Difference between revisions of "Approved Materials - Streetlighting"
Jump to navigation
Jump to search
Bruce Wacker (talk | contribs) |
Bruce Wacker (talk | contribs) |
||
| Line 773: | Line 773: | ||
|- | |- | ||
| | | | ||
|Martin Enterprises | |[http://www.martinfrp.com Martin Enterprises] | ||
|111812PCB – Box only<br>1118PCC – Cover only<br>111812PC – Assembly | |111812PCB – Box only<br>1118PCC – Cover only<br>111812PC – Assembly | ||
|10/17/11 | |10/17/11 | ||
Revision as of 09:37, 29 October 2013
Return to Complete Preapproved Materials Page
 |
Note: This document is provided as a benefit to contractors and suppliers who are bidding projects for the City of Overland Park. Only products identified on this list will be approved for installation on City construction projects. This list shall not be used as a substitute for catalog cuts or material approval. All material approvals shall be submitted on the approved City of Overland Park Contract Project Submittal form. The form is available at City Hall by contacting Bruce Wacker at (913) 895-6027. Failure to comply will be cause for rejection of materials until proper submittals are received. This list is updated periodically. The contractor or supplier shall contact the City of Overland Park to make sure that they have the most current list prior to bidding a project. Failure to do so shall not constitute a legitimate claim for change orders. Before accessing any links, the City recommends that the user delete browsing history to insure the latest catalog cut information is displayed correctly. |
Breakaway Pole Devices
Break-away Couplings and Bases
| Notes | Manufacturer | Catalog Number | Approval Date | Photos |
| Precision Form, Inc. | PFI-200-1A Breakaway Couplings | 5/5/03 | ||
| Akron Foundries, Inc. / Hapco | AASHTO No. TB6-9”–10 ½” to 12½” Bolt Circle Dwg # A79402 – 4/4/98 AASHTO No. TB5-9”–14 ½” to 15¼” Bolt Circle Dwg # A79236 – 1/4/00 |
8/15/03 | ||
| Akron Foundries, Inc. / Valmont | CS-300 – Up to 12” Bolt Circle AASHTO No. TB6-9 Dwg # KS-90 – 5/14/03 CS-370 – 14 ½” to 15” Bolt Circle AASHTO No. TB5-9 Dwg # KS-91 w/ Rev 1 |
6/20/03 |
|
Top | Return to Approved Materials |  |
Cable
Ground Wire
| Notes | Manufacturer | Catalog Number | Approval Date | Photos |
| Cerro Wire & Cable Co, Inc. | Product Number 050-2200 or 050-2215 |
5/5/03 | ||
| Encore Wire LTD | Bare No. 6 AWG | 8/1/03 | ||
| Essex Electrical Products | Product Number 060062C | 8/21/03 | ||
| Senator / Southwire | Bare No. 6 AWG | 5/5/03 | ||
| Service Wire Co | Bare-CU-SD-6-7SOL | 5/7/02 |
| Comment: | ||
| Soft Drawn Bare Solid Copper #6 AWG |
Distribution Cable
| Notes | Manufacturer | Catalog Number | Approval Date | Photos |
| Member of The Marmon Group of Companies | Aetna Insulated Wire Co. | UL file # E63541 | 2/21/05 | |
| Alan Wire | Product Number 04USE11 – 500’ UL file #E319493 |
1/30/12 | ||
| Member of The Marmon Group of Companies | Cerro Wire & Cable Co, Inc. | UL file # E11098 | 5/5/03 | |
| Draka Cableteq | Product Number 388932 | 7/8/09 | ||
| Encore Wire LTD | UL file # E174428 | 8/1/03 | ||
| Essex Electrical Products | Product Number 0800410 UL file # E11134 |
2/1/01 | ||
| Kris Tech Wire Co, Inc. | 0407-RHW/USE-BK UL file # E207249 |
11/24/03 | ||
| Senator / Southwire Co | 11-32-72 UL file # E32071 |
5/5/03 | ||
| Service Wire Co | UL file # E105667 | 5/7/02 |
| Comment: | ||
| No. 4 AWG USE Copper Black insulation Single cable, not three cables twisted on the reel |
|
|
Top | Return to Approved Materials | |
Pole Cable
| Notes | Manufacturer | Catalog Number | Approval Date | Photos |
| Cerro Wire & Cable Co, Inc. | Black – 112-3801 Red – 112-3803 Green – 112-3805 UL file # E15119 |
5/5/03 | ||
| Encore Wire LTD | UL file # E123774 | 8/1/03 | ||
| Purchased by Southwire Co. 9/5/2001 | Essex Electrical Products | Product Number 070101 UL file # E14656 |
2/1/01 | |
| Senator / Southwire Co. | Red – 22-97-57 Black – 22-97-32 Green – 22-97-xx UL file # E23919 |
5/5/03 | ||
| United Copper Industries | Black – 325370 (500’ reel) Red – 325372 (500’ reel) Green – 325379 (500’ reel) Black – 325573 (2,500’ reel) Red – 325574 (2,500’ reel) Green – 325580 (2,500’ reel) UL file # E194031-A |
5/26/09 |
| Comment: | ||
| Stranded copper THHN/THWN #10 AWG Color Coded Red and Black Green for ground cable |
|
|
Top | Return to Approved Materials | |
Electrical Service Cable
| Notes | Manufacturer | Catalog Number | Approval Date | Photos |
| Member of The Marmon Group of Companies | Aetna Insulated Wire Co. | UL file # E63541 | 2/21/05 | |
| Alan Wire | Product Number 04USE11 – 500’ UL file #E319493 |
1/30/12 | ||
| Member of The Marmon Group of Companies | Cerro Wire & Cable Co, Inc. | UL file # E11098 | 5/5/03 | |
| Draka Cableteq | Product Number 388932 | 7/8/09 | ||
| Encore Wire LTD | UL file # E174428 | 8/1/03 | ||
| Essex Electrical Products | Product Number 0800410 UL file # E11134 |
2/1/01 | ||
| Kris Tech Wire Co, Inc. | 0407-RHW/USE-BK UL file # E207249 |
11/24/03 | ||
| Senator / Southwire Co | 11-32-72 UL file # E32071 |
5/5/03 | ||
| Service Wire Co | UL file # E105667 | 5/7/02 |
| Comment: | ||
| No. 4 AWG USE Copper Black insulation Single cable, not three cables twisted on the reel |
|
|
Top | Return to Approved Materials | |
Conduit and Fittings
PVC Conduit
| Notes | Manufacturer | Catalog Number | Approval Date | Photos |
| Cantex | 1” – A52BA12 2” – A52CA12 |
5/5/03 | ||
| Certain Teed | 1” – 27213 1 ½” – 27413 2” – 27513 3” – 27713 4” – 27913 |
5/5/03 | ||
| Heritage Plastics | 1” – 511010 – 10’ or 511020 – 20’ 1 ½” – 511510 – 10’ or 511520 – 20’ 2” – 512010 – 10’ or 512020 – 20’ 3” – 513010 – 10’ or 513020– 20’ 4” – 514010 – 10’ or 515020 – 20’ |
7/24/12 | ||
| IPEX / PW Eagle | 1” – 032410 – 10’or 032411 – 20’ 2” – 032420 – 10’ or 032421 – 20’ 3” – 032430 – 10’ or 032431 – 20’ 4” – 032440 – 10’ or 032441 – 20’ |
12/22/05 | ||
| Prime Conduit | 1” – 49008-010 (10’ length) 1” – 49008-020 (20’ length) 2” – 49011-010 (10’ length) 2” – 40911-020 (20’ length) 3” – 49013-010 (10’ length) 3” – 49013-020 (20’ length) |
5/26/09 | ||
| Rocky Mountain Colby Pipe | 2” – 502010U – 10’ or 502020U – 20’ 3” – 503010U – 10’ or 503020U – 20’ 4” – 504010U – 10’ or 504020U – 20’ |
4/7/09 |
| Comment: | ||
|
Schedule 40 PVC |
|
|
Top | Return to Approved Materials | |
PVC Fittings
| Notes | Manufacturer | Catalog Number | Approval Date | Photos |
| Cantex | Standard Couplings: 1” – 6141625 2” – 6141628 90º Elbows 36” Radius for Power:(Plain End / Belled End) 3” – 5133820 / 5233930 90º Elbows:(Plain End/Belled End) 1” – 5133825 / 5233825 2” – 5133828 / 5233828 45º Elbows:(Plain End/Belled End) 1” – 5133765 / 5233765 2” – 5133768 / 5233768 30º Elbows:(Plain End/Belled End) 1” – 5133745 / 5233745 2” – 5133748 / 5233748 |
5/5/03 | ||
| Heritage Plastics | Standard Couplings: 1” – 610002 2” – 610005 90º Elbows 36” Radius for Power: (Plain End / Belled End) 3” – 611392 / 611142 90º Elbows: (Plain End / Belled End) 1” – 611002 / 611058 2” – 611005 / 611061 45º Elbows: (Plain End / Belled End) 1” – 611016 / 611071 2” – 611019 / 611074 30º Elbows: (Plain End / Belled End) 1” – 611030 / 611085 2” – 611033 / 611088 |
7/24/12 | ||
| IPEX / PW Eagle | Standard Couplings: 1” – EC20 / 077003 2” – EC35 / 077006 90º Elbows 36” Radius for Power: (Plain End / Belled End) 3” – 068767 / 068058 90º Elbows: (Plain End / Belled End) 1” – 068582 / 068422 2” – 068585 / 068425 45º Elbows: (Plain End / Belled End) 1” – 068602 / 068563 2” – 068605 / 068566 30º Elbows: (Plain End / Belled End) 1” – 068622 / EE2030 2” – 068625 / EE3530 |
12/22/05 | ||
| Plastic Trends / Royal Pipe Systems | Standard Couplings: 1” – E010100 2” – E010200 90º Elbows 36” Radius for Power: (Plain End / Belled End) 3” – E07530036 / E07930036 90º Elbows: (Plain End / Belled End) 1” – E018100 / E021100 2” – E018200 / E021200 45º Elbows: (Plain End / Belled End) 1” – E019100 / E022100 2” – E019200 / E022200 30º Elbows: (Plain End / Belled End) 1” – E020100 / E072100 2” – E020200 / E072200 |
1/8/10 | ||
| Formerly Carlon | Prime Conduit | Standard Couplings: 1” – E940F 2” – E940J 90º Elbows 36” Radius for Power: (Plain End / Belled End) 3” – UA9FL / UA9FLB 90º Elbows: (Plain End / Belled End) 1” – UA9AF / UA9AFB 2” – UA9AJ / UA9AJB 45º Elbows: (Plain End / Belled End) 1” – UA7AF / UA7AFB 2” – UA7AJ / UA7AJB 30º Elbows: (Plain End / Belled End) 1” – UA6AF / UA6AFB 2” – UA6AJ / UA6AJB |
5/26/03 |
| Comment: | ||
| Schedule 40 PVC |
|
|
Top | Return to Approved Materials | |
HDPE Conduit
| Notes | Manufacturer | Catalog Number | Approval Date | Photos |
| Dura-Line now owns Arnco, Boreflex, Carlon and Lamson Pipe | Dura-Line | 2” – 2SDR135GRY 3” – 3SDR135GRY |
3/28/13 |
| Comment: | ||
| SDR 13.5 all sizes Gray color Smooth outside wall UV Stabilized |
HDPE Service Conduit
| Notes | Manufacturer | Catalog Number | Approval Date | Photos |
| Dura-Line now owns Arnco, Boreflex, Carlon and Lamson Pipe | Dura-Line | 2” – 2SDR135BLK/RED 3” – 3SDR135BLK/RED |
3/8/13 |
| Comment: | ||
| SDR 13.5 Black with red stripes Smooth outside wall UV Stabilized |
|
|
Top | Return to Approved Materials | |
HDPE Couplings
| Notes | Manufacturer | Catalog Number | Approval Date | Photos |
| American Ploywater | Bonduit Conduit Adhesive Use only with Cantex Sch 40 PVC Longline Couplings: 2” – 6202000 3” - 6202005 |
10/11/10 | ||
| Cabletec | AS 2.375 – 2” AS 3.500 – 3” |
8/2/01 | ||
| Central Plastics Company | Electrofusion Couplings 2” IPS 575-0042 3” IPS 575-0043 |
5/5/06 | ||
| Dura-Line | PushLock Couplings 1-908353 – 2” |
10/5/10 | ||
| Tyco Electronics / Jackmoon | Moon-Link Transparent Duct Coupling 2” – 20TC238SP 3” – 30TC350SP |
12/23/02 | ||
| Unitex | Pro-Poly CA Adhesive Use only with Cantex Sch 40 PVC Longline Couplings: 2” – 6202000 3” – 6202005 |
1/9/06 |
Connector Kits, Fuse Holders and Fuses
Multi-tap Connectors
| Notes | Manufacturer | Catalog Number | Approval Date | Photos | Comments |
| Purchased by Hubbell | Connector MFG.Co. | CMC SLK-112 I | 1/11/01 | 6061-T6 aluminum Provide rubber boot cover – black plastisol | |
| Durham Company | 9205159 | 8/22/13 | |||
| Fargo Mfg. Company, Inc subsidiary of Hubbell Inc. | Fargo GO-32 | 5/5/03 | |||
| Polaris | SLCS4A-4P | 9/21/07 | Coated w/ allen head screw – does not need rubber boot |
|
|
Top | Return to Approved Materials | |
Un-Fused Fuse Holders
| Notes | Manufacturer | Catalog Number | Approval Date | Photos |
| Ideal Industries purchased Buchanan | Ideal Industries / Buchanan / Elastimold | Style 20 U Breakaway | 5/5/03 |
| Comment: | ||
| Single pole in-line non-fused 600 volt, 30 amp Copper #10 AWG conductor size |
Fused Fuse Holders
| Notes | Manufacturer | Catalog Number | Approval Date | Photos |
| Ideal purchased Buchanan | Ideal Industries / Buchanan / Elastimold | Style 65 U Breakaway | 5/5/03 |
| Comment: | ||
| Single pole in-line fused 600 volt, 8 amp Copper #10 AWG conductor size |
Fuses
| Notes | Manufacturer | Catalog Number | Approval Date | Photos |
| Bussmann Circuit Protection, Worldwide | Limitron Type KTK8 | 5/5/03 | ||
| Ferraz Shawmut | ATM-8 | 1/25/02 | ||
| Littelfuse | KLK-8 | 7/31/01 |
| Comment: | ||
| 600 volt, 8 amp |
|
|
Top | Return to Approved Materials | |
Splice Kits
| Notes | Manufacturer | Catalog Number | Approval Date | Photos | Comments |
| Burndy | Split-Bolt Connectors KS15 - #10 STR to #8 STR KS20 - #8 STR to #4 STR KS22 - #6 STR to #3 STR KS23 - #6 STR to #2 STR KS25 - #4 STR to #1/0 STR Copper Compression Tees YST4C4C - #4 STR to #4 STR |
5/5/03 | |||
| NSI Industries Polaris Blue | ISW-4 - #4 two-port in-line splice ITW-4 - #4 two port IPLW4-3 - #4 three port IPLW4-3 - #4 four port |
9/11/07 | Waterproof/submersible |
Control Centers
Control Centers (Four-Circuit)
| Notes | Manufacturer | Catalog Number | Approval Date | Photos |
| Milbank | CP3B91115PAOOP4 | 4/8/11 | ||
| Myers Electric Products, Inc. | MEUG16AR-M100-OPK | 7/24/12 | ||
| Purchased by Myers 12/10/12 | Pacific Utility Products | USP16R-M2100-112C-AL-OPK | 2/3/11 |
| Comment: | ||
| Ringless meter cover with horn bypass and exposed meter |
Control Centers (Single-Circuit)
| Notes | Manufacturer | Catalog Number | Approval Date | Photos |
| Milbank | Pending approval | |||
| Myers Electric Products, Inc. | MET2-VLM-LTS-R | 7/24/12 | ||
| Purchased by Myers 12/10/12 | Pacific Utility Products | USP2R-100-112C-OPK-LT-PM | 2/17/12 |
| Comment: | ||
| Ringless meter cover and horn bypass with mounting collar for stand alone unit. |
|
|
Top | Return to Approved Materials | |
Grounding Equipment
Ground Rod
| Notes | Manufacturer | Catalog Number | Approval Date | Photos |
| Chance/Hubbell | Cat No. C611300 | 4/24/12 | ||
| Erico Inc. / Eritech | Cat. No. 611300 – ½” x 10’ Cat. No. 613400 – ¾” x 10’ |
2/27/02 | ||
| ITTBlackburn | Cat. No. 5010 | 5/5/03 | ||
| Joslyn | Cat No. J-8330 | 5/5/03 | ||
| Knight | GRC 1210 | 5/5/03 |
| Comment: | ||
| ½” x 10’-0” long Copper clad steel core UL listed |
Ground Rod Clamp
| Notes | Manufacturer | Catalog Number | Approval Date | Photos |
| Burndy | GRC 12 – ½” GRC34 – ¾” |
2/27/02 | ||
| Erico Inc. / Eritech | Part No. HDC12 – ½” Part No. HDC34 – ¾” |
12/1/05 | ||
| ITT Blackburn | Type JAB-12H | 5/5/03 |
| Comment: | ||
| Hex head set screw Copper alloy Long bearing surface UL listed |
|
|
Top | Return to Approved Materials | |
Junction and Service Boxes
Type I Junction Box
| Notes | Manufacturer | Catalog Number | Approval Date | Photos |
| Armorcast | A6001423TA (12” x 12” x 12”) | 1/11/01 | ||
| CDR | SB33-1212-12 – Box only SC30-1212-02 – Cover only SA33-1212-12 – Assembly |
5/19/95 | ||
| Highline | PHB121212 – Box only CHC1212SL – Cover only PHA121212SL2 – Assembly |
3/3/11 | ||
| Martin Enterprises | 121212PCB – Box only 1212PCC – Cover only 121212PC – Assembly |
10/17/11 | ||
| New Basis | PCB121212A04 – Box only PCC121212A04 – Cover only PCA121212A4009 – Assembly |
2/26/02 | ||
| Carson Series H boxes were purchased by Oldcastle | Oldcastle | 12122001 – Box only 12124006– Cover only 12121003 w/ 12124006 “Street Lighting” – Assembly 80002052 hex head bolts if separate |
8/29/13 | |
| Quazite | PC1212BA12 – Box only PC1212CA0041 – Cover only |
5/5/03 |
| Comment: | ||
| Logo to read “Street Lighting” Cover to be ¾” thick (CDR is 1 ½” thick) Straight wall No mouseholes 3/8” – 16 NC hex head bolts and washers |
|
|
Top | Return to Approved Materials | |
Type II Junction Box
| Notes | Manufacturer | Catalog Number | Approval Date | Photos |
| Armorcast | A6001429TA (11”x18”x12”) | 7/30/01 | ||
| CDR | SB33-1118-12 – Box only SC30-1118-02 – Cover only SA33-1118-12 – Assembly |
5/19/95 | ||
| Highline | PHB111812 – Box only CHC1118SL – Cover only PHA111812SL2 – Assembly |
3/3/11 | ||
| Martin Enterprises | 111812PCB – Box only 1118PCC – Cover only 111812PC – Assembly |
10/17/11 | ||
| New Basis | PCB111812A04 – Box only PCC111812A04 – Cover only PCA111812A866 – Assembly |
2/26/02 | ||
| Carson Series H boxes were purchased by Oldcastle | Oldcastle | 11182001 – Box only 11184007 – Cover only 11181617 – Assembly 80002033 hex head bolts if separate |
8/29/13 | |
| Quazite | PG1118BA12 – Box only PG1118CA0041 – Cover only |
5/5/03 |
| Comment: | ||
| Logo to read “Street Lighting” Cover to be 1 ¾” to 2” thick Straight wall No mouseholes 3/8” – 16 NC hex head bolts and washers |
|
|
Top | Return to Approved Materials | |
Lamps
High Pressure Sodium
| Notes | Manufacturer | Catalog Number | Approval Date | Photos |
| General Electric | Lucalox – HPS lamps 100 W – LU100/ECO/NC – 14673 150 W – LU150/55/ECO/NC – 40390 250 W – LU250/ECO/NC – 14674 400 W – LU400/ECO/NC – 14675 |
11/4/10 | ||
| Phillips | 100 W – C100S54/ALTO/NC – 14740-5 150 W – C150S55/ALTO/NC – 14741-3 250 W – C250S50/ALTO/NC – 14742-1 400 W – C400S51/ALTO/NC – 14743-9 |
10/14/11 | ||
| Sylvania | Lumalux PLUS/ECO – HPS lamps 100 W – LU100/PLUS/ECO – 67559 150 W – LU150/55/PLUS/ECO – 67494 250 W – LU250/PLUS/ECO – 67572 400 W – LU400/PLUS/ECO – 67312 |
3/26/08 |
| Comment: | ||
| Clear lamp Mogul base ECO/ALTO = Low Mercury NC = Non Cycling 30,000+ Hour Average Life |
|
|
Top | Return to Approved Materials | |
Luminaires
Cobra-Head Luminaire
| Notes | Manufacturer | Catalog Number | Approval Date | Photos |
| Photometric Curves 150:AE7361-70fg3.ies 250 & 400: AEL12963.ies |
American Electric Lighting – Acuity Brands |
31515SCAMT2R3FGM2NRHPAR8663 – 150W HPS 32525SCAMT2R3FGNRHPAR8037 – 250W HPS 32540SCAMT2R3FGNRHPAR8037 – 400W HPS |
4/28/05 4/15/05 |
|
| Photometric Curves 150: GE7285.ies 250 & 400: GE1002.ies or GE7323.ies |
General Electric | M2AC15S0A1GMC31347 – 150W HPS MDCA25S0A12FMC31 – 250W HPS MDCA40S0A12FMC31 – 400W HPS |
5/5/03 | |
| 150 & 250: HP03116.ies 400: HP03065.ies |
Hubbell | RMCD15S38031125F0M53-150W RMCD25S38031125F0M53-250W RLCD40S38031125F0M53-400 W |
5/5/03 |
| Comment: | ||
| 2-Bolt slip fitter connection for 150 W fixtures 4-Bolt slip fitter connection large housing for 250 W and 400 W fixtures Multi-Tap Ballast Plug-In “Protected” starter Aluminum wildlife guard NO PHOTOCELL |
Highway Luminaire
| Notes | Manufacturer | Catalog Number | Approval Date | Photos |
| Photometric Curve 400W: 452580.ies | General Electric | RPFT40S0A1GLN4GR – 400W HPS | 5/5/03 |
|
|
Top | Return to Approved Materials | |
Residential Post Top
| Notes | Manufacturer | Catalog Number | Approval Date | Photos |
| Photometric Curves 100 & 150 W: 42737 |
Holophane | PTU-10DHP-MT-B-P3-B-P – 100 W PTU-15DHP-MT-B-P3-B-P – 150 W |
2/14/03 | |
| Photometric Curves mpb15s3a – Type 3 mpb15sa – Type 5 |
Sentry | SLH-100HPS-240MT-BLAF –Type 3 SLH-150HPS-240MT-BLAF –Type 3 SLH-100HPS-240MT-BLSF –Type 5 |
5/5/03 |
| Comment: | ||
| Multi-Tap Ballast |
Photocell
System Photocell
| Notes | Manufacturer | Catalog Number | Approval Date | Photos |
| Dark To Light (DTL) | DP124-0.2-1821 | 3/27/13 |
| Comment: | ||
| 120Volt, Turn on at 0.2 Fc Silicon Chip |
|
|
Top | Return to Approved Materials | |
Poles
Aluminum Poles 30' Mounting Heights
| Notes | Manufacturer | Catalog Number | Approval Date | Photos |
| Hapco | 27’-6” Poles: Dwg # B84165-001 – Type OP301 w/single 6’ arm – 10/04 Rev 1 Dwg # B84165-002 – Type OP301 w/single 8’ arm – 10/04 Rev 1 Dwg # B79636-001 – Type OP302 w/single 12’ arm – 10/04 Rev 2 Dwg # B84165-003 – Type OP303 w/twin single member 8’ arms – 10/04 Rev 1 Dwg # B79636-005 – w/twin 8’ truss arms – 10/04 Rev 2 Identification Label: Dwg # B84166 9-3-03 |
11/1/04 | ||
| Valmont | 27’-6” Poles: Dwg # KS-71 – Type OP301 w/Rev 2 Dwg # KS-72 – Type OP302 w/Rev 2 Dwg # KS-73 – Type OP303 w/Rev 2 Handholes: Dwg # KS-86 – Type OP301 w/Rev 2 Dwg # KS-86 – Type OP302 w/Rev 2 Dwg # KS-87 – Type OP303 Identification Label: Dwg # KS-89 and KS-89A |
9/13/05 |
| Comment: | ||
| J-hook at top of pole Handhole cover keeper chain attached to bottom of handhole opening or Hinged handhole option Grounding screw shaft installed parallel to pole shaft at back side of pole. Labeled with manufacturer identification tag. 0.188” Wall Thickness Cable hook at top of pole |
|
|
Top | Return to Approved Materials | |
Aluminum Poles 40' Mounting Heights
| Notes | Manufacturer | Catalog Number | Approval Date | Photos |
| Hapco | 37’-6” Poles: Dwg # 84165-004 – Type OP401 w/single 6’ arm – 10/04 Rev 1 Dwg # 84165-005 – Type OP401 w/single 8’ arm – 10/04 Rev 1 Dwg # B79636-002 – Type OP402 w/single 10’ arm – 10/04 Rev 2 Dwg # B79636-003 – Type OP402 w/single 12’ arm – 10/04 Rev 2 Dwg # B79636-004 – Type OP402 w/single 15’ arm – 10/04 Rev 2 Dwg # 80061-001 Type OP403 w/twin 12’ & 8’ arms – 10/04 Rev 3 Dwg # 80061-002 Type OP403 w/twin 12’ arms – 10/04 Rev 3 Dwg # 80061-003 Type OP403 w/twin 15’ arms – 10/04 Rev 3 Dwg # 80061-004 Type OP403 w/twin 10’ arms – 10/04 Rev 3 Identification Label: Dwg # B84166 9-3-03 |
11/1/04 | ||
| Valmont | 37’-6” Poles: Dwg # KS-74 – Type OP401w/Rev 2 Dwg # KS-75 – Type OP402 w/Rev 3 Dwg # KS-76 – Type OP403 w/Rev 3 Handholes: Dwg # KS-87 – Type OP401 w/Rev 2 Dwg # KS-87 – Type OP402 w/Rev 2 Dwg # KS-88 – Type OP403 w/Rev 1 Identification Label: Dwg # KS-89 & KS-89A |
9/13/05 |
| Comment: | ||
| J-hook at top of pole Handhole cover keeper chain attached to bottom of handhole opening or Hinged handhole option Grounding screw shaft installed parallel to pole shaft at back side of pole. Labeled with manufacturer identification tag. 0.219” Wall Thickness |
|
|
Top | Return to Approved Materials | |
Aluminum Street Light Bracket Arms
| Notes | Manufacturer | Catalog Number | Approval Date | Photos |
| Hapco | Information Contained on Pole Drawings. | 9/3/03 | ||
| Valmont | Arms: Dwg # KS-77 – 6’ Single – 5/14/03 Dwg # KS-78 – 8’ Single – 5/14/03 Dwg # KS-79 – 8’ Truss – 5/14/03 Dwg # KS-80 – 10’ Truss – 5/14/03 Dwg # KS-81 – 12’ Truss – 5/14/03 Dwg # KS-82 – 15’ Truss – 5/14/03 Arm Attachment: Dwg # KS-83 – Single w/Rev 1 Dwg # KS-84 – Truss w/Rev 1 |
11/29/04 |
| Comment: | ||
| Supply end cap on lower truss member. Labeled with identification tag. |
Aluminum Poles 14' Mounting Heights
| Notes | Manufacturer | Catalog Number | Approval Date | Photos |
| Hapco | Dwg # A66338 w/Rev # 10 – 4/08 | 4/23/08 | ||
| Valmont | Dwg # KS-70 – Type OP14 w/Rev 5 Dwg # KS-85 – Handhole w/Rev 1 Dwg # KS-89 – ID Detail |
4/23/08 |
| Comment: | ||
| Handhole cover keeper chain attached to bottom of handhole opening. Handhole should be smooth and free of burrs. Grounding screw shaft installed parallel to pole shaft at back side of pole. Labeled with manufacturer identification tag. 0.156” Wall Thickness |
|
|
Top | Return to Approved Materials | |
Screw-In Pole Foundations
| Notes | Manufacturer | Catalog Number | Approval Date | Photos |
| AB Chance | T112-0363 – R OP14 T112-0748 – T1 OP301/302/303 T112-02930101 – F1 OP401/402 T112-02940101 – F2 OP403 |
2/20/06 | ||
| Dixie | D-1202-0029-A – R OP14 D-1202-0465-A – T1 OP301/302/303 D-1202-0031-A – F1 OP401/402 D-1202-0032-A – F2 OP403 |
4/10/13 | ||
| Earth Contact Products | LPS-66T-048-12 – R OP14 LPS-66T-060-12 – T1 OP301/302/303 LPS-86T-60A-14 – F1 OP401/402 LPS-86T-60B-14 – F2 OP403 |
10/15/12 | ||
| JH Botts, Inc. | Dwg # JHBOPK-1 w/Rev A | 8/20/03 | ||
| Pelco | SK-1094-1 Rev C – R OP14 SK-1109-1 Rev B – T1 OP301/302/303 SK-1108-1 Rev B – F1 OP401/402 SK-1095-1 Rev E – F2 OP403 |
7/19/06 |
| Comment: | ||
| Manufacturer and foundation identification stenciled on base plate with ¼” to ½” lettering. |