Front Panel Meter Socket Base Latch

	Comment:
		Ringless meter cover and horn bypass with mounting collar for stand alone unit.


	Top	Return to Approved Materials

Grounding Equipment

Ground Rod


Notes	Manufacturer	Catalog Number	Approval Date	Photos
	Erico Inc.	615800	2/27/02
	Galvan Industries	6260	12/20/13
	Hubbell	C615800	4/24/12
ABB Installation Products Inc. purchased Thomas & Betts	ABB Installation Products Inc.	6260	5/5/03

	Comment:
		5/8” x 10’-0” long Copper clad steel core UL listed

Ground Rod Clamp


Notes	Manufacturer	Catalog Number	Approval Date	Photos
	Burndy	GRC58 – 5/8”	2/27/02
	Erico Inc.	HDC58 – 5/8”	12/1/05
	Galvan Industries	SRC – 5/8”	12/20/13
ABB Installation Products Inc. purchased Thomas & Betts	ABB Installation Products Inc.	JAB58H – 5/8"	5/5/03

	Comment:
		Hex head set screw Copper alloy Long bearing surface UL listed


	Top	Return to Approved Materials

Junction and Service Boxes

Type 1 Junction Box


Notes	Manufacturer	Catalog Number	Approval Date	Photos
	Armorcast	A6001423 - Box only A6001422T - Cover only A6001423TA - Assembly	1/11/01
	Highline	Product Number Nomenclature PHB121212 – Box only CHC1212HL – Cover only PHA121212HL2 – Assembly	3/3/11	Side View Top View Bottom View
	Martin Enterprises	121212PCB – Box only 1212PCC – Cover only 121212PC – Assembly	10/17/11	Side View Top View Cover Bolt Hole
	New Basis	Cover Label PCB121212-00000 – Box only PCC121212P1-90006 – Cover only PCA121212-00150 – Assembly	2/26/02	Side View Top View Cover Bolt Hole
Carson Series H boxes were purchased by Oldcastle	Oldcastle	Part Numbers 12122001 – Box only 12124006 – Synertech Cover only 12121003 w/ 12124006 – Assembly 80002033 hex head bolts if separate	6/5/14	Cover
Quazite was purchased by Hubbell Power Systems	Quazite	PC1212BA12 – Box only PC1212HA0041 – Cover only PC1212Z50341 - Assembly Cover Codes	5/5/03

	Comment:
		Minimum Box Assembly Rating - Tier 15 (22,500 lbs test load) Logo to read “Street Lighting” 1 Piece cover to be ¾” thick Straight wall No mouseholes 3/8” – 16 NC hex head bolts and washers


	Top	Return to Approved Materials

Type 2 Junction Box


Notes	Manufacturer	Catalog Number	Approval Date	Photos
	Armorcast	A6001429TA - Assembly A6001428T - Cover only A6001429 - Box only	7/30/01	Side View Top View Bottom View
	Highline	Product Number Nomenclature PHB111812 – Box only CHC1118HL – Cover only PHA111812HL2 – Assembly	3/3/11	Side View Top View Cover Bottom View
	Martin Enterprises	111812PCB – Box only 1118PCC – Cover only 111812PC – Assembly	10/17/11
	New Basis	Cover Label PCB111812-00000 – Box only PCC111812P1-90020 – Cover only PCA111812-00150 – Assembly	2/26/02	Side View Top View Cover
Carson Series H boxes were purchased by Oldcastle	Oldcastle	Part Numbers 11182001 – Box only 11184609 – Cover only 11181611 – Assembly 80002033 hex head bolts if separate	8/29/13	Side View End View Cover
Quazite was purchased by Hubbell Power Systems	Quazite	PG1118BA12 – Box only PG1118HA0041 – Cover only PG1118Z50941 - Assembly Cover Codes	5/5/03

	Comment:
		Minimum Box Assembly Rating - Tier 15 (22,500 lbs test load) Logo to read “Street Lighting” 1 Piece cover to be 2” thick Straight wall No mouseholes 3/8” – 16 NC hex head bolts and washers


	Top	Return to Approved Materials

Lamps

High Pressure Sodium


Notes	Manufacturer	Catalog Number	Approval Date	Photos
	General Electric	Lucalox – HPS lamps 100 W – LU100/ECO/NC – 14673 150 W – LU150/55/ECO/NC – 40390 250 W – LU250/ECO/NC – 14674 400 W – LU400/ECO/NC – 14675	11/4/10
	Philips	100 W – C100S54/ALTO/NC – 14740-5 150 W – C150S55/ALTO/NC – 14741-3 250 W – C250S50/ALTO/NC – 14742-1 400 W – C400S51/ALTO/NC – 14743-9	10/14/11
	Sylvania	Lumalux PLUS/ECO – HPS lamps 100 W – LU100/PLUS/ECO – 67559 150 W – LU150/55/PLUS/ECO – 67494 250 W – LU250/PLUS/ECO – 67572 400 W – LU400/PLUS/ECO – 67312	3/26/08

	Comment:
		Clear lamp Mogul base ECO/ALTO = Low Mercury NC = Non Cycling 30,000+ Hour Average Life

LED Lamps


Notes	Manufacturer	Catalog Number	Approval Date	Photos
	Keystone	KT-LED36HID-EX39-830-D/G2	11/30/18	LED Closeup Side View Top View
	Philips	Product Number: 463364 Order Code: 40ED28/LED/730/ND 120-277V	12/5/16	Side View Top View Bottom View

	Comment:
		CCT = 3,000 K Mogul base Minimum Lumens = 5,000 100W HPS Replacement


	Top	Return to Approved Materials

Luminaires

HPS Cobra-Head Luminaire


Notes	Manufacturer	Catalog Number	Approval Date	Photos
Photometric Curves 150:AE7361-70fg3.ies 250 & 400: AEL12963.ies	American Electric Lighting – Acuity Brands	31515SCAMT2R3FGM2NRHPAR8663 – 150W HPS 32525SCAMT2R3FGNRHPAR8037 – 250W HPS 32540SCAMT2R3FGNRHPAR8037 – 400W HPS	4/28/05 4/15/05
Photometric Curves 150: GE7285.ies 250 & 400: GE1002.ies or GE7323.ies	General Electric	M2AC15S0A1GMC31347 – 150W HPS MDCA25S0A12FMC31 – 250W HPS MDCA40S0A12FMC31 – 400W HPS	5/5/03
Photometric Curves 150 & 250: HP03116.ies 400: HP03065.ies	Hubbell	RMCD15S38031125F0M53-150W RMCD25S38031125F0M53-250W RLCD40S38031125F0M53-400 W	5/5/03

	Comment:
		2-Bolt slip fitter connection for 150 W fixtures 4-Bolt slip fitter connection large housing for 250 W and 400 W fixtures Multi-Tap Ballast Plug-In “Protected” starter Aluminum wildlife guard NO PHOTOCELL

HPS Highway Luminaire


Notes	Manufacturer	Catalog Number	Approval Date	Photos
Photometric Curve 400W: 452580.ies	General Electric	RPFT40S0A1GLN4GR – 400W HPS	5/5/03


	Top	Return to Approved Materials

HPS Residential Post Top


Notes	Manufacturer	Catalog Number	Approval Date	Photos
Photometric Curves 100: 42737	Holophane	100W HPS Type 3: PTU-100HP-MT-B-P3-B-P Type 5: PTU-100HP-MT-B-P5-B-P 150W HPS Type 3: PTU-15AHP-MT-B-P3-B-P	2/14/03	Side View Ballast Door Internal Components Reflector Lamp Socket Cover Latch Cover Hinge
Photometric Curves mpb15s3a – Type 3 mpb15sa – Type 5	Sentry Lighting	100W HPS Type 3: SLH-100HPS-240-MT-III-PC-BK Type V: SLH-100HPS-240-MT-V-PC-BK 150W HPS Type 3: SLH-150HPS-240-MT-III-PC-BK	12/13/16	Side View Refractor Lens Internal View Hinge

	Comment:
		Multi-Tap Ballast Mogul base

LED Cobrahead Luminaire


Notes	Manufacturer	Catalog Number	Approval Date	Photos
	American Electric Lighting	Autobahn ATB2 Class A: Standard Gray Finish: ATB2-80BLEDE70-MVOLT-R2-IL-P7-SH-RFD210941-RFWD6463 Special Black Finish: ATB2-80BLEDE70-MVOLT-R2-BK-IL-P7-SH-RFD210942-RFWD6463 IES File: ATB2_80B_LED_E70_XXXXX_R2.ies Class B Standard Gray Finish: ATB2-60BLEDE70-MVOLT-R2-IL-P7-SH-RFD210943-RFWD6463 Special Black Finish: ATB2-60BLEDE70-MVOLT-R2-BK-IL-P7-SH-RFD210944-RFWD6463 IES File: ATB2_60B_LED_E70_XXXXX_R2.ies Class C: Standard Gray Finish: ATB2-40BLEDE70-MVOLT-R2-IL-P7-SH-RFD210946-RFWD6463 Special Black Finish: ATB2-40BLEDE70-MVOLT-R2-BK-IL-P7-SH-RFD210947-RFWD6463 IES File: ATB2_40B_LED_E70_XXXXX_R2.ies Autobahn ATB0 Class D: Standard Gray Finish: ATB0-30BLEDE70-MVOLT-R2-IL-P7-SH-RFD210948-RFWD6463 Special Black Finish: ATB0-30BLEDE70-MVOLT-R2-BK-IL-P7-SH-RFD210950-RFWD6463 IES File: ATB0_30B_LED_E70_XXXXX_R2.ies Class E: Standard Gray Finish: ATB0-20BLEDE70-MVOLT-R2-IL-P7-SH-RFD223679-RFWD6463 Special Black Finish: ATB0-20BLEDE70-MVOLT-R2-BK-IL-P7-SH-RFD223680-RFWD6463 IES File: ATB0_20B_LED_E70_XXXXX_R2.ies	4/4/13 4/4/14	Top View Bottom View Side View Back View Bird Guard Driver Compartment Wiring Compartment Wiring Terminal Level Bubble Housing Latch

	Comment:
		10 Year Warranty CCT = 4000K 7 Pin twistlock photocel receptacle with shorting cap Class A is a 400W HPS replacement Class B is a 310W HPS replacement Class C is a 250W HPS replacement Class D is a 150W HPS replacement Class E is a 100W HPS replacement Shall have label for class A, B, C, D or E on fixture housing For design purposes, correct photometric file is listed for each fixture. Download the file from the manufacturer's web page.

LED Residential Post Top Luminaire


Notes	Manufacturer	Catalog Number	Approval Date	Photos
	Sentry Lighting	Class E: Type 3: SLH-INC1-III-F-AC-BLACK	1/27/17	Side View Refractor Lens Hinge Socket Bracket

	Comment:
		No Ballast or Starter Mogul Lamp Socket Supply with LED Lamp

Photocell

System Photocell


Notes	Manufacturer	Catalog Number	Approval Date	Photos
	Dark To Light (DTL)	DP124-0.2-1826	3/27/13	Top View Side View

	Comment:
		120Volt Turn on at 0.2 Fc Silicon Chip 30 second delay


	Top	Return to Approved Materials

Poles

Aluminum Poles 30' Mounting Heights


Notes	Manufacturer	Catalog Number	Approval Date	Photos
	Hapco	27’-6” Poles: Type OP 301 - Dwg # B84165-001 w/Rev 3 – (1) 6' single member arm Type OP 301 - Dwg # B84165-002 w/Rev 3 - (1) 8' single member arm Type OP302 - Dwg # B79636-001 w/Rev 5 - (1) 12' truss type arm Type OP303 - Dwg # B84165-003 w/ Rev 3 – (2) 8' single member arms Identification Label: Dwg # B84166 9-3-03	4/02/14	Base ID Handhole Chain Handhole Cover Internal Rivnuts External Rivnuts Vibration Dampner
	Valmont	27’-6” Poles: Type OP301 - Model No. 270645706T4C w/Rev 1 – (1) 6' or 8' single member arm Type OP302 - Model No. 260860806T4A w/Rev 1 – (1) 12' truss type arm Type OP303 - Model No. 270645806T4A w/Rev 1 – (2) 8' single member arms Identification Label: Dwg # DSOP – ID Tag Detail 9-22-17	4/23/18	Base ID Handhole Chain Handhole Cover Internal Rivnuts External Rivnuts

	Comment:
		2013 AASHTO Design J-hook at top of pole Handhole cover keeper chain attached to bottom of handhole opening or Hinged handhole option Grounding screw shaft installed parallel to pole shaft at back side of pole. Labeled with manufacturer identification tag. 0.188” Wall Thickness Cable hook at top of pole


	Top	Return to Approved Materials

Aluminum Poles 40' Mounting Heights


Notes	Manufacturer	Catalog Number	Approval Date	Photos
	Hapco	37’-6” Poles: Type OP401 - Dwg # 84165-004 w/ Rev 4 - (1) 6' single member arm Type OP401 - Dwg # 84165-005 w/ Rev 4 – (1) 8' single member arm Type OP401 - Dwg # 84165-007 w/ Rev 4 - (2) 8' single member arms Type OP402 - Dwg # B79636-002 w/ Rev 5 – (1) 10' truss type arm Type OP402 - Dwg # B79636-003 w/ Rev 5 – (1) 12' truss type arm Type OP402 - Dwg # B79636-004 w/ Rev 5 – (1) 15’ truss type arm Type OP403 - Dwg # 80061-001 w/ Rev 4 - (1) 12’ & (1) 8’ truss type arms Type OP403 - Dwg # 80061-002 w/ Rev 4 - (2) 12’ truss type arms Type OP403 - Dwg # 80061-003 w/ Rev 4 - (2) 15’ truss type arms Type OP403 - Dwg # 80061-004 w/ Rev 4 - (2) 10' truss type arms Identification Label: Dwg # B84166 9-3-03	4/02/14	Base ID Handhole Chain Handhole Cover Internal Rivnuts External Rivnuts Vibration Dampner
	Valmont	37’-6” Poles: Type OP401 - Model No. 370645807T4B w/ Rev 1 – (1) 6' or 8' single member arm Type OP401 - Model No. 370645807T4B w/ Rev 1 - (2) 6' or 8' single member arms Type OP402 - Model No. 360860807T4E w/ Rev 1 – (1) 10', 12', or 15' single member arm Type OP403 - Model No. 368060107T4F w/ Rev 1 – (2) 8', 12' or 15' truss type arms Identification Label: Dwg # DSOP – ID Tag Detail 9-22-17	4/23/18	Base ID Handhole Chain Handhole Cover Internal Rivnuts External Rivnuts

	Comment:
		2013 AASHTO Design J-hook at top of pole Handhole cover keeper chain attached to bottom of handhole opening or Hinged handhole option Grounding screw shaft installed parallel to pole shaft at back side of pole. Labeled with manufacturer identification tag. 0.219” Wall Thickness


	Top	Return to Approved Materials

Aluminum Street Light Bracket Arms


Notes	Manufacturer	Catalog Number	Approval Date	Photos
	Hapco	Information is Contained on Pole Drawings.	4/02/14	Single Arm Truss Arm Attachments Truss Arm Weld Truss Arm
	Valmont	Arm Drawings: Model No. (1) or (2) MA0630B45B w/ Rev 1 – 6’ Single member Model No. (1) or (2) MA0830B45D w/ Rev 1 – 8’ Single member Model No. (1) or (2) TA0839B60K w/ Rev 1 – 8’ Truss type Model No. (1) or (2) TA1039B60K w/ Rev 1 – 10’ Truss type Model No. (1) or (2) TA1239B60K w/ Rev 1 – 12’ Truss type Model No. (1) or (2) TA1539B60K w/ Rev 1 – 15’ Truss type	4/23/18	Arm Attachment External Rivnut View Internal Rivnut View Single Arm

	Comment:
		Supply end cap on lower truss member. Labeled with identification tag.

Aluminum Poles 14' Mounting Heights


Notes	Manufacturer	Catalog Number	Approval Date	Photos
	Hapco	14’ Poles: Type OP14 - Dwg # A66338 w/Rev # 10 Identification Label: Dwg # B84166 9-3-03	4/02/14
	Valmont	14’ Poles: Type OP14 - Model No. 140030605T4A w/ Rev 1 Identification Label: Dwg # DSOP – ID Tag Detail 9-22-17	4/23/18	Handhole Cover Ground Lug

	Comment:
		2013 AASHTO Design Handhole cover keeper chain attached to bottom of handhole opening. Handhole should be smooth and free of burrs. Grounding screw shaft installed parallel to pole shaft at back side of pole. Labeled with manufacturer identification tag. 0.156” Wall Thickness

Screw-In Pole Foundations


Notes	Manufacturer	Catalog Number	Approval Date	Photos
Hubbell Power Systems is Parent	AB Chance	T112-0363 – R OP14 T112-0748 – T1 OP301/302/303 T112-02930101 – F1 OP401/402 T112-02940101 – F2 OP403	2/20/06	Base Iso Base Plate Helix Cable Entrance
	Dixie/MacLeanPower	D-1202-0029-A – R OP14 D-1202-0465-A – T1 OP301/302/303 D-1202-0031-A – F1 OP401/402 D-1202-0032-A – F2 OP403	4/10/13
	Earth Contact Products	Material Certifications LPS-66T-048-12 – R OP14 LPS-66T-060-122 – T1 OP301/302/303 LPS-86T-60A-14 – F1 OP401/402 LPS-86T-60B-14 – F2 OP403	10/15/12	Base Iso Base Plate Helix Cable Entrance
	JH Botts, Inc.	Dwg # JHBOPK-1 w/Rev A	8/20/03	Side View Conduit Entry Helix & Pilot Point Top Plate Base ID
	Pelco	SP-3017-KS-GLV – R OP14 SP-3008-KS-GLV – T1 OP301/302/303 SP-3013-KS-GLV – F1 OP401/402 SP-3012-KS-GLV – F2 OP403	7/19/06	Base Iso Base Plate Helix Cable Entrance

	Comment:
		Manufacturer and foundation identification stenciled on base plate with ¼” to ½” lettering.


	Top	Return to Approved Materials