Approved Materials - Signing
Revision as of 14:16, 29 February 2016 by Bruce Wacker (talk | contribs) (→Traffic Sign Mast Arm Brackets)
Return to Complete Preapproved Materials Page
 |
Note: This document is provided as a benefit to contractors and suppliers who are bidding projects for the City of Overland Park. Only products identified on this list will be approved for installation on City construction projects. This list shall not be used as a substitute for catalog cuts or material approval. All material approvals shall be submitted on the approved City of Overland Park Contract Project Submittal form. The form is available at City Hall by contacting Bruce Wacker at (913) 895-6027. Failure to comply will be cause for rejection of materials until proper submittals are received. This list is updated periodically. The contractor or supplier shall contact the City of Overland Park to make sure that they have the most current list prior to bidding a project. Failure to do so shall not constitute a legitimate claim for change orders. Before accessing any links, the City recommends that the user delete browsing history to insure the latest catalog cut information is displayed correctly. |
Aluminum Sign Blanks
Standard Signs
| Notes | Manufacturer | Catalog Number | Approval Date | Photos |
| Hall Sign | ||||
| Lyle Sign, Inc. | ||||
| National Sign | ||||
| Newman | ||||
| The Work Zone, Inc. | ||||
| Vulcan Sign |
| Comment: | ||
| 0.080” Thick 5052H38 or 6061-T6 aluminum alloy |
Overhead Street Name Signs
| Notes | Manufacturer | Catalog Number | Approval Date | Photos |
| Hall Sign | ||||
| Lyle Sign, Inc. | ||||
| National Sign | ||||
| Newman | ||||
| The Work Zone, Inc. | 5052H38 aluminum | |||
| Vulcan Sign |
| Comment: | ||
| 0.125” Thick 5052H38 or 6061-T6 aluminum alloy |
|
Top | Return to Approved Materials |  |
Blank-Out Signs
| Notes | Manufacturer | Catalog Number | Approval Date | Photos |
| Nova Tech LLC | M-Systems, Inc. | Spec Sheet R10-11 R10-11b |
1/12/09 | Sign Face |
| Comment: | ||
| R10-11: 30” x 36”, No Turn on Red "Ball" - White text with “Red Ball” symbol R10-11b: 36" x 36", No Turn on Red - White text Front Lens: Complete blank out when "Off" Single row LED |
Cable for Illuminated Street Name Signs & Blank-out Signs
Sign Power Cable
| Notes | Manufacturer | Catalog Number | Approval Date | Photos |
| Advanced Digital Cable | 8103 | 10/23/08 | ||
| Falcon Fine Wire | 980314X19-1 | 11/6/08 | Jacket Label |
| Comment: | ||
| 1-3c#14 AWG Stranded Copper IMSA 19-1 |
|
|
Top | Return to Approved Materials | |
Driver Feedback Signs
| Comment: | ||
| Location as determined by the City of Overland Park White Sign, Solar Power, 20W Panel Universal Mounting Bracket & Pole Mount Plate |
Illuminated Street Name Signs
| Notes | Manufacturer | Catalog Number | Approval Date | Photos |
| Southern Manufacturing/ Accord Industries |
619S-RM-TB: 6’ x 19” 819S-RM-TB: 8’ x 19” 624S-RM-TB: 6’x 24” 824S-RM-TB: 8’ x 24” |
10/29/08 | Front View Back View End View LED Driver LED Light Bar Hasp Hinge Terminal Block Fuse Sheeting |
| Comment: | ||
| 120/240-volt self sensing power supply Translucent DG3 retroreflective sheeting Single sided face, rigid mount top and bottom Font: Emod 2000 8"UC/6"LC |
|
|
Top | Return to Approved Materials | |
Mounting Brackets
Traffic Sign Mast Arm Brackets
| Notes | Manufacturer | Catalog Number | Approval Date | Photos | Notes |
| A Division of Olson Aluminum Castings |
Sky Bracket | SS-SBCLL-SBK-XXTK-YY Standard Bracket Tube Kit 8" Sign Kit 14" Sign Kit 23" Sign Kit Bracket Schematic |
2/29/16 | Bracket Front View Bracket Back View Sign Support Channel |
LL = Cable Length (66", 90", 120" or 165") See Approval Memo for Recommended Length XX = Tube Length (18", 24", 46", 60", 74" or 96") For signs longer than 102", use two shorter tubes with bracket kits. YY = Sign Mounting Channel Length (14", or 23") Use the longest sign bracket that will fit on a sign/font> |
| Comment: | ||
| Stainless steel cable (Required length to be determined by contractor based on manufacturer's recommendation) All other hardware to be stainless steel |
Overhead Street Name Sign Mast Arm Brackets
| Notes | Manufacturer | Catalog Number | Approval Date | Photos | Notes |
| A Division of Olson Aluminum Castings |
Sky Bracket | SS-SBCLL-SBK-XXTK-YY Standard Bracket Tube Kit 14" Sign Kit 23" Sign Kit Bracket Schematic |
4/22/14 | Bracket Front View Bracket Back View Sign Support Channel |
LL = Cable Length (66", 90", 120" or 165") See Approval Memo for Recommended Length XX = Tube Length (18", 24", 46", 60", 74" or 96") For signs longer than 102", use two shorter tubes with bracket kits. YY = Sign Mounting Channel Length (14", or 23") Use 14" for 18" wide sign and 23" for 24" wide sign |
| Comment: | ||
| Stainless steel cable (Required length to be determined by contractor based on manufacturer's recommendation) All other hardware to be stainless steel |
Illuminated Street Name Sign Brackets
| Notes | Manufacturer | Catalog Number | Approval Date | Photos |
| Pelco Products, Inc. | AS-0125-2-L-PNC Astro Sign-Brac | 10/29/08 | Bracket |
| Comment: | ||
| Galvanized cable (Required length to be determined by contractor) 2 = 2 Section for 24" tall sign L = Cable Length PNC = Process No Color |
Wing Mounting Brackets
| Notes | Manufacturer | Catalog Number | Approval Date | Photos |
| Hall Signs | 16 ½” - #8: Item Id: 400-016500 24” - #800: Item Id: 400-016000 |
8/3/07 | ||
| Lyle Signs, Inc. | AL-13 | 8/3/07 | ||
| Tapco Inc. | 16 ½” - #8: 037-00008 24” - #800: 037-00015 |
7/3/14 |
| Comment: | ||
| A380 Alloy |
Round Pole Mounting Bracket
| Notes | Manufacturer | Catalog Number | Approval Date | Photos |
| Band-It | D02189 | 8/3/07 | Top View Side View | |
| It Straps On, Inc. | SB021 | 8/3/07 | ||
| ITW Strapbinder | ST021 | 8/3/07 | ||
| TAPCO, Inc. | Bracket: 035-00008 Bolt: 035-00010 |
8/3/07 |
| Comment: | ||
| One Stainless Steel 5/16"-18 x 3/4" Bolt Flared Leg |
|
|
Top | Return to Approved Materials | |
Sign Banding
| Notes | Manufacturer | Catalog Number | Approval Date | Photos |
| Band-It | C20699 | 8/3/07 | Label Name Label Grade | |
| It Straps On, Inc. | BA206 | 8/3/07 | ||
| ITW Strapbinder | ST206 | 8/3/07 | ||
| Panduit | MSW75T30-CR2 | 11/5/12 | ||
| TAPCO Inc. | 497-00001 | 8/3/07 |
| Comment: | ||
| Grade 201 Stainless Steel 0.030” Thick ¾” Wide |
Banding Buckle
| Notes | Manufacturer | Catalog Number | Approval Date | Photos |
| Band-It | C25699 | 8/3/07 | Top View Buckle w/ Strap | |
| It Straps On, Inc. | BU256 | 8/3/07 | ||
| ITW Strapbinder | ST256 | 8/3/07 | ||
| Panduit | MSBW75-C2 | 11/5/12 | ||
| TAPCO, Inc. | 497-00002 | 8/3/07 |
| Comment: | ||
| Grade 201 Stainless Steel Buckle For 0.030” Thick x ¾” Wide Banding |
Posts and Anchors
1 ¾” x 1 ¾” Posts
| Notes | Manufacturer | Catalog Number | Approval Date | Photos |
| Allied Tube & Conduit A Division of Atcore International |
Telespar Square Tubular Sign Supports 16F12PXXPG |
8/31/12 |
| Comment: | ||
| 12 Gauge Pre-punched holes on all sides Galvanized XX = Length (even 2’ increments up to 24’) |
2” x 2” Anchor
| Notes | Manufacturer | Catalog Number | Approval Date | Photos |
| Allied Tube & Conduit A Division of Atcore International |
Telespar Square Tubular Sign Supports 3' Anchor – 20F12A03PG 4' Anchor - 20F12A04PG |
11/9/12 |
| Comment: | ||
| 12 Gauge Pre-punched holes on all sides Galvanized 36” or 48" in length |
2 ¼” x 2 ¼” Sleeves
| Notes | Manufacturer | Catalog Number | Approval Date | Photos |
| Allied Tube & Conduit A Division of Atcore International |
Telespar Square Tubular Sign Supports 22F12APG |
8/31/12 |
| Comment: | ||
| 12 Gauge Pre-punched holes on all sides Galvanized 18” length |
Special Bridge Deck Sign Post Anchor
| Notes | Manufacturer | Catalog Number | Approval Date | Photos |
| Xcessories Squared | Kleen Break Model 425 Concrete Surface Mount |
12/10/13 | Side View Top View Parts |
| Comment: | ||
| Concrete Surface Mount To be used only when installing signs on bridge decks |
|
|
Top | Return to Approved Materials | |
Rectangular Rapid Flashing Beacon (For Use with Standard Push Button)
Solar Engine
| Notes | Manufacturer | Catalog Number | Approval Date | Photos |
| Carmanah Technologies Corp | R920 Series | 12/17/13 | Front View Back View Side View |
| Comment: | ||
| Use only with standard, non-audible push buttons Mount on standard perforated square sign posts Color: Natural Aluminum |
Mounting Bracket
| Notes | Manufacturer | Catalog Number | Approval Date | Photos |
| Carmanah Technologies Corp | 68362 - 2" square post mount 69107 - Side of Post Mount (Black) |
12/17/13 |
| Comment: | ||
| Mounting bracket varies based on type of installation Side of post mount is not available in Natural |
Light Bar
| Notes | Manufacturer | Catalog Number | Approval Date | Photos |
| Carmanah Technologies Corp | 68352 | 12/17/13 | Front View Back View End View LED's |
| Comment: | ||
| Light bar with confirmation lights |
Pedestrian Pushbutton
| Notes | Manufacturer | Catalog Number | Approval Date | Photos |
| Campbell Co | 4EVR 120 – X – No LED | 4/5/12 | ||
| Polara Engineering, Inc. | Bulldog Series Push Button Assembly – BDSP-010-X Pole Mount Adaptor – BDPM-X |
2/10/12 |
| Comment: | ||
| Sound on actuation NO LED Flash X= B for Black or Y for Yellow |
Sign Posts, Anchors and Sleeves
| Notes | Manufacturer | Catalog Number | Approval Date | Photos |
| Unistrut Distribution Co./ Allied Mechanical Tube Division |
Telespar Square Tubular Sign Supports 2" x 2" Post - 20F12P14PG 2-1/4" x 2-1/4" Anchor - 22F12A04PG 2-1/2" x 2-1/2" Anchor Sleeve - 24F12APG |
12/16/13 |
| Comment: | ||
| 12 Guage Pre-punched holes on all sides Galvanized 14' length for 2" x 2" post 48" length for 2-1/4" x 2-1/4" Anchor 18" length for 2-1/2" x 2-1/2" Anchor Sleeve See "Aluminum Sign Blanks" and "Sign Sheeting" for approved materials for the R10-25, S1-1 and W16-7p signs |
|
|
Top | Return to Approved Materials | |
Rectangular Rapid Flashing Beacon (For Use with Audible Push Button)
Solar Engine
| Notes | Manufacturer | Catalog Number | Approval Date | Photos |
| Carmanah Technologies Corp | Model SC315 GenIII | 7/13/15 |
| Comment: | ||
| Use only with audible push buttons Mount on standard pedestrian signal post Color: Natural Aluminum |
Mounting Bracket
| Notes | Manufacturer | Catalog Number | Approval Date | Photos |
| Carmanah Technologies Corp | 71859 - 4" to 4-1/2" Diameter Post Mount 71858 - Side of Pole Mount |
7/13/15 |
| Comment: | ||
| Mounting bracket varies based on type of installation |
Light Bar
| Notes | Manufacturer | Catalog Number | Approval Date | Photos |
| Carmanah Technologies Corp | 68352 | 7/13/15 | Front View Back View End View LED's |
| Comment: | ||
| Light bar with confirmation lights |
Pedestrian Pushbuttons ADA Audible
| Notes | Manufacturer | Catalog Number | Approval Date | Photos |
| Polara Engineering, Inc. | XAV2E-LED (Yellow) XAV2E-LED-B (Black) |
7/13/15 |
| Comment: | ||
| Three yellow LED's above push button Audible locator Auto volume adjustment for ambient noise levels No braille on face plate |
Aluminum Pedestal Poles
| Notes | Manufacturer | Catalog Number | Approval Date | Photos |
| Component Products, Inc | Square Pedestal Base: CPI-BAS-1-P |
4/24/14 | Base | |
| Gades Sales | Square Pedestal Base: PB-5335-1S-GL-PNC |
4/24/14 | Side View Bottom View Threaded Opening Cover | |
| Pelco Products, Inc. | Square Pedestal Base: PB-5335-1S-GL-PNC |
4/23/14 | Base Base & Collar |
| Comment: | ||
| For Concrete Foundation, See "Anchor Bolts" for part number information. Include anchor bolts Can substitute screw-in foundation Pole tube is schedule 40 Include base collar with every pole Set screws required in base collar Include 2 7/8” OD x 7/8” ID galvanized flat washers |
|
|
Top | Return to Approved Materials | |
School Zone Flashers
Master Radio Assembly
| Notes | Manufacturer | Catalog Number | Approval Date | Photos |
| RTC Manufacturing, Inc. | Master Radio Assembly – RTC#501676F Master Radio Only – RTC #300650A |
9/15/10 |
| Comment: | ||
| Assembly installs in traffic signal cabinet and consists of: Ethernet LAN Assembly Serial Port Server, Power Supplies, Cables, 6dB Omni Antenna & 50ft Lead |
Remote Radio
| Notes | Manufacturer | Catalog Number | Approval Date | Photos |
| RTC Manufacturing, Inc. | RTC #300600 | 9/15/10 |
| Comment: | ||
| Installs at beacon assembly. |
Surge Protector Polyphaser
| Notes | Manufacturer | Catalog Number | Approval Date | Photos |
| RTC Manufacturing, Inc. | #IS-50NX-C2 | 9/15/10 |
| Comment: | ||
| Installs at traffic signal cabinet |
Time Switch
| Notes | Manufacturer | Catalog Number | Approval Date | Photos |
| RTC Manufacturing, Inc. | RTC AP-22 #503644 | 9/15/10 | Front View End View |
| Comment: | ||
| Installs at beacon assembly. Includes antenna and CPC Harness |
Yellow Ball LED
| Notes | Manufacturer | Catalog Number | Approval Date | Photos |
| DiaLight | DuraLED 433-3230-901XL | 4/30/10 | ||
| GelCore | DR6-YTFB-23B | 5/5/03 |
| Comment: | ||
| 12-volt power requirement |
Vehicular Signal Head
| Notes | Manufacturer | Catalog Number | Approval Date | Photos |
| Automatic Signal / Eagle Signal | SA101A1111YBB – 1 Section | 5/5/03 |
Side-of-Pole Bracket
| Notes | Manufacturer | Catalog Number | Approval Date | Photos |
| Gades Sales | UKS-1452Y / PDM-405 | 5/5/03 |
Solar Panel
| Notes | Manufacturer | Catalog Number | Approval Date | Photos |
| RTC Manufacturing, Inc. | Solar Panel | 5/5/03 |
| Comment: | ||
| 80 Watt w/ mounting brackets |
Solar Flasher Panel
| Notes | Manufacturer | Catalog Number | Approval Date | Photos |
| RTC Manufacturing, Inc. | 502598TFA | 5/5/03 |
| Comment: | ||
| “L” Panel |
Flasher
| Notes | Manufacturer | Catalog Number | Approval Date | Photos |
| RTC Manufacturing, Inc. | DC2F | 5/5/03 |
| Comment: | ||
| 12-Volt, Solid State, w/ LED indicators DC 2-Circuit Flasher 8-Pin Octal Base |
Solar Cabinet
| Notes | Manufacturer | Catalog Number | Approval Date | Photos |
| RTC Manufacturing, Inc. | RTC-503568 | 5/5/03 |
Screw-In Foundation
| Notes | Manufacturer | Catalog Number | Approval Date | Photos |
| JH Botts | JHB660-912 | 1/25/15 | Isometric View |
| Comment: | ||
| For use with flashing school beacons Shaft Diameter – 6” Shaft Length – 5’-0” Plate Size – 12” square x 1” Thick Bolt Circle Diameter – 9” to 12” |
Round Pedestal Pole
| Notes | Manufacturer | Catalog Number | Approval Date | Photos |
| Gades Sales | 15’ Pedestal Pole | 5/5/03 |
|
|
Top | Return to Approved Materials | |
Sign Sheeting
Type XI Diamond Grade "Full Cube" Sheeting
| Comment: | ||
| ASTM Type XI For most signs (See City of Overland Park Standard Details) ♦ Fluorescent Yellow-Green is reserved for School Zone Signing ♦ Fluorescent is reserved for special Warning Signs ♦ Yellow shall be used for all Warning Signs unless otherwise specified |
Electronic Cuttable Film
|
|
Top | Return to Approved Materials | |
Tubular Delineators
Flush Mounted Tubular Delineator
| Comment: | ||
| Maintenance Use Special Application Only DP200 Series NCHRP 350 Compliant 360 degree retro-reflectivity |
Ground Mounted Tubular Delineator
| Comment: | ||
| Maintenance Use Special Application Only FG-300 Ground Mount NCHRP 350 Compliant |