Difference between revisions of "Approved Materials - Streetlighting"

Revision as of 12:05, 30 July 2015

Return to Complete Preapproved Materials Page

Note: This document is provided as a benefit to contractors and suppliers who are bidding projects for the City of Overland Park. Only products identified on this list will be approved for installation on City construction projects. This list shall not be used as a substitute for catalog cuts or material approval. All material approvals shall be submitted on the approved City of Overland Park Contract Project Submittal form. The form is available at City Hall by contacting Bruce Wacker at (913) 895-6027. Failure to comply will be cause for rejection of materials until proper submittals are received. This list is updated periodically. The contractor or supplier shall contact the City of Overland Park to make sure that they have the most current list prior to bidding a project. Failure to do so shall not constitute a legitimate claim for change orders. Before accessing any links, the City recommends that the user delete browsing history to insure the latest catalog cut information is displayed correctly.

Contractor Submittal Form

Breakaway Pole Devices

Break-away Couplings and Bases


Notes	Manufacturer	Catalog Number	Approval Date	Photos
	Precision Form, Inc.	PFI-200-1A Breakaway Couplings	5/5/03	Coupling Nut Label
	Akron Foundries, Inc. / Hapco	AASHTO No. TB6-9”–10 ½” to 12½” Bolt Circle Dwg # A79402 – 4/4/98 AASHTO No. TB5-9”–14 ½” to 15¼” Bolt Circle Dwg # A79236 – 1/4/00	8/15/03	Label Top View Bottom View Side View Inside Cover Latch
	Akron Foundries, Inc. / Valmont	CS-300 – Up to 12” Bolt Circle AASHTO No. TB6-9 Dwg # KS-90 – 5/14/03 w/ Rev 2 CS-370 – 14 ½” to 15” Bolt Circle AASHTO No. TB5-9 Dwg # KS-91 - 5/14/03 w/ Rev 3	6/20/03	Side View Top View Label


	Top	Return to Approved Materials

Cable

#6 AWG Equipment Ground Wire


Notes	Manufacturer	Catalog Number	Approval Date	Photos
	Alan Wire	Bare No. 6 AWG	7/4/14
	Cerro Wire & Cable Co, Inc.	050-2200x or 050-2215x x = I for 315' Reel x = K for 1,000' Reel x = p for 5,000' Reel	5/5/03
	Encore Wire LTD	Bare No. 6 AWG	8/1/03
	Service Wire Co	BSOS6	5/7/02
	Southwire	Bare No. 6 AWG	5/5/03

	Comment:
		Soft Drawn Bare Solid Copper #6 AWG

Distribution Cable


Notes	Manufacturer	Catalog Number	Approval Date	Photos
Member of The Marmon Group of Companies	Aetna Insulated Wire Co.	#4 AWG Copper	2/21/05	E-File Number End View Label View 1 Label View 2 Label View 3
	Alan Wire	04USE11 – 500’ UL file #E319493	1/30/12	Cable Label
	Cerro Wire & Cable Co, Inc.	1201-4401x - Black x = K for 1,000' Reel x = P for 5,000' Reel UL file # E11098	5/5/03
	Draka Cableteq	388932	7/8/09	Cable Label View 1 Label View 2 Label View3
	Encore Wire LTD	UL file # E174428	8/1/03	E-File Number End View Label View 1 Label View 2
	Kris Tech Wire Co, Inc.	0407-RHW/USE-BK UL file # E207249	11/24/03	Cable Label View 1 Label View 2
	Service Wire Co	USE4BK UL file # E105667	5/7/02	Cable Label
	Southwire	11-32-72 UL file # E32071	5/5/03

	Comment:
		No. 4 AWG USE Copper Black insulation Single cable, not three cables twisted on the reel


	Top	Return to Approved Materials

Pole Cable


Notes	Manufacturer	Catalog Number	Approval Date	Photos
	Cerro Wire & Cable Co, Inc.	Black – 112-3801 Red – 112-3803 Green – 112-3805 UL file # E15119	5/5/03
	Encore Wire LTD	UL file # E123774	8/1/03	Black Cable Label 1 Black Cable Label 2 Red Cable Label 1
Purchased by Southwire Co. 9/5/2001	Essex Electrical Products	Product Number 070101 UL file # E14656	2/1/01
	Southwire	Red – 22-97-57 Black – 22-97-32 Green – 22-97-xx UL file # E23919	5/5/03
	United Copper Industries	Black – 325370 (500’ reel) Red – 325372 (500’ reel) Green – 325379 (500’ reel) Black – 325573 (2,500’ reel) Red – 325574 (2,500’ reel) Green – 325580 (2,500’ reel) UL file # E194031-A	5/26/09	E-File Number End View Label View 1 Label View 2 Label View 3

	Comment:
		Stranded copper THHN/THWN #10 AWG Color Coded Red and Black Green for ground cable


	Top	Return to Approved Materials

Electrical Service Cable


Notes	Manufacturer	Catalog Number	Approval Date	Photos
Member of The Marmon Group of Companies	Aetna Insulated Wire Co.	UL file # E63541	2/21/05
	Alan Wire	Product Number 04USE11 – 500’ UL file #E319493	1/30/12
	Cerro Wire & Cable Co, Inc.	1201-4401x - Black x = K for 1,000' Reel x = P for 5,000' Reel UL file # E11098	5/5/03
	Draka Cableteq	Product Number 388932	7/8/09
	Encore Wire LTD	UL file # E174428	8/1/03
	Kris Tech Wire Co, Inc.	0407-RHW/USE-BK UL file # E207249	11/24/03	Cable Label View 1 Label View 2
	Senator / Southwire Co	11-32-72 UL file # E32071	5/5/03
	Service Wire Co	UL file # E105667	5/7/02

	Comment:
		No. 4 AWG USE Copper Black insulation Single cable, not three cables twisted on the reel


	Top	Return to Approved Materials

Conduit and Fittings

PVC Conduit


Notes	Manufacturer	Catalog Number	Approval Date	Photos
	Cantex	1” – A52BA12 1 ½” – A52BE12 2” – A52CA12 3" – A52DA12 4" – A52EA12	5/5/03
	Heritage Plastics	1” – 511010 (10’ length) 1" – 511020 (20’ length) 1 ½” – 511510 (10’ length) 1 ½” – 511520 (20’ length) 2” – 512010 (10’ length) 2" – 512020 (20’ length) 3” – 513010 (10’ length) 3" – 513020 (20’ length) 4” – 514010 (10’ length) 4" – 515020 (20’ length)	7/24/12
	IPEX / Scepter	1” – 032410 (10’length) 1” – 032411 (20’ length) 1 ½” – 032415 (10' length) 1 ½” – 032416 (20' length) 2” – 032420 (10’length) 2" – 032421 (20’ length) 3” – 032430 (10’ length) 3" - 032431 (20’ length) 4” – 032440 (10’ length) 4" – 032441 (20’ length)	12/22/05
	Prime Conduit	1” – 49008-010 (10’ length) 1” – 49008-020 (20’ length) 1 1/2" – 49010-010 (10' length) 1 1/2" – 49010-020 (20' length) 2” – 49011-010 (10’ length) 2” – 40911-020 (20’ length) 3” – 49013-010 (10’ length) 3” – 49013-020 (20’ length) 4" – 49015-010 (10' length) 4" – 49015-020 (20' length)	5/26/09	Bell End End View Label
	Rocky Mountain Colby Pipe	1" – 504010010U (10' length) 1" – 504010020U (20' length) 1 1/2" – 504015010 (10' length) 1 1/2" – 504015020U (20' length) 2” – 504020010U (10’ length) 2" – 504020020U (20’ length) 3” – 504030010U (10’ length) 3" – 504030020U (20' length) 4” – 504040010U (10’ length) 4" – 504040020U (20’ length)	4/7/09	Bell End End View Label

	Comment:
		Schedule 40 PVC


	Top	Return to Approved Materials

PVC Fittings


Notes	Manufacturer	Catalog Number	Approval Date	Photos
	Allied Tube & Conduit	Standard Couplings: 1” – 59603 2” – 59606 3" – 59608 90º Elbows 36” Radius for Power: (Plain End / Bell End) 3” – 59732 / NA 90º Elbows: (Plain End / Belled End) 1” – 59590 / 802754 2” – 59593 / 807757 3” – 59595 / 802759 45º Elbows:(Plain End / Belled End) 1” – 59577 / 802768 2” – 59580 / 802771 3” – 59582 / 802773 30º Elbows: (Plain End / Belled End) 1” – 59563 / 802780 2” – 59566 / 802783 3" – 59568 / 802785	9/3/14
	Cantex	Standard Couplings: 1” – 6141625 2” – 6141628 3" – 6141630 90º Elbows 36” Radius for Power: (Plain End / Belled End) 3” – 5133820 / 5233930 90º Elbows: (Plain End / Belled End) 1” – 5133825 / 5233825 2” – 5133828 / 5233828 3” – 5133830 / 5233830 45º Elbows:(Plain End / Belled End) 1” – 5133765 / 5233765 2” – 5133768 / 5233768 3” – 5133770 / 5233770 30º Elbows: (Plain End / Belled End) 1” – 5133745 / 5233745 2” – 5133748 / 5233748 3" – 5133750 / 5233750 22.5º Elbows: (Plain End / Belled End) 1” – NA / 5236402 2” – 5134067 / 5234067 3" – 5134068 / 5234068	10/29/13
	Heritage Plastics	Standard Couplings: 1” – 610002 2” – 610005 90º Elbows 36” Radius for Power: (Plain End / Belled End) 3” – 611392 / 611142 90º Elbows: (Plain End / Belled End) 1” – 611002 / 611058 2” – 611005 / 611061 45º Elbows: (Plain End / Belled End) 1” – 611016 / 611071 2” – 611019 / 611074 30º Elbows: (Plain End / Belled End) 1” – 611030 / 611085 2” – 611033 / 611088	7/24/12
	IPEX / Scepter	Standard Couplings: 1” – EC20 / 077003 2” – EC35 / 077006 90º Elbows 36” Radius for Power: (Plain End / Belled End) 3” – 068767 / 068058 90º Elbows: (Plain End / Belled End) 1” – EE2090 / EE2090B 2” – EE3590 / EE3590B 45º Elbows: (Plain End / Belled End) 1” – EE2045 / EE2045B 2” – EE3545 / EE3545B 30º Elbows: (Plain End / Belled End) 1” – EE2030 / NA 2” – EE3530 / NA 22.5º Elbows: (Plain End / Belled End) 1” – NA / NA 2” – EE2022 / NA	12/22/05
	Plastic Trends / Royal Pipe Systems	Standard Couplings: 1” – E010100 2” – E010200 90º Elbows 36” Radius for Power: (Plain End / Belled End) 3” – E07530036 / E07930036 90º Elbows: (Plain End / Belled End) 1” – E018100 / E021100 2” – E018200 / E021200 45º Elbows: (Plain End / Belled End) 1” – E019100 / E022100 2” – E019200 / E022200 30º Elbows: (Plain End / Belled End) 1” – E020100 / E072100 2” – E020200 / E072200	1/8/10
	Prime Conduit	Standard Couplings: 1” – CP100 2” – CP200 3" – CP300 90º Elbows 36” Radius for Power: (Plain End / Belled End) 3” – UA9FL / UA9FLB 90º Elbows: (Plain End / Belled End) 1” – UA9AF / UA9AFB 2” – UA9AJ / UA9AJB 3” – UA9AL / UA9ALB 45º Elbows: (Plain End / Belled End) 1” – UA7AF / UA7AFB 2” – UA7AJ / UA7AJB 3” – UA7AL / UA7ALB 30º Elbows: (Plain End / Belled End) 1” – UA6AF / UA6AFB 2” – UA6AJ / UA6AJB 3” – UA6AL / UA6ALB	5/26/03

	Comment:
		Schedule 40 PVC


	Top	Return to Approved Materials

Bridge Expansion Couplings


Notes	Manufacturer	Catalog Number	Approval Date	Photos
	Allied Tube & Conduit	1" - 789648 1 ½” - 789650 2" - 789651 3" - 789653 4" - 789655	5/2/14
	Cantex	1” – 5144033 1 ½” – 5144035 2” – 5144036 3” – 5144038 4” – 5144040	5/5/03
	IPEX / Scepter	1” – EJ20 1 ½” – EJ30 2” – EJ35 3” – EJ45 4” – EJ55	9/26/13
	Prime Conduit	1” – EC2PC100 1 ½” – EC2PC150 2” – EC2PC200 3” – EC2PC300 4” – EC2PC400	9/26/13


	Top	Return to Approved Materials

HDPE Conduit


Notes	Manufacturer	Catalog Number	Approval Date	Photos
Dura-Line now owns Arnco, Boreflex, Carlon and Lamson Pipe	Dura-Line	2” – 2SDR135GRY 3” – 3SDR135GRY	3/28/13

	Comment:
		SDR 13.5 all sizes Gray color Smooth outside wall UV Stabilized

HDPE Electrical Service Conduit


Notes	Manufacturer	Catalog Number	Approval Date	Photos
Dura-Line now owns Arnco, Boreflex, Carlon and Lamson Pipe	Dura-Line	2” – 2SDR135BLK/RED 3” – 3SDR135BLK/RED	3/8/13

	Comment:
		SDR 13.5 Black with red stripes Smooth outside wall UV Stabilized


	Top	Return to Approved Materials

HDPE Couplings


Notes	Manufacturer	Catalog Number	Approval Date	Photos
	American Polywater	Bonduit Conduit Adhesive Use with standard Sch 40 PVC Couplings	10/11/10	Cartridge Equipment Nozzle
	Cabletec	AS 2.375 – 2” AS 3.500 – 3”	8/2/01
	Central Plastics Company	Electrofusion Couplings 2” IPS 575-0042 3” IPS 575-0043	5/5/06
	Dura-Line	PushLock Couplings 2” - 20001847 ShurLock Couplings 2" - 20000123 3" - 20000173	7/10/14 7/11/14	Side View Components Side View Label View End View
Product is being Discontinued	Tyco Electronics / Jackmoon	Moon-Link Transparent Duct Coupling 2” – 20TC238SP 3” – 30TC350SP	12/23/02
	Unitex	Pro-Poly CA Adhesive Use only with Cantex Sch 40 PVC Longline Couplings: 2” – 6202000 3” – 6202005	1/9/06

Connector Kits, Fuse Holders and Fuses

Multi-tap Connectors


Notes	Manufacturer	Catalog Number	Approval Date	Photos	Comments
Operates under Burndy LLC, a Hubbell Company	Connector MFG.Co.	CMC SLK-112 I	1/11/01	Top View Iso View Components	6061-T6 aluminum Provide black plastisol boot cover
	Durham Company	KSL9211	8/22/13	Top View Side View Iso View
Formerly Fargo Mfg. Company, Inc	Hubbell Power Systems, Inc	Connector: GO32 Boot: GO32B	5/5/03	Components Top View Boot
	Polaris Electrical Connectors	SLCS4A-4P	9/21/07	Cable Ports Port Covers Set Screws Side View	Plastic coated Allen head screws No rubber boot


	Top	Return to Approved Materials

Un-Fused Fuse Holders


Notes	Manufacturer	Catalog Number	Approval Date	Photos
Ideal Industries purchased Buchanan	Ideal Industries / Buchanan	Style 20 U Breakaway	5/5/03	Fuse Holder Line Side Load Side

	Comment:
		Single pole in-line non-fused 600 volt, 30 amp Copper #10 AWG conductor size

Fused Fuse Holders


Notes	Manufacturer	Catalog Number	Approval Date	Photos
Ideal Industries purchased Buchanan	Ideal Industries / Buchanan	Style 65 U Breakaway	5/5/03	Fuse Holder Line Side Load Side

	Comment:
		Single pole in-line fused 600 volt, 8 amp Copper #10 AWG conductor size

Fuses


Notes	Manufacturer	Catalog Number	Approval Date	Photos
	Bussmann-by Eaton	Limitron Type KTK8	5/5/03	Fuse Label
	Ferraz Shawmut	ATM-8	1/25/02
	Littelfuse	KLK-8	7/31/01

	Comment:
		600 volt, 8 amp


	Top	Return to Approved Materials

Splice Kits


Notes	Manufacturer	Catalog Number	Approval Date	Photos	Comments
	Burndy	Split-Bolt Connectors KS15 - #10 STR to #8 STR KS20 - #8 STR to #4 STR KS22 - #6 STR to #3 STR KS23 - #6 STR to #2 STR KS25 - #4 STR to #1/0 STR Copper Compression Fittings Compression Tees: YST4C4C - #4 STR to #4 STR Compression Splices: YS4C - #4 STR to #4 STR	5/5/03 5/5/03	Split Bolt Compression Tee Compression Splice
	NSI Industries Polaris Blue	ITW-4 - #4 two port IPLW4-3 - #4 three port IPLW4-4 - #4 four port	9/11/07	Top View Bottom View Iso view	Waterproof/submersible

Control Centers

Control Centers (Four-Circuit)


Notes	Manufacturer	Catalog Number	Approval Date	Photos
	Milbank	CP3B91115PAOOP4	4/8/11	Front View Inside Front Breaker Panel Latch Back View Ringless Cover Meter Socket
	Myers Electric Products, Inc.	MEUG16AR-M100-OPK	7/24/12	Front View Inside Front Contactors Back View Ringless Cover Meter Socket
Purchased by Myers 12/10/12	Pacific Utility Products	USP16R-M2100-112C-AL-OPK	2/3/11	Front View Inside Front Breaker Panel Latch Contactors Back View Ringless Cover Meter Socket

	Comment:
		Ringless meter cover with horn bypass and exposed meter

Control Centers (Single-Circuit)


Notes	Manufacturer	Catalog Number	Approval Date	Photos
	Milbank	Pending approval
	Myers Electric Products, Inc.	MET2-VLM-LTS-R	7/24/12
Purchased by Myers 12/10/12	Pacific Utility Products	USP2R-100-112C-OPK-LT-PM	2/17/12	Front View Inside Front Panel Meter Socket Base Latch

	Comment:
		Ringless meter cover and horn bypass with mounting collar for stand alone unit.


	Top	Return to Approved Materials

Grounding Equipment

Ground Rod


Notes	Manufacturer	Catalog Number	Approval Date	Photos
	Chance/Hubbell	Cat No. C611300	4/24/12
	Erico Inc. / Eritech	Cat. No. 611300 – ½” x 10’ Cat. No. 613400 – ¾” x 10’	2/27/02
	ITTBlackburn	Cat. No. 5010	5/5/03
	Joslyn	Cat No. J-8330	5/5/03
	Knight	GRC 1210	5/5/03

	Comment:
		½” x 10’-0” long Copper clad steel core UL listed

Ground Rod Clamp


Notes	Manufacturer	Catalog Number	Approval Date	Photos
	Burndy	GRC 12 – ½” GRC34 – ¾”	2/27/02
	Erico Inc. / Eritech	Part No. HDC12 – ½” Part No. HDC34 – ¾”	12/1/05
	ITT Blackburn	Type JAB-12H	5/5/03

	Comment:
		Hex head set screw Copper alloy Long bearing surface UL listed


	Top	Return to Approved Materials

Junction and Service Boxes

Type 1 Junction Box


Notes	Manufacturer	Catalog Number	Approval Date	Photos
	Armorcast	A6001423 - Box only A6001422T - Cover only A6001423TA - Assembly	1/11/01
	Highline	Product Number Nomenclature PHB121212 – Box only CHC1212HL – Cover only PHA121212HL2 – Assembly	3/3/11	Side View Top View Bottom View
	Martin Enterprises	121212PCB – Box only 1212PCC – Cover only 121212PC – Assembly	10/17/11	Side View Top View Cover Bolt Hole
	New Basis	Cover Label PCB121212-00000 – Box only PCC121212P1-90006 – Cover only PCA121212-00150 – Assembly	2/26/02	Side View Top View Cover Bolt Hole
Carson Series H boxes were purchased by Oldcastle	Oldcastle	Part Numbers 12122001 – Box only 12124006 – Synertech Cover only 12121003 w/ 12124006 – Assembly 80002033 hex head bolts if separate	6/5/14	Cover
Quazite was purchased by Hubbell Power Systems	Quazite	PC1212BA12 – Box only PC1212HA0041 – Cover only	5/5/03

	Comment:
		Minimum Box Assembly Rating - Tier 15 (22,500 lbs test load) Logo to read “Street Lighting” 1 Piece cover to be ¾” thick Straight wall No mouseholes 3/8” – 16 NC hex head bolts and washers


	Top	Return to Approved Materials

Type 2 Junction Box


Notes	Manufacturer	Catalog Number	Approval Date	Photos
	Armorcast	A6001429TA - Assembly A6001428T - Cover only A6001429 - Box only	7/30/01	Side View Top View Bottom View
	Highline	Product Number Nomenclature PHB111812 – Box only CHC1118HL – Cover only PHA111812HL2 – Assembly	3/3/11	Side View Top View Cover Bottom View
	Martin Enterprises	111812PCB – Box only 1118PCC – Cover only 111812PC – Assembly	10/17/11
	New Basis	Cover Label PCB111812-00000 – Box only PCC111812P1-90020 – Cover only PCA111812-00150 – Assembly	2/26/02	Side View Top View Cover
Carson Series H boxes were purchased by Oldcastle	Oldcastle	Part Numbers 11182001 – Box only 11184609 – Cover only 11181611 – Assembly 80002033 hex head bolts if separate	8/29/13	Side View End View Cover
Quazite was purchased by Hubbell Power Systems	Quazite	PG1118BA12 – Box only PG1118HA0041 – Cover only	5/5/03

	Comment:
		Minimum Box Assembly Rating - Tier 15 (22,500 lbs test load) Logo to read “Street Lighting” 1 Piece cover to be 2” thick Straight wall No mouseholes 3/8” – 16 NC hex head bolts and washers


	Top	Return to Approved Materials

Lamps

High Pressure Sodium


Notes	Manufacturer	Catalog Number	Approval Date	Photos
	General Electric	Lucalox – HPS lamps 100 W – LU100/ECO/NC – 14673 150 W – LU150/55/ECO/NC – 40390 250 W – LU250/ECO/NC – 14674 400 W – LU400/ECO/NC – 14675	11/4/10
	Philips	100 W – C100S54/ALTO/NC – 14740-5 150 W – C150S55/ALTO/NC – 14741-3 250 W – C250S50/ALTO/NC – 14742-1 400 W – C400S51/ALTO/NC – 14743-9	10/14/11
	Sylvania	Lumalux PLUS/ECO – HPS lamps 100 W – LU100/PLUS/ECO – 67559 150 W – LU150/55/PLUS/ECO – 67494 250 W – LU250/PLUS/ECO – 67572 400 W – LU400/PLUS/ECO – 67312	3/26/08

	Comment:
		Clear lamp Mogul base ECO/ALTO = Low Mercury NC = Non Cycling 30,000+ Hour Average Life


	Top	Return to Approved Materials

Luminaires

HPS Cobra-Head Luminaire


Notes	Manufacturer	Catalog Number	Approval Date	Photos
Photometric Curves 150:AE7361-70fg3.ies 250 & 400: AEL12963.ies	American Electric Lighting – Acuity Brands	31515SCAMT2R3FGM2NRHPAR8663 – 150W HPS 32525SCAMT2R3FGNRHPAR8037 – 250W HPS 32540SCAMT2R3FGNRHPAR8037 – 400W HPS	4/28/05 4/15/05
Photometric Curves 150: GE7285.ies 250 & 400: GE1002.ies or GE7323.ies	General Electric	M2AC15S0A1GMC31347 – 150W HPS MDCA25S0A12FMC31 – 250W HPS MDCA40S0A12FMC31 – 400W HPS	5/5/03
Photometric Curves 150 & 250: HP03116.ies 400: HP03065.ies	Hubbell	RMCD15S38031125F0M53-150W RMCD25S38031125F0M53-250W RLCD40S38031125F0M53-400 W	5/5/03

	Comment:
		2-Bolt slip fitter connection for 150 W fixtures 4-Bolt slip fitter connection large housing for 250 W and 400 W fixtures Multi-Tap Ballast Plug-In “Protected” starter Aluminum wildlife guard NO PHOTOCELL

HPS Highway Luminaire


Notes	Manufacturer	Catalog Number	Approval Date	Photos
Photometric Curve 400W: 452580.ies	General Electric	RPFT40S0A1GLN4GR – 400W HPS	5/5/03


	Top	Return to Approved Materials

HPS Residential Post Top


Notes	Manufacturer	Catalog Number	Approval Date	Photos
Photometric Curves 100 & 150 W: 42737	Holophane	PTU-10DHP-MT-B-P3-B-P – 100 W PTU-15DHP-MT-B-P3-B-P – 150 W	2/14/03	Side View Ballast Door Internal Components Reflector Lamp Socket Cover Latch Cover Hinge
Photometric Curves mpb15s3a – Type 3 mpb15sa – Type 5	Sentry Lighting	SLH-100HPS-240MT-BLAF –Type 3 SLH-150HPS-240MT-BLAF –Type 3 SLH-100HPS-240MT-BLSF –Type 5	2/14/03	Side View Refractor Lens Internal View Hinge

	Comment:
		Multi-Tap Ballast

LED Cobrahead Luminaire


Notes	Manufacturer	Catalog Number	Approval Date	Photos
	American Electric Lighting	Autobahn ATB2 Class A: NA IES File: Class B Standard Gray Finish: ATB2-80BLEDE70-MVOLT-R2-IL-P7-SH-RFD182033 Special Black Finish: ATB2-80BLEDE70-MVOLT-R2-BK-IL-P7-SH-RFD191322 IES File: ATB2_80B_LED_E70_XXXXX_R2.ies Class C: Standard Gray Finish: ATB2-60BLEDE70-MVOLT-R2-IL-P7-SH-RFD182155 Special Black Finish: ATB2-60BLEDE70-MVOLT-R2-BK-IL-P7-SH-RFD191324 IES File: ATB2_60B_LED_E70_XXXXX_R2.ies Autobahn ATB0 Class D: Standard Gray Finish: ATB0-30BLEDE70-MVOLT-R2-IL-P7-SH-RFD182156 Special Black Finish: ATB0-30BLEDE70-MVOLT-R2-BK-IL-P7-SH-RFD191325 IES File: ATB0_30B_LED_E70_XXXXX_R2.ies	4/4/13 4/4/14	Top View Bottom View Side View Back View Bird Guard Driver Compartment Wiring Compartment Wiring Terminal Level Bubble Housing Latch
	Cooper Lighting	Navion Class A: Standard Gray Finish: PDR49422-NVN-AE-06-D-U-T2R-10K-700-4N7-AP-K-OA/RA1013 Special Black Finish: PDR49422-NVN-AE-06-D-U-T2R-10K-700-4N7-BK-K-OA/RA1013 IES File: NVN-AE-06-E-U-T2R-700.ies Class B: Standard Gray Finish: PDR49423-NVN-AE-04-D-U-T2R-10K-700-4N7-AP-K-OA/RA1013 Special Black Finish: PDR49423-NVN-AE-04-D-U-T2R-10K-700-4N7-BK-K-OA/RA1013 IES File: NVN-AE-04-E-U-T2R-700.ies Class C: Standard Gray Finish: PDR49424-NVN-AE-03-D-U-T2R-10K-700-4N7-AP-K-OA/RA1013 Special Black Finish: PDR49424-NVN-AE-03-D-U-T2R-10K-700-4N7-BK-K-OA/RA1013 IES File: NVN-AE-03-E-U-T2R-700.ies Class D: Standard Gray Finish: PDR49425-NVN-AE-02-D-U-T2R-10K-700-4N7-AP-K-OA/RA1013 Special Black Finish: PDR49425-NVN-AE-02-D-U-T2R-10K-700-4N7-BK-K-OA/RA1013 IES File: NVN-AE-02-E-U-T2R-700.ies	11/19/14	Top View Bottom View End View Back View Bird Guard Driver Compartment Wiring Compartment Wiring Terminal Slip Fitter Level Bubble Housing Latch Light Square

	Comment:
		10 Year Warranty CCT = 4000K 7 Pin twistlock photocel receptacle with shorting cap Class A is a 400W HPS replacement Class B is a 310W HPS replacement Class C is a 250W HPS replacement Class D is a 150W HPS replacement Shall have label for class A, B, C or D on fixture housing For design purposes, correct photometric file is listed for each fixture. Download the file from the manufacturer's web page.

LED Residential Post Top


Notes	Manufacturer	Catalog Number	Approval Date	Photos
Approved for Project Trial	Holophane	PTUE-70-4K-AS-A3-B-B-D-CBM IES File: PTUE 70 4k XX A3 X XXXX	7/30/15

	Comment:
		Class E Programmable, Dimmable Driver

Photocell

System Photocell


Notes	Manufacturer	Catalog Number	Approval Date	Photos
	Dark To Light (DTL)	DP124-0.2-1826	3/27/13	Top View Side View

	Comment:
		120Volt Turn on at 0.2 Fc Silicon Chip 30 second delay


	Top	Return to Approved Materials

Poles

Aluminum Poles 30' Mounting Heights


Notes	Manufacturer	Catalog Number	Approval Date	Photos
	Hapco	27’-6” Poles: Type OP 301 - Dwg # B84165-001 w/Rev 3 – (1) 6' single member arm Type OP 301 - Dwg # B84165-002 w/Rev 3 - (1) 8' single member arm Type OP302 - Dwg # B79636-001 w/Rev 5 - (1) 12' truss type arm Type OP303 - Dwg # B84165-003 w/ Rev 3 – (2) 8' single member arms Identification Label: Dwg # B84166	4/02/14	Base ID Handhole Chain Handhole Cover Internal Rivnuts External Rivnuts Vibration Dampner
	Valmont	27’-6” Poles: Type OP301 - Dwg # KS-71 w/Rev 5 – (1) 6' or 8' single member arm Type OP302 - Dwg # KS-72 w/Rev 5 – (1) 12' truss type arm Type OP303 - Dwg # KS-73 w/Rev 5 – (2) 8' single member arms Base and Handhole Drawings: Type OP301 - Dwg # KS-86 w/ Rev 5 - 7" Diameter Pole and 4" x 8" Handhole Type OP302 - Dwg #KS-87 w/ Rev 4 - 8" Diameter Pole and 4" x 8" Handhole Type OP303 - Dwg #KS-87 w/ Rev 4 - 8" Diameter Pole and 4" x 8" Handhole Identification Label: Dwg # KS-89A	4/04/14

	Comment:
		2013 AASHTO Design J-hook at top of pole Handhole cover keeper chain attached to bottom of handhole opening or Hinged handhole option Grounding screw shaft installed parallel to pole shaft at back side of pole. Labeled with manufacturer identification tag. 0.188” Wall Thickness Cable hook at top of pole


	Top	Return to Approved Materials

Aluminum Poles 40' Mounting Heights


Notes	Manufacturer	Catalog Number	Approval Date	Photos
	Hapco	37’-6” Poles: Type OP401 - Dwg # 84165-004 w/ Rev 4 - (1) 6' single member arm Type OP401 - Dwg # 84165-005 w/ Rev 4 – (1) 8' single member arm Type OP401 - Dwg # 84165-007 w/ Rev 4 - (2) 8' single member arms Type OP402 - Dwg # B79636-002 w/ Rev 5 – (1) 10' truss type arm Type OP402 - Dwg # B79636-003 w/ Rev 5 – (1) 12' truss type arm Type OP402 - Dwg # B79636-004 w/ Rev 5 – (1) 15’ truss type arm Type OP403 - Dwg # 80061-001 w/ Rev 4 - (1) 12’ & (1) 8’ truss type arms Type OP403 - Dwg # 80061-002 w/ Rev 4 - (2) 12’ truss type arms Type OP403 - Dwg # 80061-003 w/ Rev 4 - (2) 15’ truss type arms Type OP403 - Dwg # 80061-004 w/ Rev 4 - (2) 10' truss type arms Identification Label: Dwg # B84166	4/02/14	Base ID Handhole Chain Handhole Cover Internal Rivnuts External Rivnuts Vibration Dampner
	Valmont	37’-6” Poles: Type OP401 - Dwg # KS-74 w/ Rev 5 – (1) 6' or 8' single member arm Type OP401 - Dwg # KS-92 – (2) 8' single member arms Type OP402 - Dwg # KS-75 w/ Rev 6 – (1) 10', 12', or 15' single member arm Type OP403 - Dwg # KS-76 w/ Rev 6 – (2) 8', 12' or 15' truss type arms Handholes: Type OP401 - Dwg # KS-87 w/ Rev 4 – 8" Diameter Pole w/ 4" x 8" Handhole Type OP402 - Dwg # KS-87 w/ Rev 4 – 8" Diameter Pole w/ 4" x 8" Handhole Type OP403 - Dwg # KS-88 w/ Rev 3 – 10" Diameter Pole w/ 4" x 8" Handhole Identification Label: Dwg # KS-89 & KS-89A	4/04/14

	Comment:
		2013 AASHTO Design J-hook at top of pole Handhole cover keeper chain attached to bottom of handhole opening or Hinged handhole option Grounding screw shaft installed parallel to pole shaft at back side of pole. Labeled with manufacturer identification tag. 0.219” Wall Thickness


	Top	Return to Approved Materials

Aluminum Street Light Bracket Arms


Notes	Manufacturer	Catalog Number	Approval Date	Photos
	Hapco	Information is Contained on Pole Drawings.	4/02/14	Single Arm Truss Arm Attachments Truss Arm Weld Truss Arm
	Valmont	Arm Drawings:Dwg # KS-77 w/ Rev 1 – 6’ Single member Dwg # KS-78 w/ Rev 1 – 8’ Single member Dwg # KS-79 w/ Rev 2 – 8’ Truss type Dwg # KS-80 w/ Rev 1 – 10’ Truss type Dwg # KS-81 w/ Rev 1 – 12’ Truss type Dwg # KS-82 w/ Rev 3 – 15’ Truss type Arm Attachment Drawings: Dwg # KS-83-S w/ Rev 3 - (1) Single Member Arm Attachment Dwg # KS-83-T w/ Rev 3 - (2) Single Member Arm Attachments DWG # KS-84-S w/ Rev 4 - (1) Truss Type Arm Attachment Dwg # KS-84-T w/ Rev 4 - (2) Truss Type Arm Attachments	4/04/14

	Comment:
		Supply end cap on lower truss member. Labeled with identification tag.

Aluminum Poles 14' Mounting Heights


Notes	Manufacturer	Catalog Number	Approval Date	Photos
	Hapco	14’ Poles: Type OP14 - Dwg # A66338 w/Rev # 10 Identification Label: Dwg # B84166 9-3-03	4/02/14
	Valmont	14’ Poles: Type OP14 - Dwg # KS-70 w/ Rev 7 Base and Handhole Drawings: Type OP14 - Dwg # KS-85 w/ Rev 4 - 6" Dia Pole Base & 4" x 6" Handhole Identification Label: Dwg # KS-89A – ID Detail	4/04/14	Handhole Cover Ground Lug

	Comment:
		2013 AASHTO Design Handhole cover keeper chain attached to bottom of handhole opening. Handhole should be smooth and free of burrs. Grounding screw shaft installed parallel to pole shaft at back side of pole. Labeled with manufacturer identification tag. 0.156” Wall Thickness


	Top	Return to Approved Materials

Screw-In Pole Foundations


Notes	Manufacturer	Catalog Number	Approval Date	Photos
	AB Chance	T112-0363 – R OP14 T112-0748 – T1 OP301/302/303 T112-02930101 – F1 OP401/402 T112-02940101 – F2 OP403	2/20/06
	Dixie	D-1202-0029-A – R OP14 D-1202-0465-A – T1 OP301/302/303 D-1202-0031-A – F1 OP401/402 D-1202-0032-A – F2 OP403	4/10/13
	Earth Contact Products	LPS-66T-048-12 – R OP14 LPS-66T-060-12 – T1 OP301/302/303 LPS-86T-60A-14 – F1 OP401/402 LPS-86T-60B-14 – F2 OP403	10/15/12
	JH Botts, Inc.	Dwg # JHBOPK-1 w/Rev A	8/20/03	Side View Conduit Entry Helix & Pilot Point Top Plate Base ID
	Pelco	SK-1094-1 Rev C – R OP14 SK-1109-1 Rev B – T1 OP301/302/303 SK-1108-1 Rev B – F1 OP401/402 SK-1095-1 Rev E – F2 OP403	7/19/06

	Comment:
		Manufacturer and foundation identification stenciled on base plate with ¼” to ½” lettering.

@@ Line 1,027: / Line 1,027: @@
 |<font color = "red">Approved for Project Trial</font>
 |[http://www.acuitybrands.com/brands/lighting/holophane Holophane]
-|[[media:TRF PQL SL CAT Holophane LEDPostTop.pdf|PTUE-70-4K-AS-A3-B-B-D-CBM]]<br>[http://www.holophane.com/Search/advsrch.asp?q=ptue PTUE 70 4k XX A3 X XXXX]<i>IES File:</i>
+|[[media:TRF PQL SL CAT Holophane LEDPostTop.pdf|PTUE-70-4K-AS-A3-B-B-D-CBM]]<br>[http://www.holophane.com/Search/advsrch.asp?q=ptue <i>IES File: PTUE 70 4k XX A3 X XXXX]</i>
 |[[media:TRF PQL SL MEM Holophane LEDPostTop.pdf|7/30/15]]
 |