Approved Materials - Signing

From PPM Wiki - City of Overland Park Projects and Procedures Manual Pages
Revision as of 15:15, 18 February 2021 by Brian Geiger (talk | contribs) (→‎Illuminated Street Name Signs: Clarified Tri-Study punch pattern)
Jump to navigation Jump to search
Return to Approved Materials
Side arrow 80x66.png

Contractor Submittal Forms

GeekNotesIcon.png Note: This document is provided as a benefit to contractors and suppliers who are bidding projects for the City of Overland Park. Only products identified on this list will be approved for installation on City construction projects. This list shall not be used as a substitute for catalog cuts or material approval. All material approvals shall be submitted on the approved City of Overland Park Contract Project Submittal form. The form is available at City Hall by contacting Bruce Wacker at (913) 895-6027. Failure to comply will be cause for rejection of materials until proper submittals are received. This list is updated periodically. The contractor or supplier shall contact the City of Overland Park to make sure that they have the most current list prior to bidding a project. Failure to do so shall not constitute a legitimate claim for change orders. Before accessing any links, the City recommends that the user delete browsing history to insure the latest catalog cut information is displayed correctly.


Aluminum Sign Blanks

Standard Signs

Notes Manufacturer Catalog Number Approval Date Photos
Hall Sign
Lyle Sign, Inc.
National Sign
Newman
The Work Zone, Inc.
Vulcan Sign
Comment:
0.080” Thick
5052H38 or 6061-T6 aluminum alloy

Overhead Street Name Signs

Notes Manufacturer Catalog Number Approval Date Photos
Hall Sign
Lyle Sign, Inc.
National Sign
Newman
The Work Zone, Inc.
Vulcan Sign
Comment:
0.125” Thick
5052H38 or 6061-T6 aluminum alloy

Up arrow 66x80.png Top Return to Approved Materials
Side arrow 80x66.png

Blank-Out Signs

Notes Manufacturer Catalog Number Approval Date Photos
Nova Tech LLC is the
sales representative
M-Systems, Inc. Spec Sheet
R10-11
R10-11b
1/12/09 Sign Face
Signal-Tech R10-11: 54812 7/30/20 Dual Drivers
Door Gasket
Door Hasp
Inside Back of Sign
Label
Sample Face
Comment:
R10-11: 24” x 30” or 36" x 48" (See MUTCD), No Turn on Red "Ball" - White text with “Red Ball” symbol
R10-11b: 36" x 36", No Turn on Red - White text
Front Lens: Complete blank out when "Off"
Single row LED

Cable for Illuminated Street Name Signs & Blank-out Signs

Sign Power Cable

Notes Manufacturer Catalog Number Approval Date Photos
Advanced Digital Cable 8103 10/23/08
Falcon Fine Wire 980314X19-1 11/6/08 Jacket Label
Comment:
1-3c#14 AWG
Stranded Copper IMSA 19-1

Up arrow 66x80.png Top Return to Approved Materials
Side arrow 80x66.png

Driver Feedback Signs

Notes Manufacturer Catalog Number Approval Date Photos
TrafficCalm Systems M75-012SE-000x
x = Sign Face Color
1 = White
2 = Fluorescent Yellow-Green
3 = Fluorescent Orange
4 = Yellow
6/21/18
Comment:
Location as determined by the City of Overland Park
White Sign, Solar Power, 20W Panel
Universal Mounting Bracket & Pole Mount Plate

Illuminated Street Name Signs

Notes Manufacturer Catalog Number Approval Date Photos
Southern Manufacturing/
Accord Industries
LEXZZSBANNAAD1: Standard Number Format
LE619SBANNAAD1: 6’ x 19”
LE819SBANNAAD1: 8’ x 19”
LE624SBANNAAD1: 6’x 24”
LE824SBANNAAD1: 8’ x 24”
10/29/08 Front View
Back View
End View
LED Driver
LED Light Bar
Hasp
Hinge
Terminal Block
Fuse
Sheeting
Comment:
Legend:
LE = Standard LED Sign
X = Sign Width (4, 5, 6, 7, 8, 9, or 10 ft)
ZZ = Sign Height (19 or 24 inches)
S = Single Sided Sign
B = Rigid Mount Top and Bottom
A = Tri-stud Punch Pattern
N = Mounting Brackets are Not Included with Sign
N = No Photocell
AA = Monarch Black
D = Diamond Grade Translucent ASTM Type XI Retroreflective Sheeting
1 = Green EC Film Background
Font: Emod 2000 8"UC/6"LC

Up arrow 66x80.png Top Return to Approved Materials
Side arrow 80x66.png

Mounting Brackets

Illuminated Street Name Sign Brackets

Notes Manufacturer Catalog Number Approval Date Photos
For Use with
Southern Manufacturing Signs
Pelco Products AG-0125-1-LL-SS-PXX 8/7/19
For Use with
Southern Manufacturing Signs
Sky Bracket SS-SBLL-TS-37
Upper Bracket Arm
Lower Bracket Arm
1/16/19
Four Use with
Temple Edge-Lit Signs
Sky Bracket SBLL-ISM 11/25/19
Comment:
Stainless steel banding/cable and hardware
For Pelco:
Required cable length (LL) to be determined by contractor based on manufacturer's recommendations as follows:
62" – for mast arm diameters ranging from 2” to 7”
84" – for mast arm diameters ranging from 7.1” to 10.5”
96" – for mast arm diameters ranging from 10.6” to 12.4”
110" – for mast arm diameters ranging from 12.5” to 14.6”
120" – for mast arm diameters ranging from 14.7” to 16.2”
132" – for mast arm diameters ranging from 16.3” to 18.2”
Color (XX) shall be as follows:
NC - No Color
33 - Glossy Black
71 - RAL6012 Green
39 - RAL8019 Dark Bronze
For Sky Bracket:
Required banding length (LL) to be determined by contractor based on manufacturer's recommendation as follows:
29” – for mast arm diameters ranging from 2” to 7”
42” – for mast arm diameters ranging from 8” to 11”
59” – for mast arm diameters ranging from 12” to 17”
If other than standard color, specify SB-BLK for Black Powder Coat or SP-SPL for Special Color Powder Coat

Overhead Street Name Sign Mast Arm Brackets

Notes Manufacturer Catalog Number Approval Date Photos
Pelco Inc. AG-0144-CTC-LL-SS-PXX 8/6/19 Open Hinge View
Top View
Side View
Sky Bracket SS-SBLL-SBK-XXTK-YY
Standard Bracket
Tube Kit
14" Sign Kit
23" Sign Kit
Bracket Schematic
1/16/19 Showing previously approved cable mounting system.
Bracket Front View
Bracket Back View
Sign Support Channel
Comment:
Stainless steel banding/cable and hardware
For Pelco:
Center to Center Distance (CTC): See Table on catalog cut based on sign size
Required Cable Length (LL) to be determined by contractor based on manufacturer's recommendations as follows:
62" – for mast arm diameters ranging from 2” to 7”
84" – for mast arm diameters ranging from 7.1” to 10.5”
96" – for mast arm diameters ranging from 10.6” to 12.4”
110" – for mast arm diameters ranging from 12.5” to 14.6”
120" – for mast arm diameters ranging from 14.7” to 16.2”
132" – for mast arm diameters ranging from 16.3” to 18.2”
Color (XX) shall be as follows:
NC - No Color
33 - Glossy Black
71 - RAL6012 Green
39 - RAL8019 Dark Bronze

For Sky Bracket:
Required banding length (LL) to be determined by contractor based on manufacturer's recommendation as follows:
29” – for mast arm diameters ranging from 2” to 7”
42” – for mast arm diameters ranging from 8” to 11”
59” – for mast arm diameters ranging from 12” to 17”
Tube Length (XX) varies. Use the longest that will fit the sign and cut off excess (18", 24", 46", 60", 74" or 96")
For signs longer than 102", use two mounting bracket kits with shorter tubes.
Channel Length (YY) and number varies. Use longest channel that will not exceed sign size (8", 14", or 23")
2 channels for 18" to 46" tubes
3 channels for 60" to 74" tubes
4 channels for 96" tubes
Don't exceed sign area of 2,000 square inches per clamp kit
If other than standard color, specify SB-BLK for Black Powder Coat or SP-SPL for Special Color Powder Coat

Round Pole Mounting Bracket

Notes Manufacturer Catalog Number Approval Date Photos
Band-It Flared Leg Bracket, Stainless Steel Bolt, Washer and Fiber Washer: D02199 8/3/07 Top View
Side View
It Straps On, Inc. Flared Leg Bracket w/ SS Bolt & SS Washer: SB021
Provide plastic washer separately
8/3/07
ITW Strapbinder Flared Leg Bracket w/ SS Bolt and Plastic Washer: ST021
Provide stainless steel washer separately
8/3/07
MD Solutions Flared Leg Bracket, Stainless Steel Bolt, Washer and Plastic Washer: PLUS+4SS 11/9/17 Flared Leg Bracket
Parts
PermaBand Flared Leg Bracket w/ SS Bolt & SS Washer: PMB02150
Plastic Washer: PMP00350
5/1/17 Flared Leg Bracket
Top View
Side View
Bolt
Plastic Washer
TAPCO, Inc. Bracket: 035-00008
SS Bolt: 035-00010
Nylon Washer: 052-00295
Provide stainless steel washer separately
8/3/07
Xcessories Squared Flared Leg Bracket w/ SS Bolt and Plastic Washer: XST021
Provide stainless steel washer separately
4/13/16
Comment:
One Stainless Steel 5/16"-18 x 3/4" Bolt
Flared Leg
Stainless steel and plastic washers shall be provided separately if not listed

Up arrow 66x80.png Top Return to Approved Materials
Side arrow 80x66.png

Sign Brackets for Parking Lot Sign Bollard

Notes Manufacturer Catalog Number Approval Date Photos
SafetySign Y4946F-R-STR-BRKT 2/2/21
Xcessories Squared XAPC238RD 2/2/21

Traffic Sign Mast Arm Brackets

Notes Manufacturer Catalog Number Approval Date Photos
Pelco AG-0142-CTC-LL_SS_PXX 4/19/19 Open Hinge View
Top View
Side View
Sky Bracket SS-SBLL-SBK-XXTK-YY
Standard Bracket
Tube Kit
8" Sign Kit
14" Sign Kit
23" Sign Kit
Bracket Schematic
1/16/19 Shown with previously approved cable mounting system.
Front View
Back View
Side View
Sign Channel
Comment:
Stainless steel banding/cable and hardware
For Pelco:
Tube Length Center to Center (CTC) varies. See the cut sheet to determine size based on the length of sign.
Required cable length (LL) to be determined by contractor based on manufacturer's recommendation as follows:
62" – for mast arm diameters ranging from 2” to 7”
84" – for mast arm diameters ranging from 7.1” to 10.5”
96" – for mast arm diameters ranging from 10.6” to 12.4”
110" – for mast arm diameters ranging from 12.5” to 14.6”
120" – for mast arm diameters ranging from 14.7” to 16.2”
132" – for mast arm diameters ranging from 16.3” to 18.2”
Color (XX) shall be as follows:
NC - No Color
33 - Glossy Black
71 - RAL6012 Green
39 - RAL8019 Dark Bronze

For Sky Bracket:
Required banding length (LL) to be determined by contractor based on manufacturer's recommendation as follows:
29” – for mast arm diameters ranging from 2” to 7”
42” – for mast arm diameters ranging from 8” to 11”
59” – for mast arm diameters ranging from 12” to 17”
Tube Length (XX) varies. Use the longest that will fit the sign and cut off excess (18", 24", 46", 60", 74" or 96")
Channel Length (YY) and number varies. Use longest channel that will not exceed sign size (8", 14", or 23")
2 channels for 18" to 46" tubes
3 channels for 60" to 74" tubes
4 channels for 96" tubes
For signs longer than 102", use two mounting bracket kits with shorter tubes.
Don't exceed sign area of 2,000 square inches per clamp kit.
If other than standard color, specify SB-BLK for Black Powder Coat or SP-SPL for Special Color Powder Coat

Wing Mounting Brackets

Notes Manufacturer Catalog Number Approval Date Photos
Xcessories Squared Bracket: CSB450RDL-ZP
T-Channel: XAT175-12
1/7/21 Bracket
Bracket & Channel
Channel
Assembly
Comment:
T-Channel comes in 12' extrusions for cutting to desired length

Sign Banding

Notes Manufacturer Catalog Number Approval Date Photos
Band-It C20699 8/3/07 Label Name
Label Grade
It Straps On, Inc. BA206 8/3/07
ITW Strapbinder ST206 8/3/07
MD Solutions 3430-SS 11/9/17 Banding
Panduit MSW75T30-CR2 11/5/12
PermaBand PMB206 5/1/17 Banding
Band and Buckle
TAPCO Inc. 497-00001 8/3/07
Xcessories Squared SSB75-30 4/13/16
Comment:
Grade 201 Stainless Steel
0.030” Thick
¾” Wide

Banding Buckle

Notes Manufacturer Catalog Number Approval Date Photos
Band-It C25699 8/3/07 Top View
Buckle w/ Strap
It Straps On, Inc. BU256 8/3/07
ITW Strapbinder ST256 8/3/07
MD Solutions BK34-SS 11/9/17 Buckle
Panduit MSBW75-C2 11/5/12
PermaBand PMB256 5/1/17 Buckle
Side View
Banding and Buckle
TAPCO, Inc. 497-00002 8/3/07
Xcessories Squared XST256 4/13/16
Comment:
Grade 201 Stainless Steel Buckle
For 0.030” Thick x ¾” Wide Banding

Round to Square Coupler

Notes Manufacturer Catalog Number Approval Date Photos
Xcessories Squared RSC175-ZP 9/24/2020
Comment:
For use with 1.75" Square Posts

Parking Lot Sign Bollard

Notes Manufacturer Catalog Number Approval Date Photos
Impact Recovery Systems No Sign: SS4Y-42-SP-105-OP- SS 5/10/17 Adapter & Post
Elastomer
Base
Assembly
Comment:
Sign post length shall be 102" in length for a maximum height to top of post of 105"
Hardware shall be stainless steel

Posts and Anchors

1 ¾” x 1 ¾” Posts

Notes Manufacturer Catalog Number Approval Date Photos
Allied Tube & Conduit
A Division of Atcore International
Telespar Square Tubular Sign Supports
16F12PXXPG
8/31/12
Trinity SQR-LOC Perforated Traffic Sign Post Square Tubular Sign Supports
SQXX-12
9/24/2020
Comment:
12 Gauge
Pre-punched holes on all sides
Galvanized
XX = Length (even 2’ increments up to 24’)

2” x 2” Anchor

Notes Manufacturer Catalog Number Approval Date Photos
Allied Tube & Conduit
A Division of Atcore International
Telespar Square Tubular Sign Supports
4' Anchor - 20F12A04PG
11/9/12
Must be cut in half to get a 4' length. Trinity SQR-LOC Perforated Traffic Sign Post Square Tubular Sign Supports
SQ82-12
9/24/2020
Comment:
12 Gauge
Pre-punched holes on all sides
Galvanized
48" in length

2 ¼” x 2 ¼” Sleeves

Notes Manufacturer Catalog Number Approval Date Photos
Allied Tube & Conduit
A Division of Atcore International
Telespar Square Tubular Sign Supports
22F12A02.5PG
8/31/12
Trinity SQR-LOC Perforated Traffic Sign Post Square Tubular Sign Supports
SQ302
9/24/2020
Comment:
12 Gauge
Pre-punched holes on all sides
Galvanized
30” length

Concrete Surface Mount Sign Post Anchor

Notes Manufacturer Catalog Number Approval Date Photos
Xcessories Squared Kleen Break Model 425 Sign Post Coupler
XKBSM42520-G
4/13/16 Top Half Coupling
Surface Mount Anchor
Surface Mount Iso View
Locking Wedge
Shear Bolt
Comment:
Concrete Surface Mount to be used only when installing signs on concrete medians, bridge decks, or sidewalks

Paver Median or Island Sign Post Anchor

Notes Manufacturer Catalog Number Approval Date Photos
Xcessories Squared Kleen Break Model 425 Sign Post Coupler
XKB42520-G
AXT225-36-G Anchor Extension
4/13/16 Top Half Coupling
Paver Mount Anchor
Paver Mount Iso View
Locking Wedge
Shear Bolt
Comment:
Paver Median or Island Mount to be used only when installing signs in medians or islands that have paver bricks

Up arrow 66x80.png Top Return to Approved Materials
Side arrow 80x66.png

Rectangular Rapid Flashing Beacon (RRFB)

RRFB For Use with Standard Push Button

Solar Engine

Notes Manufacturer Catalog Number Approval Date Photos
Carmanah Technologies Corp R920 Series 12/17/13 Front View
Back View
Side View
TraffiCalm Systems Controller: M75-SA300-CTLX
Collaborator: M75-SA300-CLBX
1/9/19 Solar Panel Front View
Solar Panel Back View
Comment:
Use only with standard, non-audible push buttons
Mount on standard perforated square sign posts
Color: Natural Aluminum

Mounting Bracket

Notes Manufacturer Catalog Number Approval Date Photos
Carmanah Technologies Corp 68362 - 2" square post mount
69107 - Side of Post Mount (Black)
12/17/13
TraffiCalm Systems Mounting Bracket is Included with Controller 1/9/19
Comment:
Mounting bracket varies based on type of installation
Side of post mount is not available in Natural

Light Bar

Notes Manufacturer Catalog Number Approval Date Photos
Carmanah Technologies Corp 68352 12/17/13 Front View
Back View
End View
LED's
TraffiCalm Systems M75-SA328-0000 1/9/19 Front View
Back View
End View
LED's
Comment:
Light bar with confirmation lights

Pedestrian Pushbutton

Notes Manufacturer Catalog Number Approval Date Photos
Campbell Co 4EVR 120 – X – No LED w/ Button Cup 4/5/12
Polara Engineering, Inc. Bulldog Series
Push Button Assembly – BDSP-010-X

Pole Mount Adaptor – BDPM-X
2/10/12
Comment:
Sound on actuation
NO LED Flash
X= B for Black or Y for Yellow

Sign Posts, Anchors and Sleeves

Notes Manufacturer Catalog Number Approval Date Photos
Unistrut Distribution Co./
Allied Mechanical
Tube Division
Telespar Square Tubular Sign Supports
2" x 2" Post - 20F12P14PG
2-1/4" x 2-1/4" Anchor - 22F12A04PG
2-1/2" x 2-1/2" Anchor Sleeve - 24F12APG
12/16/13
Comment:
12 Guage
Pre-punched holes on all sides
Galvanized
14' length for 2" x 2" post
48" length for 2-1/4" x 2-1/4" Anchor
18" length for 2-1/2" x 2-1/2" Anchor Sleeve
See "Aluminum Sign Blanks" and "Sign Sheeting" for approved materials for the R10-25, S1-1 and W16-7p signs

Up arrow 66x80.png Top Return to Approved Materials
Side arrow 80x66.png

RRFB For Use with Audible Push Button

Solar Engine

Notes Manufacturer Catalog Number Approval Date Photos
Carmanah Technologies Corp Model SC315 GenIII 7/13/15
Comment:
Use only with audible push buttons
Mount on standard pedestrian signal post
Color: Natural Aluminum

Mounting Bracket

Notes Manufacturer Catalog Number Approval Date Photos
Carmanah Technologies Corp 71859 - 4" to 4-1/2" Diameter Post Mount
71858 - Side of Pole Mount
7/13/15
Comment:
Mounting bracket varies based on type of installation

Light Bar

Notes Manufacturer Catalog Number Approval Date Photos
Carmanah Technologies Corp 68352 7/13/15 Front View
Back View
End View
LED's
Comment:
Light bar with confirmation lights

Pedestrian Pushbuttons ADA Audible

Notes Manufacturer Catalog Number Approval Date Photos
Polara Engineering, Inc. XAV2E-LED (Yellow)
XAV2E-LED-B (Black)

XAVCU2-DC - Included Control Unit

7/13/15
Comment:
Three yellow LED's above push button
Audible locator
Auto volume adjustment for ambient noise levels
No braille on face plate

Aluminum Pedestal Poles

Notes Manufacturer Catalog Number Approval Date Photos
Component Products, Inc Square Pedestal Base: CPI-BAS-1-P

14’ Pedestal Pole: CPI-AP-14-40
Base Collar: CPI-RBC-1

4/24/14 Base
Gades Sales Square Pedestal Base: PB-5335-1S-GL-PNC

14’ Pedestal Pole: PB5100-14-PNC
Base Collar: PB-5325-PNC

4/24/14 Side View
Bottom View
Threaded Opening
Cover
Pelco Products, Inc. Square Pedestal Base: PB-5335-1S-GL-PNC

14’ Pedestal Pole: PB-5100-14-PNC
Base Collar: PB-5325-PNC

4/23/14 Base
Base & Collar
Comment:
For Concrete Foundation, See "Anchor Bolts" for part number information. Include anchor bolts
Can substitute screw-in foundation
Pole tube is schedule 40
Include base collar with every pole
Set screws required in base collar
Include 2 7/8” OD x 7/8” ID galvanized flat washers

Up arrow 66x80.png Top Return to Approved Materials
Side arrow 80x66.png

School Zone Flashers

Radio Installations

Notes Manufacturer Catalog Number Approval Date Photos
RTC Manufacturing, Inc. Master Radio
Assembly: RTC#501676F
Master Radio Only: RTC #300650A

Remote Radio
RTC #300600
9/15/10
Comment:
Used only when access to a traffic signal cabinet is available
The master assembly installs in traffic signal cabinet and consists of: Ethernet LAN Assembly Serial Port Server, Power Supplies, Cables, 6dB Omni Antenna & 50ft Lead
The remote radio installs in the beacon cabinet
Every installation requires one Master and two Remote radios (See below)

Modem Installations

Notes Manufacturer Catalog Number Approval Date Photos
RTC Manufacturing, Inc. RTC M2MTSC 6/4/19
Comment:
Not used with Master Radio Assembly installations
Equipment consists of cable slide on bracket and antenna
Installs at beacon assembly

Surge Protector Polyphaser

Notes Manufacturer Catalog Number Approval Date Photos
RTC Manufacturing, Inc. IS-50NX-C2 9/15/10
Comment:
Only used with Master Radio Assembly installations
Installs at traffic signal cabinet

Time Switch

Notes Manufacturer Catalog Number Approval Date Photos
RTC Manufacturing, Inc. RTC AP-22 9/15/10 Front View
End View
Comment:
Required for both radio and modem installations
Installs at beacon assembly
Includes antenna and CPC Harness

Yellow Ball LED

Notes Manufacturer Catalog Number Approval Date Photos
DiaLight DuraLED 433-3230-905XL 6/4/19
GE DR6-YTFB-23B 5/5/03
Leotek TSL-12Y-LX-IL6-B1-P3-ULP 6/4/19
Comment:
10-28 volt DC power requirement

Vehicular Signal Head

Notes Manufacturer Catalog Number Approval Date Photos
Econolite Control Products, Inc. Yellow Body:
TP11VJC2P0H0 for 1 Section

Black Body:
TP11VJF2P0H0 for 1 Section
5/9/03 Front View
Back View
Open Front View
Wiring Terminals
Latch
McCain Traffic Supply Yellow Body:
M22167-P for 1 Section

Black Body:
M22168-P for 1 Section

M19271 Black Poly Visors
5/14/13 Open Front View
Wiring Terminal
Side View
Latch
Label
Mobotrex / Eagle Signal Yellow Body
SA101A1111YBB – 1 Section
5/5/03
Peek Traffic Yellow Body
PSS81S001FO for 1 Section

Black Body
PSS81E001FO for 1 Section
5/5/03

Side-of-Pole Bracket

Notes Manufacturer Catalog Number Approval Date Photos
Mobotrex / Eagle Signal Assembly w/ two brackets:
UKS-1452Y
Single Brackets:
Yellow - PDM-05443-02
Black - PDM-05443-03
5/5/03
Pelco Products, Inc. SE-0567-PNC 6/4/19

Solar Panel

Notes Manufacturer Catalog Number Approval Date Photos
American Solar Wholesale ASW-30 6/4/19
RTC Manufacturing, Inc. Solar Panel 5/5/03

Flasher Panel

Notes Manufacturer Catalog Number Approval Date Photos
RTC Manufacturing, Inc. For Radio Installations:
502598TFA

For Modem Installations:
502598SWG
5/5/03
Comment:
“L” Panel

Flasher

Notes Manufacturer Catalog Number Approval Date Photos
RTC Manufacturing, Inc. DCF2 5/5/03
Comment:
Only used with Master Radio Assembly installations
12-Volt, Solid State, w/ LED indicators
DC 2-Circuit Flasher
8-Pin Octal Base

Flasher Cabinet

Notes Manufacturer Catalog Number Approval Date Photos
RTC Manufacturing, Inc. RTC-503333HBK 6/4/19

Screw-In Foundation

Notes Manufacturer Catalog Number Approval Date Photos
JH Botts JHB660-912 1/25/15 Isometric View
Comment:
For use with flashing school beacons
Shaft Diameter – 6”
Shaft Length – 5’-0”
Plate Size – 12” square x 1” Thick
Bolt Circle Diameter – 9” to 12”

Round Pedestal Pole

Notes Manufacturer Catalog Number Approval Date Photos
Component Products, Inc Square Pedestal Base: CPI-BAS-1-P
Pole Cap: CPI-APC-1
15’ Pedestal Pole: CPI-AP-15-40
Base Collar: CPI-RBC-1
4/24/14 Base
Gades Sales Square Pedestal Base: PB-5335-1S-GL-PNC
Pole Cap: PB-5402-PNC
15’ Pedestal Pole: PB5100-15-PNC
Base Collar: PB-5325-PNC
4/24/14 Side View
Bottom View
Threaded Opening
Cover
Pelco Products, Inc. Square Pedestal Base: PB-5335-1S-GL-PNC
Pole Cap: PB-5402-PNC
15’ Pedestal Pole: PB-5100-15-PNC
Base Collar: PB-5325-PNC
4/23/14 Base
Base & Collar

Up arrow 66x80.png Top Return to Approved Materials
Side arrow 80x66.png

Sign Sheeting

Type XI Diamond Grade "Full Cube" Sheeting

Notes Manufacturer Catalog Number Approval Date Photos
Avery Dennison OmniCube Series:
White: T-11500
Yellow: T-11501
Blue: T-11505
Green: T-11507
Red: T-11508
Fluorescent Yellow: T-11511
Fluorescent Yellow-Green: T-11513
Fluorescent Orange: T11514
8/25/10
3M Diamond Grade Cube Corner (DG3 Series):
White: 4090
Yellow: 4091
Red: 4092
Blue: 4095
Green: 4097
Fluorescent Yellow: 4081
Fluorescent Yellow-Green: 4083
Fluorescent Orange: 4084
6/23/05
Comment:
ASTM Type XI
For most signs (See City of Overland Park Standard Details)
♦ Fluorescent Yellow-Green is reserved for School Zone Signing
♦ Fluorescent is reserved for special Warning Signs
♦ Yellow shall be used for all Warning Signs unless otherwise specified

Electronic Cuttable Film

Notes Manufacturer Catalog Number Approval Date Photos
Avery Dennison Yellow: OL-2001
Red: OL-2008
Orange: OL-2004
Blue: OL-2005
Green: OL-2007
Brown: OL-2009
Black: OL-2003
5/5/03
3M Yellow: EC Series 1171
Red: EC Series 1172
Orange: EC Series 1174
Blue: EC Series 1175
Green: EC Series 1177
Brown: EC Series 1179
Black: EC Series 1178
5/5/03

Flexible Sheeting for Traffic Signal Pushbutton Posts

Notes Manufacturer Catalog Number Approval Date Photos
3M Flexible Work Zone Sheeting:
White: 3910
Fluorescent Yellow: 3911
1/14/2020
Comment:
Fluorescent Yellow shall only be used on traffic signal pushbutton posts located in medians.

Up arrow 66x80.png Top Return to Approved Materials
Side arrow 80x66.png

Tubular Delineators

Flush Mounted Tubular Delineator

Notes Manufacturer Catalog Number Approval Date Photos
Pexco / Davidson Traffic
Control Products
DP236 36" white post w/ 2 - 3" white FHIP wraps:
#833DP236WHT001

DP236 36" yellow post w/ 2 - 3" yellow FHIP wraps:
#833DP236YEL001
12/10/13 Side View
Top
Comment:
DP200 Series
NCHRP 350 Compliant
360 degree retro-reflectivity
Adhesive Base Only

Ground Mounted Tubular Delineator

Notes Manufacturer Catalog Number Approval Date Photos
Pexco / Davidson Traffic
Control Products
36" white UR post w/ 1 - 3" x 9" FHIP white wrap:
#833GM336WHTUR100
36" yellow UR post w/ 1 - 3" x 9" FHIP yellow wrap:
#833GM336YELUR102
2" x 12" 12 ga. anchor - #8GMANCHOR12
Quick Release Pin (one per post) - #800HDWE101
12/10/13 Side View
Bottom View
Top View
Label
Comment:
FG-300 Ground Mount
NCHRP 350 Compliant

Up arrow 66x80.png Top Return to Approved Materials
Side arrow 80x66.png