Roundabout Sign Design Guidelines

From PPM Wiki - City of Overland Park Projects and Procedures Manual Pages
Jump to navigation Jump to search

City Guidelines Regarding the Installation of Signs at Roundabouts
Traffic Services Division of the Department of Public Works

Governing Document Reference:

Manual on Uniform Traffic Control Devices for Streets and Highways (MUTCD), 2009 or latest edition, Overland Park Municipal Code (OPMC), Title 12 – Traffic, Chapter 12.04., Yield Sign Design Guidelines, Street Name Sign Design Guidelines, Object Marker Sign Design Guidelines, Keep Right Sign Design Guidelines and School Zone Sign Design Guidelines.

MUTCD Requirements:

“Yield” Signs

R1-2.png

A “Yield” (R1-2) sign shall be used to assign right-of-way at the entrance to a roundabout. “Yield” signs at roundabouts shall be used to control the approach roadways and shall not be used to control the circulatory roadway. Other than for all of the approaches to a roundabout, “Yield” signs shall not be placed on all of the approaches to an intersection.

“Roundabout Directional Arrow” Signs

Where the central island of a roundabout allows for the installation of signs, “Roundabout Directional Arrow” (R6-4 or R6-4a) signs should be used in the central island to direct traffic counter-clockwise around the central island. “Roundabout Directional Arrow” signs shall be used only at roundabouts and other circular intersections.

R6-4 & R6-4a.JPG

When used on the central island of a roundabout, the mounting height of a “Roundabout Directional Arrow” sign should be at least 4 feet, measured vertically from the bottom of the sign to the elevation of the near edge of the traveled way. More than one “Roundabout Directional Arrow” sign may be used facing high-speed approaches, facing approaches with limited visibility, or in other circumstances as determined by engineering judgment where increased sign visibility would be appropriate.

“Roundabout Circulation” Plaque

Where the central island of a roundabout does not provide a reasonable place to install a sign, “Roundabout Circulation” (R6-5P) plaques should be placed below the “Yield” signs on each approach. At roundabouts where “Roundabout Directional Arrow” signs and/or “One Way” signs have been installed in the central island, “Roundabout Circulation” plaques may be placed below the “Yield” signs on approaches to roundabouts to supplement the central island signs. The “Roundabout Circulation” plaque may be used at any type of circular intersection.

R6-5p.JPG



“Intersection Lane Use Control” Signs for Roundabouts

“Intersection Lane Control” signs, if used, shall require road users in certain lanes to turn, shall permit turns from a lane where such turns would otherwise not be permitted, shall require a road user to stay in the same lane and proceed straight through an intersection, or shall indicate permitted movements from a lane.

At multi-lane roundabouts, “Intersection Lane Control” (R3-8 series) signs may display any of the arrow symbol options shown below. The signs should be specific to the geometry of each multi-lane roundabout. Fish hook signs shall be used and the word ONLY should be used where a lane has one allowed movement.

Roundabout Lane Use.JPG


R3-8 Roundabout.jpg
R3-8 Roundabout ONLY.JPG











The sign shall indicate only the single vehicle movement that is required from the lane and shall be located in advance of the intersection, such as near the upstream end of the mandatory movement lane, and/or at the intersection where the regulation applies.








“Pedestrian Crossing” Signs

W11-2.JPG

“Pedestrian Crossing” (W11-2) signs may be used to alert road users in advance of locations where unexpected pedestrian entries into the roadway might occur or where shared use of the roadway by pedestrians might occur. These conflicts may be relatively confined, or might occur randomly over a segment of roadway.

W16-7p.JPG

If a post-mounted sign is placed at the location of the crossing point where pedestrians might be crossing the roadway, a diagonal downward pointing arrow (W16-7P) plaque shall be mounted below the sign.

“School Crossing” Signs

See School Zone Sign Design Guidelines.

“Circular Intersection Symbol” Signs

W2-6.JPG

“Circular Intersection Symbol” (W2-6) signs may be installed in advance of a circular intersection. If an approach to a roundabout has a statutory or posted speed limit of 40 mph or higher, the “Circular Intersection Symbol” (W2-6) sign should be installed in advance of the circular intersection.

“Advisory Speed” Plaque

W13-1P.JPG

The “Advisory Speed” (W13-1P) plaque may be used to supplement any warning sign to indicate the advisory speed for a condition.

City of Overland Park Guidelines for Installation:

"Yield" Signs

“Yield” (R1-2) signs should be installed on the right hand side of the intersection approach. Yield signs are not required in the splitter islands on the left hand side of the approach except for multi-lane roundabouts. For multi-lane roundabouts, an additional yield sign will also be installed in the splitter island on the left hand side of the approach.

"Street Name" Signs

“Street Name” (D3-1) signs should be installed on the left hand side of the splitter island visible to traffic exiting from the roundabout. Two signs, consisting of the same street name, should be mounted back to back.

"Roundabout Directional Arrow" Signs

“Roundabout Directional Arrow” (R6-4 or R6-4a) signs should be installed within the central island of the roundabout directly in front of the approach lane. The sign should consist of two or three black chevrons on white background. The R6-4 sign should be used for one-lane roundabouts with single approach lanes and on the single lane approaches to a two-lane roundabout. The R6-4a sign should be used for two-lane roundabouts with two approach lanes.

Where the central island of a roundabout does not provide a reasonable place to install a sign, Roundabout Circulation (R6-5P) plaques should be placed below the yield signs on each approach.

"Pedestrian Crossing" Signs

“Pedestrian Crossing” (W11-2) signs should be installed as appropriate at crosswalks within the limits of a roundabout. The signs should be installed both at the approach and departure points near the crosswalk location.

“School Crossing” Signs

“School Crossing” (S1-1) signs should be considered in conjunction with established City of Overland Park school crosswalk signing and pavement marking criteria. See School Zone Sign Design Guidelines.

"Circular Intersection" Signs and "Speed Advisory" Plaques

“Circular Intersection” (W2-6) signs with an “Advisory Speed” (W13-1) plaque should always be installed in advance of each approach to the roundabout.

"Lane Use Control" Signs

“Lane Control Use” (R3-8 Series) signs should be installed in advance of all multi-lane roundabouts to indicate the allowable turning movements from each lane of the roundabout.

Signs that are Not Required to be Installed at Roundabouts

“One-Way” (R6-1) signs shall not be installed within the central island of the roundabout.

“Type I Object Marker” (OM1-3) signs are not required to be installed on the approach or departure noses of splitter islands.

“Keep Right” (R4-7) signs are not required to be installed on the approach or departure noses of splitter islands.

Sign Standards:

"Yield" Signs

The standard size of the “Yield” (R1-2) sign will be 36” x 36” x 36” when facing traffic on a single lane approach and 48” x 48” x 48” when facing traffic on a multi-lane approach. It shall be a downward-pointing equilateral triangle with a wide red border and the legend YIELD in red on a white retro-reflectorized background.

“Roundabout Directional Arrow” Signs

The “Roundabout Directional Arrow” (R6-4) sign shall be a 30” x 24” horizontal rectangle with two black chevron symbols pointing to the right on a white retro-reflectorized background. The (R6-4a) sign shall be a 48” x 24” horizontal rectangle with three black chevron symbols pointing to the right on a white retro-reflectorized background. No border shall be used on the “Roundabout Directional Arrow” signs.

“Roundabout Circulation” Plaque

The “Roundabout Circulation” (R6-5P) plaque shall be a 30” x 30” sign with black circulating arrows and a black border on a white retro-reflectorized background.

“Intersection Lane Use Control” Signs for Roundabouts

“Intersection Lane Use Control” (R3-8 Series) signs for roundabouts shall 30” high x variable width depending on the lane configuration. It shall have a black legend and border on a white retro-reflectorized background.

“Pedestrian Crossing” Signs

“Pedestrian Crossing (W11-2) signs shall be 30” x 30” on the approaches and exits at single lane roundabouts and 36” x 36” on the approaches and exits at double lane roundabouts. The “Diagonal Arrow” (W16-7P) plaque shall be 24” x 12”. Both signs shall have a black legend and border on a retro-reflectorized yellow background.

“School Crossing” Signs

See City Guidelines for the Installation of School Crossing signs. See School Zone Sign Design Guidelines.

“Circular Intersection Symbol” Signs

“Circular Intersection Symbol” (W2-6) signs shall be 30” x 30” and shall have a black legend and border on a retro-reflectorized yellow background.

“Advisory Speed” Plaque

“Advisory Speed” (W13-1P) plaques shall be 18” x 18” and shall have a black legend and border on a retro-reflectorized yellow background.

"Street Name" Sign

See Street Name Sign Design Guidelines.