Approved Materials - Streetlighting

From PPM Wiki - City of Overland Park Projects and Procedures Manual Pages
Jump to navigation Jump to search

Return to Complete Preapproved Materials Page


GeekNotesIcon.png Note: This document is provided as a benefit to contractors and suppliers who are bidding projects for the City of Overland Park. Only products identified on this list will be approved for installation on City construction projects. This list shall not be used as a substitute for catalog cuts or material approval. All material approvals shall be submitted on the approved City of Overland Park Contract Project Submittal form. The form is available at City Hall by contacting Bruce Wacker at (913) 895-6027. Failure to comply will be cause for rejection of materials until proper submittals are received. This list is updated periodically. The contractor or supplier shall contact the City of Overland Park to make sure that they have the most current list prior to bidding a project. Failure to do so shall not constitute a legitimate claim for change orders. Before accessing any links, the City recommends that the user delete browsing history to insure the latest catalog cut information is displayed correctly.

Contractor Submittal Form

Breakaway Pole Devices

Break-away Couplings and Bases

Notes Manufacturer Catalog Number Approval Date Photos
Precision Form, Inc. PFI-200-1A Breakaway Couplings 5/5/03
Akron Foundries, Inc. / Hapco AASHTO No. TB6-9”–10 ½” to 12½” Bolt Circle
Dwg # A79402 – 4/4/98
AASHTO No. TB5-9”–14 ½” to 15¼” Bolt Circle
Dwg # A79236 – 1/4/00
8/15/03
Akron Foundries, Inc. / Valmont CS-300 – Up to 12” Bolt Circle AASHTO No. TB6-9
Dwg # KS-90 – 5/14/03
CS-370 – 14 ½” to 15” Bolt Circle AASHTO No. TB5-9
Dwg # KS-91 w/ Rev 1
6/20/03

Up arrow 66x80.png Top Return to Approved Materials
Side arrow 80x66.png

Cable

Ground Wire

Notes Manufacturer Catalog Number Approval Date Photos
Cerro Wire & Cable Co, Inc. Product Number
050-2200 or 050-2215
5/5/03
Encore Wire LTD Bare No. 6 AWG 8/1/03
Essex Electrical Products Product Number 060062C 8/21/03
Senator / Southwire Bare No. 6 AWG 5/5/03
Service Wire Co Bare-CU-SD-6-7SOL 5/7/02
Comment:
Soft Drawn Bare Solid Copper #6 AWG

Distribution Cable

Notes Manufacturer Catalog Number Approval Date Photos
Member of The Marmon Group of Companies Aetna Insulated Wire Co. UL file # E63541 2/21/05
Alan Wire Product Number 04USE11 – 500’
UL file #E319493
1/30/12
Member of The Marmon Group of Companies Cerro Wire & Cable Co, Inc. UL file # E11098 5/5/03
Draka Cableteq Product Number 388932 7/8/09
Encore Wire LTD UL file # E174428 8/1/03
Essex Electrical Products Product Number 0800410
UL file # E11134
2/1/01
Kris Tech Wire Co, Inc. 0407-RHW/USE-BK
UL file # E207249
11/24/03
Senator / Southwire Co 11-32-72
UL file # E32071
5/5/03
Service Wire Co UL file # E105667 5/7/02
Comment:
No. 4 AWG USE Copper
Black insulation
Single cable, not three cables twisted on the reel

Up arrow 66x80.png Top Return to Approved Materials
Side arrow 80x66.png

Pole Cable

Notes Manufacturer Catalog Number Approval Date Photos
Cerro Wire & Cable Co, Inc. Black – 112-3801
Red – 112-3803
Green – 112-3805
UL file # E15119
5/5/03
Encore Wire LTD UL file # E123774 8/1/03
Purchased by Southwire Co. 9/5/2001 Essex Electrical Products Product Number 070101
UL file # E14656
2/1/01
Senator / Southwire Co. Red – 22-97-57
Black – 22-97-32
Green – 22-97-xx
UL file # E23919
5/5/03
United Copper Industries Black – 325370 (500’ reel)
Red – 325372 (500’ reel)
Green – 325379 (500’ reel)

Black – 325573 (2,500’ reel)
Red – 325574 (2,500’ reel)
Green – 325580 (2,500’ reel)

UL file # E194031-A
5/26/09
Comment:
Stranded copper
THHN/THWN #10 AWG
Color Coded Red and Black
Green for ground cable

Up arrow 66x80.png Top Return to Approved Materials
Side arrow 80x66.png

Electrical Service Cable

Notes Manufacturer Catalog Number Approval Date Photos
Member of The Marmon Group of Companies Aetna Insulated Wire Co. UL file # E63541 2/21/05
Alan Wire Product Number 04USE11 – 500’
UL file #E319493
1/30/12
Member of The Marmon Group of Companies Cerro Wire & Cable Co, Inc. UL file # E11098 5/5/03
Draka Cableteq Product Number 388932 7/8/09
Encore Wire LTD UL file # E174428 8/1/03
Essex Electrical Products Product Number 0800410
UL file # E11134
2/1/01
Kris Tech Wire Co, Inc. 0407-RHW/USE-BK
UL file # E207249
11/24/03
Senator / Southwire Co 11-32-72
UL file # E32071
5/5/03
Service Wire Co UL file # E105667 5/7/02
Comment:
No. 4 AWG USE Copper
Black insulation
Single cable, not three cables twisted on the reel

Up arrow 66x80.png Top Return to Approved Materials
Side arrow 80x66.png

Conduit and Fittings

PVC Conduit

Notes Manufacturer Catalog Number Approval Date Photos
Cantex 1” – A52BA12
2” – A52CA12
5/5/03
Certain Teed 1” – 27213
1 ½” – 27413
2” – 27513
3” – 27713
4” – 27913
5/5/03
Heritage Plastics 1” – 511010 – 10’ or 511020 – 20’
1 ½” – 511510 – 10’ or 511520 – 20’
2” – 512010 – 10’ or 512020 – 20’
3” – 513010 – 10’ or 513020– 20’
4” – 514010 – 10’ or 515020 – 20’
7/24/12
IPEX / PW Eagle 1” – 032410 – 10’or 032411 – 20’
2” – 032420 – 10’ or 032421 – 20’
3” – 032430 – 10’ or 032431 – 20’
4” – 032440 – 10’ or 032441 – 20’
12/22/05
Prime Conduit 1” – 49008-010 (10’ length)
1” – 49008-020 (20’ length)
2” – 49011-010 (10’ length)
2” – 40911-020 (20’ length)
3” – 49013-010 (10’ length)
3” – 49013-020 (20’ length)
5/26/09
Rocky Mountain Colby Pipe 2” – 502010U – 10’ or 502020U – 20’
3” – 503010U – 10’ or 503020U – 20’
4” – 504010U – 10’ or 504020U – 20’
4/7/09
Comment:

Schedule 40 PVC


Up arrow 66x80.png Top Return to Approved Materials
Side arrow 80x66.png

PVC Fittings

Notes Manufacturer Catalog Number Approval Date Photos
Cantex Standard Couplings:
 1” – 6141625
 2” – 6141628
90º Elbows 36” Radius for Power:(Plain End / Belled End)
 3” – 5133820 / 5233930
90º Elbows:(Plain End/Belled End)
 1” – 5133825 / 5233825
 2” – 5133828 / 5233828
45º Elbows:(Plain End/Belled End)
 1” – 5133765 / 5233765
 2” – 5133768 / 5233768
30º Elbows:(Plain End/Belled End)
 1” – 5133745 / 5233745
 2” – 5133748 / 5233748
5/5/03
Heritage Plastics Standard Couplings:
 1” – 610002
 2” – 610005
90º Elbows 36” Radius for Power: (Plain End / Belled End)
 3” – 611392 / 611142
90º Elbows: (Plain End / Belled End)
 1” – 611002 / 611058
 2” – 611005 / 611061
45º Elbows: (Plain End / Belled End)
 1” – 611016 / 611071
 2” – 611019 / 611074
30º Elbows: (Plain End / Belled End)
 1” – 611030 / 611085
 2” – 611033 / 611088
7/24/12
IPEX / PW Eagle Standard Couplings:
 1” – EC20 / 077003
 2” – EC35 / 077006
90º Elbows 36” Radius for Power: (Plain End / Belled End)
 3” – 068767 / 068058
90º Elbows: (Plain End / Belled End)
 1” – 068582 / 068422
 2” – 068585 / 068425
45º Elbows: (Plain End / Belled End)
 1” – 068602 / 068563
 2” – 068605 / 068566
30º Elbows: (Plain End / Belled End)
 1” – 068622 / EE2030
 2” – 068625 / EE3530
12/22/05
Plastic Trends / Royal Pipe Systems Standard Couplings:
 1” – E010100
 2” – E010200
90º Elbows 36” Radius for Power: (Plain End / Belled End)
 3” – E07530036 / E07930036
90º Elbows: (Plain End / Belled End)
1” – E018100 / E021100
2” – E018200 / E021200
45º Elbows: (Plain End / Belled End)
 1” – E019100 / E022100
 2” – E019200 / E022200
30º Elbows: (Plain End / Belled End)
 1” – E020100 / E072100
 2” – E020200 / E072200
1/8/10
Formerly Carlon Prime Conduit Standard Couplings:
 1” – E940F
 2” – E940J
90º Elbows 36” Radius for Power: (Plain End / Belled End)
 3” – UA9FL / UA9FLB
90º Elbows: (Plain End / Belled End)
 1” – UA9AF / UA9AFB
 2” – UA9AJ / UA9AJB
45º Elbows: (Plain End / Belled End)
 1” – UA7AF / UA7AFB
 2” – UA7AJ / UA7AJB
30º Elbows: (Plain End / Belled End)
 1” – UA6AF / UA6AFB
 2” – UA6AJ / UA6AJB
5/26/03
Comment:
Schedule 40 PVC

Up arrow 66x80.png Top Return to Approved Materials
Side arrow 80x66.png

HDPE Conduit

Notes Manufacturer Catalog Number Approval Date Photos
Dura-Line now owns Arnco, Boreflex, Carlon and Lamson Pipe Dura-Line 2” – 2SDR135GRY
3” – 3SDR135GRY
3/28/13
Comment:
SDR 13.5 all sizes
Gray color
Smooth outside wall
UV Stabilized

HDPE Service Conduit

Notes Manufacturer Catalog Number Approval Date Photos
Dura-Line now owns Arnco, Boreflex, Carlon and Lamson Pipe Dura-Line 2” – 2SDR135BLK/RED
3” – 3SDR135BLK/RED
3/8/13
Comment:
SDR 13.5 Black with red stripes
Smooth outside wall
UV Stabilized

Up arrow 66x80.png Top Return to Approved Materials
Side arrow 80x66.png

HDPE Couplings

Notes Manufacturer Catalog Number Approval Date Photos
American Ploywater Bonduit Conduit Adhesive
Use only with Cantex Sch 40 PVC Longline Couplings:
2” – 6202000
3” - 6202005
10/11/10
Cabletec AS 2.375 – 2”
AS 3.500 – 3”
8/2/01
Central Plastics Company Electrofusion Couplings
2” IPS 575-0042
3” IPS 575-0043
5/5/06
Dura-Line PushLock Couplings
1-908353 – 2”
10/5/10
Tyco Electronics / Jackmoon Moon-Link Transparent Duct Coupling
2” – 20TC238SP
3” – 30TC350SP
12/23/02
Unitex Pro-Poly CA Adhesive
Use only with Cantex Sch 40 PVC Longline Couplings:
2” – 6202000
3” – 6202005
1/9/06

Connector Kits, Fuse Holders and Fuses

Multi-tap Connectors

Notes Manufacturer Catalog Number Approval Date Photos Comments
Purchased by Hubbell Connector MFG.Co. CMC SLK-112 I 1/11/01 6061-T6 aluminum
Provide rubber boot cover – black plastisol
Durham Company 9205159 8/22/13
Fargo Mfg. Company, Inc subsidiary of Hubbell Inc. Fargo GO-32 5/5/03
Polaris SLCS4A-4P 9/21/07 Coated w/ allen head screw – does not need rubber boot

Up arrow 66x80.png Top Return to Approved Materials
Side arrow 80x66.png

Un-Fused Fuse Holders

Notes Manufacturer Catalog Number Approval Date Photos
Ideal Industries purchased Buchanan Ideal Industries / Buchanan / Elastimold Style 20 U Breakaway 5/5/03
Comment:
Single pole in-line non-fused
600 volt, 30 amp
Copper
#10 AWG conductor size

Fused Fuse Holders

Notes Manufacturer Catalog Number Approval Date Photos
Ideal purchased Buchanan Ideal Industries / Buchanan / Elastimold Style 65 U Breakaway 5/5/03
Comment:
Single pole in-line fused
600 volt, 8 amp
Copper
#10 AWG conductor size

Fuses

Notes Manufacturer Catalog Number Approval Date Photos
Bussmann Circuit Protection, Worldwide Limitron Type KTK8 5/5/03
Ferraz Shawmut ATM-8 1/25/02
Littelfuse KLK-8 7/31/01
Comment:
600 volt, 8 amp

Up arrow 66x80.png Top Return to Approved Materials
Side arrow 80x66.png

Splice Kits

Notes Manufacturer Catalog Number Approval Date Photos Comments
Burndy Split-Bolt Connectors
KS15 - #10 STR to #8 STR
KS20 - #8 STR to #4 STR
KS22 - #6 STR to #3 STR
KS23 - #6 STR to #2 STR
KS25 - #4 STR to #1/0 STR

Copper Compression Tees
YST4C4C - #4 STR to #4 STR
5/5/03
NSI Industries Polaris Blue ISW-4 - #4 two-port in-line splice
ITW-4 - #4 two port
IPLW4-3 - #4 three port
IPLW4-3 - #4 four port
9/11/07 Waterproof/submersible

Control Centers

Control Centers (Four-Circuit)

Notes Manufacturer Catalog Number Approval Date Photos
Milbank CP3B91115PAOOP4 4/8/11
Myers Electric Products, Inc. MEUG16AR-M100-OPK 7/24/12
Purchased by Myers 12/10/12 Pacific Utility Products USP16R-M2100-112C-AL-OPK 2/3/11
Comment:
Ringless meter cover with horn bypass and exposed meter

Control Centers (Single-Circuit)

Notes Manufacturer Catalog Number Approval Date Photos
Milbank Pending approval
Myers Electric Products, Inc. MET2-VLM-LTS-R 7/24/12
Purchased by Myers 12/10/12 Pacific Utility Products USP2R-100-112C-OPK-LT-PM 2/17/12
Comment:
Ringless meter cover and horn bypass with mounting collar for stand alone unit.

Up arrow 66x80.png Top Return to Approved Materials
Side arrow 80x66.png

Grounding Equipment

Ground Rod

Notes Manufacturer Catalog Number Approval Date Photos
Chance/Hubbell Cat No. C611300 4/24/12
Erico Inc. / Eritech Cat. No. 611300 – ½” x 10’
Cat. No. 613400 – ¾” x 10’
2/27/02
ITTBlackburn Cat. No. 5010 5/5/03
Joslyn Cat No. J-8330 5/5/03
Knight GRC 1210 5/5/03
Comment:
½” x 10’-0” long
Copper clad steel core
UL listed

Ground Rod Clamp

Notes Manufacturer Catalog Number Approval Date Photos
Burndy GRC 12 – ½”
GRC34 – ¾”
2/27/02
Erico Inc. / Eritech Part No. HDC12 – ½”
Part No. HDC34 – ¾”
12/1/05
ITT Blackburn Type JAB-12H 5/5/03
Comment:
Hex head set screw
Copper alloy
Long bearing surface
UL listed

Up arrow 66x80.png Top Return to Approved Materials
Side arrow 80x66.png

Junction and Service Boxes

Type I Junction Box

Notes Manufacturer Catalog Number Approval Date Photos
Armorcast A6001423TA (12” x 12” x 12”) 1/11/01
CDR SB33-1212-12 – Box only
SC30-1212-02 – Cover only
SA33-1212-12 – Assembly
5/19/95
Highline PHB121212 – Box only
CHC1212SL – Cover only
PHA121212SL2 – Assembly
3/3/11
Martin Enterprises 121212PCB – Box only
1212PCC – Cover only
121212PC – Assembly
10/17/11
New Basis PCB121212A04 – Box only
PCC121212A04 – Cover only
PCA121212A4009 – Assembly
2/26/02
Carson Series H boxes were purchased by Oldcastle Oldcastle 12122001 – Box only
12124006– Cover only
12121003 w/ 12124006 “Street Lighting” – Assembly
80002052 hex head bolts if separate
8/29/13
Quazite PC1212BA12 – Box only
PC1212CA0041 – Cover only
5/5/03
Comment:
Logo to read “Street Lighting”
Cover to be ¾” thick (CDR is 1 ½” thick)
Straight wall
No mouseholes
3/8” – 16 NC hex head bolts and washers

Up arrow 66x80.png Top Return to Approved Materials
Side arrow 80x66.png

Type II Junction Box

Notes Manufacturer Catalog Number Approval Date Photos
Armorcast A6001429TA (11”x18”x12”) 7/30/01
CDR SB33-1118-12 – Box only
SC30-1118-02 – Cover only
SA33-1118-12 – Assembly
5/19/95
Highline PHB111812 – Box only
CHC1118SL – Cover only
PHA111812SL2 – Assembly
3/3/11
Martin Enterprises 111812PCB – Box only
1118PCC – Cover only
111812PC – Assembly
10/17/11
New Basis PCB111812A04 – Box only
PCC111812A04 – Cover only
PCA111812A866 – Assembly
2/26/02
Carson Series H boxes were purchased by Oldcastle Oldcastle 11182001 – Box only
11184007 – Cover only
11181617 – Assembly
80002033 hex head bolts if separate
8/29/13
Quazite PG1118BA12 – Box only
PG1118CA0041 – Cover only
5/5/03
Comment:
Logo to read “Street Lighting”
Cover to be 1 ¾” to 2” thick
Straight wall
No mouseholes
3/8” – 16 NC hex head bolts and washers

Up arrow 66x80.png Top Return to Approved Materials
Side arrow 80x66.png

Lamps

High Pressure Sodium

Notes Manufacturer Catalog Number Approval Date Photos
General Electric Lucalox – HPS lamps
100 W – LU100/ECO/NC – 14673
150 W – LU150/55/ECO/NC – 40390
250 W – LU250/ECO/NC – 14674
400 W – LU400/ECO/NC – 14675
11/4/10
Phillips 100 W – C100S54/ALTO/NC – 14740-5
150 W – C150S55/ALTO/NC – 14741-3
250 W – C250S50/ALTO/NC – 14742-1
400 W – C400S51/ALTO/NC – 14743-9
10/14/11
Sylvania Lumalux PLUS/ECO – HPS lamps
100 W – LU100/PLUS/ECO – 67559
150 W – LU150/55/PLUS/ECO – 67494
250 W – LU250/PLUS/ECO – 67572
400 W – LU400/PLUS/ECO – 67312
3/26/08
Comment:
Clear lamp
Mogul base
ECO/ALTO = Low Mercury
NC = Non Cycling
30,000+ Hour Average Life

Up arrow 66x80.png Top Return to Approved Materials
Side arrow 80x66.png

Luminaires

Cobra-Head Luminaire

Notes Manufacturer Catalog Number Approval Date Photos
Photometric Curves
150:AE7361-70fg3.ies
250 & 400: AEL12963.ies
American Electric Lighting –
Acuity Brands
31515SCAMT2R3FGM2NRHPAR8663 – 150W HPS
32525SCAMT2R3FGNRHPAR8037 – 250W HPS
32540SCAMT2R3FGNRHPAR8037 – 400W HPS
4/28/05
4/15/05
Photometric Curves
150: GE7285.ies
250 & 400: GE1002.ies or GE7323.ies
General Electric M2AC15S0A1GMC31347 – 150W HPS
MDCA25S0A12FMC31 – 250W HPS
MDCA40S0A12FMC31 – 400W HPS
5/5/03
150 & 250: HP03116.ies
400: HP03065.ies
Hubbell RMCD15S38031125F0M53-150W
RMCD25S38031125F0M53-250W
RLCD40S38031125F0M53-400 W
5/5/03
Comment:
2-Bolt slip fitter connection for 150 W fixtures
4-Bolt slip fitter connection large housing for 250 W and 400 W fixtures
Multi-Tap Ballast
Plug-In “Protected” starter
Aluminum wildlife guard
NO PHOTOCELL

Highway Luminaire

Notes Manufacturer Catalog Number Approval Date Photos
Photometric Curve 400W: 452580.ies General Electric RPFT40S0A1GLN4GR – 400W HPS 5/5/03

Up arrow 66x80.png Top Return to Approved Materials
Side arrow 80x66.png

Residential Post Top

Notes Manufacturer Catalog Number Approval Date Photos
Photometric Curves
100 & 150 W: 42737
Holophane PTU-10DHP-MT-B-P3-B-P – 100 W
PTU-15DHP-MT-B-P3-B-P – 150 W
2/14/03
Photometric Curves
mpb15s3a – Type 3
mpb15sa – Type 5
Sentry SLH-100HPS-240MT-BLAF –Type 3
SLH-150HPS-240MT-BLAF –Type 3
SLH-100HPS-240MT-BLSF –Type 5
5/5/03
Comment:
Multi-Tap Ballast

Photocell

System Photocell

Notes Manufacturer Catalog Number Approval Date Photos
Dark To Light (DTL) DP124-0.2-1821 3/27/13
Comment:
120Volt, Turn on at 0.2 Fc
Silicon Chip

Up arrow 66x80.png Top Return to Approved Materials
Side arrow 80x66.png

Poles

Aluminum Poles 30' Mounting Heights

Notes Manufacturer Catalog Number Approval Date Photos
Hapco 27’-6” Poles:
Dwg # B84165-001 – Type OP301 w/single 6’ arm – 10/04 Rev 1
Dwg # B84165-002 – Type OP301 w/single 8’ arm – 10/04 Rev 1
Dwg # B79636-001 – Type OP302 w/single 12’ arm – 10/04 Rev 2
Dwg # B84165-003 – Type OP303 w/twin single member 8’ arms – 10/04 Rev 1
Dwg # B79636-005 – w/twin 8’ truss arms – 10/04 Rev 2
Identification Label:
Dwg # B84166 9-3-03
11/1/04
Valmont 27’-6” Poles:
Dwg # KS-71 – Type OP301 w/Rev 2
Dwg # KS-72 – Type OP302 w/Rev 2
Dwg # KS-73 – Type OP303 w/Rev 2
Handholes:
Dwg # KS-86 – Type OP301 w/Rev 2
Dwg # KS-86 – Type OP302 w/Rev 2
Dwg # KS-87 – Type OP303
Identification Label:
Dwg # KS-89 and KS-89A
9/13/05
Comment:
J-hook at top of pole
Handhole cover keeper chain attached to bottom of handhole opening or Hinged handhole option
Grounding screw shaft installed parallel to pole shaft at back side of pole.
Labeled with manufacturer identification tag.
0.188” Wall Thickness
Cable hook at top of pole

Aluminum Poles 40' Mounting Heights

Notes Manufacturer Catalog Number Approval Date Photos
Hapco 37’-6” Poles:
Dwg # 84165-004 – Type OP401 w/single 6’ arm – 10/04 Rev 1
Dwg # 84165-005 – Type OP401 w/single 8’ arm – 10/04 Rev 1
Dwg # B79636-002 – Type OP402 w/single 10’ arm – 10/04 Rev 2
Dwg # B79636-003 – Type OP402 w/single 12’ arm – 10/04 Rev 2
Dwg # B79636-004 – Type OP402 w/single 15’ arm – 10/04 Rev 2
Dwg # 80061-001 Type OP403 w/twin 12’ & 8’ arms – 10/04 Rev 3
Dwg # 80061-002 Type OP403 w/twin 12’ arms – 10/04 Rev 3
Dwg # 80061-003 Type OP403 w/twin 15’ arms – 10/04 Rev 3
Dwg # 80061-004 Type OP403 w/twin 10’ arms – 10/04 Rev 3
Identification Label:
Dwg # B84166 9-3-03
11/1/04
Valmont 37’-6” Poles:
Dwg # KS-74 – Type OP401w/Rev 2
Dwg # KS-75 – Type OP402 w/Rev 3
Dwg # KS-76 – Type OP403 w/Rev 3
Handholes:
Dwg # KS-87 – Type OP401 w/Rev 2
Dwg # KS-87 – Type OP402 w/Rev 2
Dwg # KS-88 – Type OP403 w/Rev 1
Identification Label:
Dwg # KS-89 & KS-89A
9/13/05
Comment:
J-hook at top of pole
Handhole cover keeper chain attached to bottom of handhole opening or Hinged handhole option
Grounding screw shaft installed parallel to pole shaft at back side of pole.
Labeled with manufacturer identification tag.
0.219” Wall Thickness

Aluminum Street Light Bracket Arms

Notes Manufacturer Catalog Number Approval Date Photos
Hapco Information Contained on Pole Drawings. 9/3/03
Valmont Arms:
Dwg # KS-77 – 6’ Single – 5/14/03
Dwg # KS-78 – 8’ Single – 5/14/03
Dwg # KS-79 – 8’ Truss – 5/14/03
Dwg # KS-80 – 10’ Truss – 5/14/03
Dwg # KS-81 – 12’ Truss – 5/14/03
Dwg # KS-82 – 15’ Truss – 5/14/03
Arm Attachment:
Dwg # KS-83 – Single w/Rev 1
Dwg # KS-84 – Truss w/Rev 1
11/29/04
Comment:
Supply end cap on lower truss member.
Labeled with identification tag.

Aluminum Poles 14' Mounting Heights

Notes Manufacturer Catalog Number Approval Date Photos
Hapco Dwg # A66338 w/Rev # 10 – 4/08 4/23/08
Valmont Dwg # KS-70 – Type OP14 w/Rev 5
Dwg # KS-85 – Handhole w/Rev 1
Dwg # KS-89 – ID Detail
4/23/08
Comment:
Handhole cover keeper chain attached to bottom of handhole opening.
Handhole should be smooth and free of burrs.
Grounding screw shaft installed parallel to pole shaft at back side of pole.
Labeled with manufacturer identification tag.
0.156” Wall Thickness

Screw-In Pole Foundations

Notes Manufacturer Catalog Number Approval Date Photos
AB Chance T112-0363 – R OP14
T112-0748 – T1 OP301/302/303
T112-02930101 – F1 OP401/402
T112-02940101 – F2 OP403
2/20/06
Dixie D-1202-0029-A – R OP14
D-1202-0465-A – T1 OP301/302/303
D-1202-0031-A – F1 OP401/402
D-1202-0032-A – F2 OP403
4/10/13
Earth Contact Products LPS-66T-048-12 – R OP14
LPS-66T-060-12 – T1 OP301/302/303
LPS-86T-60A-14 – F1 OP401/402
LPS-86T-60B-14 – F2 OP403
10/15/12
JH Botts, Inc. Dwg # JHBOPK-1 w/Rev A 8/20/03
Pelco SK-1094-1 Rev C – R OP14
SK-1109-1 Rev B – T1 OP301/302/303
SK-1108-1 Rev B – F1 OP401/402
SK-1095-1 Rev E – F2 OP403
7/19/06
Comment:
Manufacturer and foundation identification stenciled on base plate with ¼” to ½” lettering.