Difference between revisions of "Approved Materials - Signing"
Jump to navigation
Jump to search
Brian Geiger (talk | contribs) |
Brian Geiger (talk | contribs) (→Traffic Sign Mast Arm Brackets: Fixed band lengths.) |
||
| Line 197: | Line 197: | ||
|} | |} | ||
{{PQLNote|Stainless steel banding and hardware<br>Required banding length (LL) to be determined by contractor based on manufacturer's recommendation as follows:<br> | {{PQLNote|Stainless steel banding and hardware<br>Required banding length (LL) to be determined by contractor based on manufacturer's recommendation as follows:<br> | ||
29” – for mast arm diameters ranging from 2” to 7”<br>42” – for mast arm diameters ranging from 8” to 11”<br>59” – for mast arm diameters ranging from 12” to 17”<br> | |||
Tube Length (XX) varies. Use the longest that will fit the sign and cut off excess (18", 24", 46", 60", 74" or 96")<br>For signs longer than 102", use two mounting bracket kits with shorter tubes.<br>Channel Length (YY) and number varies. Use longest channel that will not exceed sign size (8", 14", or 23")<br>2 channels for 18" to 46" tubes<br>3 channels for 60" to 74" tubes <br>4 channels for 96" tubes<br>Don't exceed sign area of 2,000 square inches per clamp kit<br>If other than standard color, specify SB-BLK for Black Powder Coat or SP-SPL for Special Color Powder Coat}} | |||
=== Overhead Street Name Sign Mast Arm Brackets === | === Overhead Street Name Sign Mast Arm Brackets === | ||
Revision as of 15:53, 16 January 2019
Return to Complete Preapproved Materials Page
 |
Note: This document is provided as a benefit to contractors and suppliers who are bidding projects for the City of Overland Park. Only products identified on this list will be approved for installation on City construction projects. This list shall not be used as a substitute for catalog cuts or material approval. All material approvals shall be submitted on the approved City of Overland Park Contract Project Submittal form. The form is available at City Hall by contacting Bruce Wacker at (913) 895-6027. Failure to comply will be cause for rejection of materials until proper submittals are received. This list is updated periodically. The contractor or supplier shall contact the City of Overland Park to make sure that they have the most current list prior to bidding a project. Failure to do so shall not constitute a legitimate claim for change orders. Before accessing any links, the City recommends that the user delete browsing history to insure the latest catalog cut information is displayed correctly. |
Aluminum Sign Blanks
Standard Signs
| Notes | Manufacturer | Catalog Number | Approval Date | Photos |
| Hall Sign | ||||
| Lyle Sign, Inc. | ||||
| National Sign | ||||
| Newman | ||||
| The Work Zone, Inc. | ||||
| Vulcan Sign |
| Comment: | ||
| 0.080” Thick 5052H38 or 6061-T6 aluminum alloy |
Overhead Street Name Signs
| Notes | Manufacturer | Catalog Number | Approval Date | Photos |
| Hall Sign | ||||
| Lyle Sign, Inc. | ||||
| National Sign | ||||
| Newman | ||||
| The Work Zone, Inc. | 5052H38 aluminum | |||
| Vulcan Sign |
| Comment: | ||
| 0.125” Thick 5052H38 or 6061-T6 aluminum alloy |
|
Top | Return to Approved Materials |  |
Blank-Out Signs
| Notes | Manufacturer | Catalog Number | Approval Date | Photos |
| Nova Tech LLC is the sales representative |
M-Systems, Inc. | Spec Sheet R10-11 R10-11b |
1/12/09 | Sign Face |
| Comment: | ||
| R10-11: 24” x 30” or 36" x 48" (See MUTCD), No Turn on Red "Ball" - White text with “Red Ball” symbol R10-11b: 36" x 36", No Turn on Red - White text Front Lens: Complete blank out when "Off" Single row LED |
Cable for Illuminated Street Name Signs & Blank-out Signs
Sign Power Cable
| Notes | Manufacturer | Catalog Number | Approval Date | Photos |
| Advanced Digital Cable | 8103 | 10/23/08 | ||
| Falcon Fine Wire | 980314X19-1 | 11/6/08 | Jacket Label |
| Comment: | ||
| 1-3c#14 AWG Stranded Copper IMSA 19-1 |
|
|
Top | Return to Approved Materials | |
Driver Feedback Signs
| Notes | Manufacturer | Catalog Number | Approval Date | Photos |
| TrafficCalm Systems | M75-012SE-000x x = Sign Face Color 1 = White 2 = Fluorescent Yellow-Green 3 = Fluorescent Orange 4 = Yellow |
6/21/18 |
| Comment: | ||
| Location as determined by the City of Overland Park White Sign, Solar Power, 20W Panel Universal Mounting Bracket & Pole Mount Plate |
Illuminated Street Name Signs
| Notes | Manufacturer | Catalog Number | Approval Date | Photos |
| Southern Manufacturing/ Accord Industries |
LEXZZSBRYNAAD1: Standard Number Format LE619SBRYNAAD1: 6’ x 19” LE819SBANNAAD1: 8’ x 19” LE624SBANNAAD1: 6’x 24” LE824SBANNAAD1: 8’ x 24” |
10/29/08 | Front View Back View End View LED Driver LED Light Bar Hasp Hinge Terminal Block Fuse Sheeting |
| Comment: | ||
| Legend: LE = Standard LED Sign X = Sign Width (4, 5, 6, 7, 8, 9, or 10 ft) ZZ = Sign Height (19 or 24 inches) S = Single Sided Sign B = Rigid Mount Top and Bottom A = Tri-stud Punch Pattern N = Mounting Brackets are Not Included with Sign N = No Photocell AA = Monarch Black D = Diamond Grade Translucent ASTM Type XI Retroreflective Sheeting 1 = Green EC Film Background Font: Emod 2000 8"UC/6"LC |
|
|
Top | Return to Approved Materials | |
Mounting Brackets
Traffic Sign Mast Arm Brackets
| Notes | Manufacturer | Catalog Number | Approval Date | Photos |
| A Division of Olson Aluminum Castings |
Sky Bracket | SS-SBLL-SBK-XXTK-YY Standard Bracket Tube Kit 8" Sign Kit 14" Sign Kit 23" Sign Kit Bracket Schematic |
1/16/19 | Shown with previously approved cable mounting system. Front View Back View Side View Sign Channel |
| Comment: | ||
| Stainless steel banding and hardware Required banding length (LL) to be determined by contractor based on manufacturer's recommendation as follows: 29” – for mast arm diameters ranging from 2” to 7” |
Overhead Street Name Sign Mast Arm Brackets
| Notes | Manufacturer | Catalog Number | Approval Date | Photos |
| A Division of Olson Aluminum Castings |
Sky Bracket | SS-SBLL-SBK-XXTK-YY Standard Bracket Tube Kit 14" Sign Kit 23" Sign Kit Bracket Schematic |
1/16/19 | Showing previously approved cable mounting system. Bracket Front View Bracket Back View Sign Support Channel |
| Comment: | ||
| Stainless steel banding and hardware Required banding length (LL) to be determined by contractor based on manufacturer's recommendation as follows: 66” – for mast arm diameters ranging from 2” to 7” 90” – for mast arm diameters ranging from 8” to 11” 120” – for mast arm diameters ranging from 12” to 15” 165” – for mast arm diameters ranging from 16” to 22" Tube Length (XX) varies. Use the longest that will fit the sign and cut off excess (18", 24", 46", 60", 74" or 96") For signs longer than 102", use two mounting bracket kits with shorter tubes. Channel Length (YY) and number varies. Use longest channel that will not exceed sign size (8", 14", or 23") 2 channels for 18" to 46" tubes 3 channels for 60" to 74" tubes 4 channels for 96" tubes Don't exceed sign area of 2,000 square inches per clamp kit If other than standard color, specify SB-BLK for Black Powder Coat or SP-SPL for Special Color Powder Coat |
Illuminated Street Name Sign Brackets
| Notes | Manufacturer | Catalog Number | Approval Date | Photos |
| A Division of Olson Aluminum Castings |
Sky Bracket | SS-SBCLL-TS-37 Upper Bracket Arm Lower Bracket Arm |
3/15/16 |
| Comment: | ||
| Stainless steel cable and hardware Required cable length (LL) to be determined by contractor based on manufacturer's recommendation as follows: 66” – for mast arm diameters ranging from 2” to 7” 90” – for mast arm diameters ranging from 8” to 11” 120” – for mast arm diameters ranging from 12” to 15” 165” – for mast arm diameters ranging from 16” to 22" If other than standard color, specify SB-BLK for Black Powder Coat or SP-SPL for Special Color Powder Coat |
Wing Mounting Brackets
| Notes | Manufacturer | Catalog Number | Approval Date | Photos |
| Hall Signs | 24” - #800: Item Id: 400-016000 | 8/3/07 | ||
| Lyle Signs, Inc. | AL-13 | 8/3/07 | ||
| Tapco Inc. | 24” - #800: 037-00015 | 7/3/14 |
| Comment: | ||
| A380 Alloy |
Round Pole Mounting Bracket
| Notes | Manufacturer | Catalog Number | Approval Date | Photos |
| Band-It | Flared Leg Bracket, Stainless Steel Bolt, Washer and Fiber Washer: D02199 | 8/3/07 | Top View Side View | |
| It Straps On, Inc. | Flared Leg Bracket w/ SS Bolt & SS Washer: SB021 Provide plastic washer separately |
8/3/07 | ||
| ITW Strapbinder | Flared Leg Bracket w/ SS Bolt and Plastic Washer: ST021 Provide stainless steel washer separately |
8/3/07 | ||
| MD Solutions | Flared Leg Bracket, Stainless Steel Bolt, Washer and Plastic Washer: PLUS+4SS | 11/9/17 | Flared Leg Bracket Parts | |
| PermaBand | Flared Leg Bracket w/ SS Bolt & SS Washer: PMB02150 Plastic Washer: PMP00350 |
5/1/17 | Flared Leg Bracket Top View Side View Bolt Plastic Washer | |
| TAPCO, Inc. | Bracket: 035-00008 SS Bolt: 035-00010 Nylon Washer: 052-00295 Provide stainless steel washer separately |
8/3/07 | ||
| Xcessories Squared | Flared Leg Bracket w/ SS Bolt and Plastic Washer: XST021 Provide stainless steel washer separately |
4/13/16 |
| Comment: | ||
| One Stainless Steel 5/16"-18 x 3/4" Bolt Flared Leg Stainless steel and plastic washers shall be provided separately if not listed |
|
|
Top | Return to Approved Materials | |
Sign Banding
| Notes | Manufacturer | Catalog Number | Approval Date | Photos |
| Band-It | C20699 | 8/3/07 | Label Name Label Grade | |
| It Straps On, Inc. | BA206 | 8/3/07 | ||
| ITW Strapbinder | ST206 | 8/3/07 | ||
| MD Solutions | 3430-SS | 11/9/17 | Banding | |
| Panduit | MSW75T30-CR2 | 11/5/12 | ||
| PermaBand | PMB206 | 5/1/17 | Banding Band and Buckle | |
| TAPCO Inc. | 497-00001 | 8/3/07 | ||
| Xcessories Squared | SSB75-30 | 4/13/16 |
| Comment: | ||
| Grade 201 Stainless Steel 0.030” Thick ¾” Wide |
Banding Buckle
| Notes | Manufacturer | Catalog Number | Approval Date | Photos |
| Band-It | C25699 | 8/3/07 | Top View Buckle w/ Strap | |
| It Straps On, Inc. | BU256 | 8/3/07 | ||
| ITW Strapbinder | ST256 | 8/3/07 | ||
| MD Solutions | BK34-SS | 11/9/17 | Buckle | |
| Panduit | MSBW75-C2 | 11/5/12 | ||
| PermaBand | PMB256 | 5/1/17 | Buckle Side View Banding and Buckle | |
| TAPCO, Inc. | 497-00002 | 8/3/07 | ||
| Xcessories Squared | XST256 | 4/13/16 |
| Comment: | ||
| Grade 201 Stainless Steel Buckle For 0.030” Thick x ¾” Wide Banding |
Parking Lot Sign Bollard
| Notes | Manufacturer | Catalog Number | Approval Date | Photos |
| Impact Recovery Systems | No Sign: SS4Y-42-SP | 5/10/17 | Adapter & Post Elastomer Base Assembly |
| Comment: | ||
| Fill bollard with concrete per manufacturer's recommendation |
Posts and Anchors
1 ¾” x 1 ¾” Posts
| Notes | Manufacturer | Catalog Number | Approval Date | Photos |
| Allied Tube & Conduit A Division of Atcore International |
Telespar Square Tubular Sign Supports 16F12PXXPG |
8/31/12 |
| Comment: | ||
| 12 Gauge Pre-punched holes on all sides Galvanized XX = Length (even 2’ increments up to 24’) |
2” x 2” Anchor
| Notes | Manufacturer | Catalog Number | Approval Date | Photos |
| Allied Tube & Conduit A Division of Atcore International |
Telespar Square Tubular Sign Supports 4' Anchor - 20F12A04PG |
11/9/12 |
| Comment: | ||
| 12 Gauge Pre-punched holes on all sides Galvanized 48" in length |
2 ¼” x 2 ¼” Sleeves
| Notes | Manufacturer | Catalog Number | Approval Date | Photos |
| Allied Tube & Conduit A Division of Atcore International |
Telespar Square Tubular Sign Supports 22F12A02.5PG |
8/31/12 |
| Comment: | ||
| 12 Gauge Pre-punched holes on all sides Galvanized 30” length |
Concrete Surface Mount Sign Post Anchor
| Notes | Manufacturer | Catalog Number | Approval Date | Photos |
| Xcessories Squared | Kleen Break Model 425 Sign Post Coupler XKBSM42520-G |
4/13/16 | Top Half Coupling Surface Mount Anchor Surface Mount Iso View Locking Wedge Shear Bolt |
| Comment: | ||
| Concrete Surface Mount to be used only when installing signs on concrete medians, bridge decks, or sidewalks |
Paver Median or Island Sign Post Anchor
| Notes | Manufacturer | Catalog Number | Approval Date | Photos |
| Xcessories Squared | Kleen Break Model 425 Sign Post Coupler XKB42520-G AXT225-36-G Anchor Extension |
4/13/16 | Top Half Coupling Paver Mount Anchor Paver Mount Iso View Locking Wedge Shear Bolt |
| Comment: | ||
| Paver Median or Island Mount to be used only when installing signs in medians or islands that have paver bricks |
|
|
Top | Return to Approved Materials | |
Rectangular Rapid Flashing Beacon (RRFB)
RRFB For Use with Standard Push Button
Solar Engine
| Notes | Manufacturer | Catalog Number | Approval Date | Photos |
| Carmanah Technologies Corp | R920 Series | 12/17/13 | Front View Back View Side View | |
| TraffiCalm Systems | Controller: M75-SA300-CTLX Collaborator: M75-SA300-CLBX |
1/9/19 | Solar Panel Front View Solar Panel Back View |
| Comment: | ||
| Use only with standard, non-audible push buttons Mount on standard perforated square sign posts Color: Natural Aluminum |
Mounting Bracket
| Notes | Manufacturer | Catalog Number | Approval Date | Photos |
| Carmanah Technologies Corp | 68362 - 2" square post mount 69107 - Side of Post Mount (Black) |
12/17/13 | ||
| TraffiCalm Systems | Mounting Bracket is Included with Controller | 1/9/19 |
| Comment: | ||
| Mounting bracket varies based on type of installation Side of post mount is not available in Natural |
Light Bar
| Notes | Manufacturer | Catalog Number | Approval Date | Photos |
| Carmanah Technologies Corp | 68352 | 12/17/13 | Front View Back View End View LED's | |
| TraffiCalm Systems | M75-SA328-0000 | 1/9/19 | Front View Back View End View LED's |
| Comment: | ||
| Light bar with confirmation lights |
Pedestrian Pushbutton
| Notes | Manufacturer | Catalog Number | Approval Date | Photos |
| Campbell Co | 4EVR 120 – X – No LED | 4/5/12 | ||
| Polara Engineering, Inc. | Bulldog Series Push Button Assembly – BDSP-010-X Pole Mount Adaptor – BDPM-X |
2/10/12 |
| Comment: | ||
| Sound on actuation NO LED Flash X= B for Black or Y for Yellow |
Sign Posts, Anchors and Sleeves
| Notes | Manufacturer | Catalog Number | Approval Date | Photos |
| Unistrut Distribution Co./ Allied Mechanical Tube Division |
Telespar Square Tubular Sign Supports 2" x 2" Post - 20F12P14PG 2-1/4" x 2-1/4" Anchor - 22F12A04PG 2-1/2" x 2-1/2" Anchor Sleeve - 24F12APG |
12/16/13 |
| Comment: | ||
| 12 Guage Pre-punched holes on all sides Galvanized 14' length for 2" x 2" post 48" length for 2-1/4" x 2-1/4" Anchor 18" length for 2-1/2" x 2-1/2" Anchor Sleeve See "Aluminum Sign Blanks" and "Sign Sheeting" for approved materials for the R10-25, S1-1 and W16-7p signs |
|
|
Top | Return to Approved Materials | |
RRFB For Use with Audible Push Button
Solar Engine
| Notes | Manufacturer | Catalog Number | Approval Date | Photos |
| Carmanah Technologies Corp | Model SC315 GenIII | 7/13/15 |
| Comment: | ||
| Use only with audible push buttons Mount on standard pedestrian signal post Color: Natural Aluminum |
Mounting Bracket
| Notes | Manufacturer | Catalog Number | Approval Date | Photos |
| Carmanah Technologies Corp | 71859 - 4" to 4-1/2" Diameter Post Mount 71858 - Side of Pole Mount |
7/13/15 |
| Comment: | ||
| Mounting bracket varies based on type of installation |
Light Bar
| Notes | Manufacturer | Catalog Number | Approval Date | Photos |
| Carmanah Technologies Corp | 68352 | 7/13/15 | Front View Back View End View LED's |
| Comment: | ||
| Light bar with confirmation lights |
Pedestrian Pushbuttons ADA Audible
| Notes | Manufacturer | Catalog Number | Approval Date | Photos |
| Polara Engineering, Inc. | XAV2E-LED (Yellow) XAV2E-LED-B (Black) |
7/13/15 |
| Comment: | ||
| Three yellow LED's above push button Audible locator Auto volume adjustment for ambient noise levels No braille on face plate |
Aluminum Pedestal Poles
| Notes | Manufacturer | Catalog Number | Approval Date | Photos |
| Component Products, Inc | Square Pedestal Base: CPI-BAS-1-P |
4/24/14 | Base | |
| Gades Sales | Square Pedestal Base: PB-5335-1S-GL-PNC |
4/24/14 | Side View Bottom View Threaded Opening Cover | |
| Pelco Products, Inc. | Square Pedestal Base: PB-5335-1S-GL-PNC |
4/23/14 | Base Base & Collar |
| Comment: | ||
| For Concrete Foundation, See "Anchor Bolts" for part number information. Include anchor bolts Can substitute screw-in foundation Pole tube is schedule 40 Include base collar with every pole Set screws required in base collar Include 2 7/8” OD x 7/8” ID galvanized flat washers |
|
|
Top | Return to Approved Materials | |
School Zone Flashers
Master Radio Assembly
| Notes | Manufacturer | Catalog Number | Approval Date | Photos |
| RTC Manufacturing, Inc. | Master Radio Assembly – RTC#501676F Master Radio Only – RTC #300650A |
9/15/10 |
| Comment: | ||
| Assembly installs in traffic signal cabinet and consists of: Ethernet LAN Assembly Serial Port Server, Power Supplies, Cables, 6dB Omni Antenna & 50ft Lead |
Remote Radio
| Notes | Manufacturer | Catalog Number | Approval Date | Photos |
| RTC Manufacturing, Inc. | RTC #300600 | 9/15/10 |
| Comment: | ||
| Installs at beacon assembly. |
Surge Protector Polyphaser
| Notes | Manufacturer | Catalog Number | Approval Date | Photos |
| RTC Manufacturing, Inc. | #IS-50NX-C2 | 9/15/10 |
| Comment: | ||
| Installs at traffic signal cabinet |
Time Switch
| Notes | Manufacturer | Catalog Number | Approval Date | Photos |
| RTC Manufacturing, Inc. | RTC AP-22 #503644 | 9/15/10 | Front View End View |
| Comment: | ||
| Installs at beacon assembly. Includes antenna and CPC Harness |
Yellow Ball LED
| Notes | Manufacturer | Catalog Number | Approval Date | Photos |
| DiaLight | DuraLED 433-3230-901XL | 4/30/10 | ||
| GelCore | DR6-YTFB-23B | 5/5/03 |
| Comment: | ||
| 12-volt power requirement |
Vehicular Signal Head
| Notes | Manufacturer | Catalog Number | Approval Date | Photos |
| Automatic Signal / Eagle Signal | SA101A1111YBB – 1 Section | 5/5/03 |
Side-of-Pole Bracket
| Notes | Manufacturer | Catalog Number | Approval Date | Photos |
| Gades Sales | UKS-1452Y / PDM-405 | 5/5/03 |
Solar Panel
| Notes | Manufacturer | Catalog Number | Approval Date | Photos |
| RTC Manufacturing, Inc. | Solar Panel | 5/5/03 |
| Comment: | ||
| 80 Watt w/ mounting brackets |
Solar Flasher Panel
| Notes | Manufacturer | Catalog Number | Approval Date | Photos |
| RTC Manufacturing, Inc. | 502598TFA | 5/5/03 |
| Comment: | ||
| “L” Panel |
Flasher
| Notes | Manufacturer | Catalog Number | Approval Date | Photos |
| RTC Manufacturing, Inc. | DC2F | 5/5/03 |
| Comment: | ||
| 12-Volt, Solid State, w/ LED indicators DC 2-Circuit Flasher 8-Pin Octal Base |
Solar Cabinet
| Notes | Manufacturer | Catalog Number | Approval Date | Photos |
| RTC Manufacturing, Inc. | RTC-503568 | 5/5/03 |
Screw-In Foundation
| Notes | Manufacturer | Catalog Number | Approval Date | Photos |
| JH Botts | JHB660-912 | 1/25/15 | Isometric View |
| Comment: | ||
| For use with flashing school beacons Shaft Diameter – 6” Shaft Length – 5’-0” Plate Size – 12” square x 1” Thick Bolt Circle Diameter – 9” to 12” |
Round Pedestal Pole
| Notes | Manufacturer | Catalog Number | Approval Date | Photos |
| Gades Sales | 15’ Pedestal Pole | 5/5/03 |
|
|
Top | Return to Approved Materials | |
Sign Sheeting
Type XI Diamond Grade "Full Cube" Sheeting
| Comment: | ||
| ASTM Type XI For most signs (See City of Overland Park Standard Details) ♦ Fluorescent Yellow-Green is reserved for School Zone Signing ♦ Fluorescent is reserved for special Warning Signs ♦ Yellow shall be used for all Warning Signs unless otherwise specified |
Electronic Cuttable Film
Flexible Sheeting for Traffic Signal Pushbutton Posts
| Notes | Manufacturer | Catalog Number | Approval Date | Photos |
| 3M | Flexible Work Zone Sheeting: White: 3910 Fluorescent Yellow: 3911 |
TBD |
| Comment: | ||
| Fluorescent Yellow shall only be used on traffic signal pushbuttons posts located in medians. |
|
|
Top | Return to Approved Materials | |
Tubular Delineators
Flush Mounted Tubular Delineator
| Notes | Manufacturer | Catalog Number | Approval Date | Photos |
| Pexco / Davidson Traffic Control Products |
DP236 36" white post w/ 2 - 3" white FHIP wraps: #833DP236WHT001 DP236 36" yellow post w/ 2 - 3" yellow FHIP wraps: #833DP236YEL001 |
12/10/13 | Side View Top |
| Comment: | ||
| Maintenance Use Special Application Only DP200 Series NCHRP 350 Compliant 360 degree retro-reflectivity Adhesive Base Only |
Ground Mounted Tubular Delineator
| Comment: | ||
| Maintenance Use Special Application Only FG-300 Ground Mount NCHRP 350 Compliant |