Approved Materials - Streetlighting

From PPM Wiki - City of Overland Park Projects and Procedures Manual Pages
Jump to navigation Jump to search

Return to Complete Preapproved Materials Page


GeekNotesIcon.png Note: This document is provided as a benefit to contractors and suppliers who are bidding projects for the City of Overland Park. Only products identified on this list will be approved for installation on City construction projects. This list shall not be used as a substitute for catalog cuts or material approval. All material approvals shall be submitted on the approved City of Overland Park Contract Project Submittal form. The form is available at City Hall by contacting Bruce Wacker at (913) 895-6027. Failure to comply will be cause for rejection of materials until proper submittals are received. This list is updated periodically. The contractor or supplier shall contact the City of Overland Park to make sure that they have the most current list prior to bidding a project. Failure to do so shall not constitute a legitimate claim for change orders. Before accessing any links, the City recommends that the user delete browsing history to insure the latest catalog cut information is displayed correctly.

Contractor Submittal Form

Breakaway Pole Devices

Break-away Couplings and Bases

Notes Manufacturer Catalog Number Approval Date Photos
Precision Form, Inc. PFI-200-1A Breakaway Couplings 5/5/03 Coupling
Nut
Label
Formerly Akron Foundries, Inc. / Hapco AASHTO No. TB6-9”–10 ½” to 12½” Bolt Circle
Dwg # A79402 – 4/4/98

AASHTO No. TB5-9”–14 ½” to 15¼” Bolt Circle
Dwg # A79236 – 1/4/00
8/15/03 Label
Top View
Bottom View
Side View
Inside Cover Latch
Formerly Akron Foundries, Inc. / Valmont CS-300 – Up to 12” Bolt Circle AASHTO No. TB6-9
7" Diameter Shaft: Model No. 07R115125B9K w/ Rev 1
8" Diameter Shaft: Model No. 08R115125B9K w/ Rev 1

CS-370 – 14 ½” to 15” Bolt Circle AASHTO No. TB5-9
Model No. 10R145153B9K w/ Rev 1
4/23/18 Side View
Top View
Label

Up arrow 66x80.png Top Return to Approved Materials
Side arrow 80x66.png

Cable

#6 AWG Equipment Ground Wire

Notes Manufacturer Catalog Number Approval Date Photos
Advanced Digital Cable BC06S 5/20/16 Bare Copper Cable
Alan Wire Bare No. 6 AWG 7/4/14
Cerro Wire & Cable Co, Inc. 050-2200x or 050-2215x
x = I for 315' Reel
x = K for 1,000' Reel
x = p for 5,000' Reel
5/5/03
Encore Wire LTD Bare No. 6 AWG 8/1/03
Service Wire Co BSOS6 5/7/02
Southwire Bare No. 6 AWG 5/5/03
Comment:
Soft Drawn Bare Solid Copper #6 AWG

Distribution Cable

Notes Manufacturer Catalog Number Approval Date Photos
Advanced Digital Cable 304
UL file # E197262
5/20/16 Mfg Label
AWG Label
Cable
Alan Wire 04USE11 – 500’
UL file #E322440
1/30/12 Cable
Cerro Wire & Cable Co, Inc. 1201-4401x - Black
x = K for 1,000' Reel
x = P for 5,000' Reel

UL file # E11098
5/5/03
Part of Prysmian Group Draka Cableteq 388932 7/8/09 Cable
Label View 1
Label View 2
Label View3
Encore Wire LTD UL file # E174428 8/1/03 E-File Number
End View
Label View 1
Label View 2
Kris Tech Wire Co, Inc. 0407-RHW/USE-BK
UL file # E207792
11/24/03 Cable
Label View 1
Label View 2
Service Wire Co USE4BK
UL file # E105667
5/7/02 Cable
Label
Southwire 11-32-72
UL file # E32071
5/5/03
Comment:
No. 4 AWG USE-2 Copper
Black insulation
Single cable, not three cables twisted on the reel

Up arrow 66x80.png Top Return to Approved Materials
Side arrow 80x66.png

Pole Cable

Notes Manufacturer Catalog Number Approval Date Photos
Advanced Digital Cable 410 - Black
410RD - Red
410GN - Green
UL file # E208489
5/20/16 Black Cable
Label
Red Cable
Green Cable
Cerro Wire & Cable Co, Inc. Black – 112-3801
Red – 112-3803
Green – 112-3805
UL file # E15119
5/5/03
Encore Wire LTD UL file # E123774 8/1/03 Black Cable Label 1
Black Cable Label 2
Red Cable Label 1
Southwire Red – 22-97-57
Black – 22-97-32
Green – 22-97-73
UL file # E23919
5/5/03
Comment:
Stranded copper
THHN/THWN #10 AWG
Color Coded Red and Black
Green for ground cable

Up arrow 66x80.png Top Return to Approved Materials
Side arrow 80x66.png

Electrical Service Cable

Notes Manufacturer Catalog Number Approval Date Photos
Advanced Digital Cable 302
UL file # E197262
5/20/16 Mfg Label
AWG Label
Cable
Alan Wire Product Number 02USE11 – 500’
UL file #E322440
1/30/12
Cerro Wire & Cable Co, Inc. 1201-4601 - Black
1201-4602 - White
1201-4605 - Green

UL file # E11098
5/5/03
Part of Prysmian Group Draka Cableteq Product Number 389417 7/8/09
Encore Wire LTD UL file # E174428 8/1/03
Kris Tech Wire Co, Inc. 0207-RHW/USE-BK
UL file # E207792
11/24/03
Service Wire Co USE2BK
UL file # E105667
5/7/02
Southwire 113498 - Black
476523 - White
958009 - Green

UL file # E32071
5/5/03
Comment:
No. 2 AWG USE-2 Copper
Single cable, not three cables twisted on the reel

Up arrow 66x80.png Top Return to Approved Materials
Side arrow 80x66.png

Conduit and Fittings

Schedule 40 PVC Conduit

Notes Manufacturer Catalog Number Approval Date Photos
Cantex 1” – A52BA12
1 ½” – A52BE12
2” – A52CA12
3" – A52DA12
4" – A52EA12
5/5/03
Heritage Plastics 1” – 8104 (10’ length)
1" – 8504 (20’ length)
1 ½” – 8106 (10’ length)
1 ½” – 8506 (20’ length)
2” – 8108 (10’ length)
2" – 8508 (20’ length)
3” – 8112 (10’ length)
3" – 8512 (20’ length)
4” – 8116 (10’ length)
4" – 8516 (20’ length)
1/23/19
IPEX / Scepter 1” – 032410 (10’length)
1” – 032411 (20’ length)
1 ½” – 032415 (10' length)
1 ½” – 032416 (20' length)
2” – 032420 (10’length)
2" – 032421 (20’ length)
3” – 032430 (10’ length)
3" - 032431 (20’ length)
4” – 032440 (10’ length)
4" – 032441 (20’ length)
12/22/05
Prime Conduit 1” – 49008-010 (10’ length)
1” – 49008-020 (20’ length)
1 1/2" – 49010-010 (10' length)
1 1/2" – 49010-020 (20' length)
2” – 49011-010 (10’ length)
2” – 40911-020 (20’ length)
3” – 49013-010 (10’ length)
3” – 49013-020 (20’ length)
4" – 49015-010 (10' length)
4" – 49015-020 (20' length)
5/26/09 Bell End
End View
Label
Rocky Mountain Colby Pipe 1" – 504010010U (10' length)
1" – 504010020U (20' length)
1 1/2" – 504015010 (10' length)
1 1/2" – 504015020U (20' length)
2” – 504020010U (10’ length)
2" – 504020020U (20’ length)
3” – 504030010U (10’ length)
3" – 504030020U (20' length)
4” – 504040010U (10’ length)
4" – 504040020U (20’ length)
4/7/09 Bell End
End View
Label
Comment:

Schedule 40 PVC shall only be used in under ground applications

Schedule 80 PVC Conduit

Notes Manufacturer Catalog Number Approval Date Photos
Cantex 1” – A53BA12
1 ½” – A53BE12
2” – A53CA12
3" – A53DA12
4" – A53EA12
1/23/19
Heritage Plastics 1” – 9304 (10’ length)
1" – 9504 (20’ length)
1 ½” – 9306 (10’ length)
1 ½” – 9506 (20’ length)
2” – 9308 (10’ length)
2" – 9508 (20’ length)
3” – 9312 (10’ length)
3" – 9512 (20’ length)
4” – 9316 (10’ length)
4" – 9516(20’ length)
1/23/19
IPEX / Scepter 1” – 032510 (10’length)
1” – 032511 (20’ length)
1 ½” – 032515 (10' length)
1 ½” – 032516 (20' length)
2” – 032520 (10’length)
2" – 032521 (20’ length)
3” – 032530 (10’ length)
3" - 032531 (20’ length)
4” – 032540 (10’ length)
4" – 032541 (20’ length)
1/23/19
Prime Conduit 1” – 49408-010 (10’ length)
1” – 49408-020 (20’ length)
1 1/2" – 49410-010 (10' length)
1 1/2" – 49410-020 (20' length)
2” – 49411-010 (10’ length)
2” – 40911-020 (20’ length)
3” – 49413-010 (10’ length)
3” – 49413-020 (20’ length)
4" – 49415-010 (10' length)
4" – 49415-020 (20' length)
1/23/19
Rocky Mountain Colby Pipe 1" – 508010010U (10' length)
1" – 508010020U (20' length)
1 1/2" – 508015010 (10' length)
1 1/2" – 508015020U (20' length)
2” – 508020010U (10’ length)
2" – 508020020U (20’ length)
3” – 508030010U (10’ length)
3" – 508030020U (20' length)
4” – 508040010U (10’ length)
4" – 508040020U (20’ length)
1/28/19
Comment:

Schedule 80 PVC shall only be used in above ground applications or exposed on the underside of bridge decks.

Schedule 40 PVC Fittings

Notes Manufacturer Catalog Number Approval Date Photos
Allied Tube & Conduit Standard Couplings:
 1” – 59603
 2” – 59606
 3" – 59608

90º Elbows 36” Radius for Power:
(Plain End / Bell End)

 3” – 59732 / NA
90º Elbows: (Plain End / Belled End)
 1” – 59590 / 802754
 2” – 59593 / 802757
 3” – 59595 / 802759
45º Elbows:(Plain End / Belled End)
 1” – 59577 / 802768
 2” – 59580 / 802771
 3” – 59582 / 802773
30º Elbows: (Plain End / Belled End)
 1” – 59563 / 802780
 2” – 59566 / 802783
 3" – 59568 / 802785

9/3/14
Cantex Standard Couplings:
 1” – 6141625
 2” – 6141628
 3" – 6141630

90º Elbows 36” Radius for Power:
(Plain End / Belled End)

 3” – 5133820 / 5233930
90º Elbows: (Plain End / Belled End)
 1” – 5133825 / 5233825
 2” – 5133828 / 5233828
 3” – 5133830 / 5233830
45º Elbows:(Plain End / Belled End)
 1” – 5133765 / 5233765
 2” – 5133768 / 5233768
 3” – 5133770 / 5233770
30º Elbows: (Plain End / Belled End)
 1” – 5133745 / 5233745
 2” – 5133748 / 5233748
 3" – 5133750 / 5233750
22.5º Elbows: (Plain End / Belled End)
 1” – NA / 5236402
 2” – 5134067 / 5234067
 3" – 5134068 / 5234068

10/29/13
Heritage Plastics Standard Couplings:
 1” – 610002
 2” – 610005
 3” – 610007

90º Elbows 36” Radius for Power:
(Plain End) / (Belled End)

 3” – 611392 / 611142
90º Elbows: (Plain End) / (Belled End)
 1” – 611002 / 611058
 2” – 611005 / 611061
 3" - 611007 / 611063
45º Elbows: (Plain End) / (Belled End)
 1” – 611016 / 611071
 2” – 611019 / 611074
 3” – 611021 / 611076
30º Elbows: (Plain End) / (Belled End)
 1” – 611030 / 611085
 2” – 611033 / 611088
 3” – 611035 / 611090

7/24/12
IPEX / Scepter Standard Couplings:
 1” – EC20
 2” – EC35
 3” – EC45

90º Elbows 36” Radius for Power:
(Plain End / Belled End)

 3” – 068767 / 068058
90º Elbows: (Plain End / Belled End)
 1” – EE2090 / EE2090B
 2” – EE3590 / EE3590B
 3” – EE4590 / EE4590B
45º Elbows: (Plain End / Belled End)
 1” – EE2045 / EE2045B
 2” – EE3545 / EE3545B
 3” – EE4545 / EE4545B
30º Elbows: (Plain End / Belled End)
 1” – EE2030 / NA
 2” – EE3530 / NA
 3” – EE4530 / NA
22.5º Elbows: (Plain End / Belled End)
 1” – NA / NA
 2” – EE2022 / NA
 3” – EE3022 / NA

12/22/05
Prime Conduit Standard Couplings:
 1” – CP100
 2” – CP200
 3" – CP300

90º Elbows 36” Radius for Power:
(Plain End / Belled End)

 3” – UA9FL / UA9FLB
90º Elbows: (Plain End / Belled End)
 1” – UA9AF / UA9AFB
 2” – UA9AJ / UA9AJB
 3” – UA9AL / UA9ALB
45º Elbows: (Plain End / Belled End)
 1” – UA7AF / UA7AFB
 2” – UA7AJ / UA7AJB
 3” – UA7AL / UA7ALB
30º Elbows: (Plain End / Belled End)
 1” – UA6AF / UA6AFB
 2” – UA6AJ / UA6AJB
 3” – UA6AL / UA6ALB

5/26/03
Comment:
To be used with Schedule 40 PVC conduit

Schedule 80 PVC Fittings

Notes Manufacturer Catalog Number Approval Date Photos
Allied Tube & Conduit Standard Couplings:
 1” – 59603
 2” – 59606
 3" – 59608

90º Elbows 36” Radius for Power:
(Plain End / Bell End)

 3” – 597392 / 926013
90º Elbows: (Plain End / Belled End)
 1” – 59014 / 924949
 2” – 59017 / 924970
 3” – 59019 / 924993
45º Elbows:(Plain End / Belled End)
 1” – 59002 / NA
 2” – 59005 / 924967
 3” – 59007 / 924990
30º Elbows: (Plain End / Belled End)
 1” – 59066 / NA
 2” – 59069 / NA
 3" – 59071 / NA

1/29/19
Cantex Standard Couplings:
 1” – 6141625
 2” – 6141628
 3" – 6141630

90º Elbows 36” Radius for Power:
(Plain End / Belled End)

 3” – 5121081 / 5121038
90º Elbows: (Plain End / Belled End)
 1” – 5121055 / NA
 2” – 5121058 / 5221058
 3” – 5121060 / 5221060
45º Elbows:(Plain End / Belled End)
 1” – 5121005 / NA
 2” – 5121008 / 5221008
 3” – 5121010 / 5221010
30º Elbows: (Plain End / Belled End)
 1” – 5121002 / NA
 2” – 5121108 / NA
 3" – 5121110 / NA
22.5º Elbows: (Plain End / Belled End)
 1” – NA / NA
 2” – 5136659 / 5221052
 3" – 5136679 / 5236679

1/29/19
Heritage Plastics Standard Couplings:
 1” – 59603
 2” – 59606
 3” – 59608

90º Elbows 36” Radius for Power:
(Plain End) / (Belled End)

 3” – 597392 / 926013
90º Elbows: (Plain End) / (Belled End)
 1” – 59014 / 924949
 2” – 59017 / 924970
 3" - 59019 / 924993
45º Elbows: (Plain End) / (Belled End)
 1” – 59002 / NA
 2” – 59005 / 924967
 3” – 59007 / 924990
30º Elbows: (Plain End) / (Belled End)
 1” – 59066 / NA
 2” – 59069 / NA
 3” – 59071 / NA

1/29/19
IPEX / Scepter Standard Couplings:
 1” – EC20
 2” – EC35
 3” – EC45

90º Elbows 36” Radius for Power:
(Plain End / Belled End)

 3” – 068777 / NA
90º Elbows: (Plain End / Belled End)
 1” – 80EE2090 / NA
 2” – 80EE3590 / NA
 3” – 80EE4590 / NA
45º Elbows: (Plain End / Belled End)
 1” – 80EE2045 / NA
 2” – 80EE3545 / NA
 5” – 80EE4545 / NA
30º Elbows: (Plain End / Belled End)
 1” – 80EE2030 / NA
 2” – 80EE3530 / NA
 3” – 80EE4530 / NA

1/29/19
Prime Conduit Standard Couplings:
 1” – CP100
 2” – CP200
 3" – CP300

90º Elbows 36” Radius for Power:
(Plain End / Belled End)

 3” – UB9FL / UB9FLB
90º Elbows: (Plain End / Belled End)
 1” – UB9AF / UB9AFB
 2” – UB9AJ / UB9AJB
 3” – UB9AL / UB9ALB
45º Elbows: (Plain End / Belled End)
 1” – UB7AF / UB7AFB
 2” – UB7AJ / UB7AJB
 3” – UB7AL / UB7ALB
30º Elbows: (Plain End / Belled End)
 1” – UB6AF / UB6AFB
 2” – UB6AJ / UB6AJB
 3” – UB6AL / UB6ALB

1/29/19
Comment:
To be used with Schedule 80 PVC conduit

Up arrow 66x80.png Top Return to Approved Materials
Side arrow 80x66.png

Bridge Expansion Couplings

Notes Manufacturer Catalog Number Approval Date Photos
Allied Tube & Conduit 1" - 789648
1 ½” - 789650
2" - 789651
3" - 789653
4" - 789655
5/2/14
Cantex 1” – 5144033
1 ½” – 5144035
2” – 5144036
3” – 5144038
4” – 5144040
5/5/03
Heritage Plastics 1” – 610276
1 ½” – 610278
2” – 610279
3” – 610281
4” – 610283
9/26/13
IPEX / Scepter 1” – EJ20
1 ½” – EJ30
2” – EJ35
3” – EJ45
4” – EJ55
9/26/13
Prime Conduit 1” – EC2PC100
1 ½” – EC2PC150
2” – EC2PC200
3” – EC2PC300
4” – EC2PC400
9/26/13

Up arrow 66x80.png Top Return to Approved Materials
Side arrow 80x66.png

HDPE Conduit

Notes Manufacturer Catalog Number Approval Date Photos
Dura-Line 2” – 2SDR135GRY
3” – 3SDR135GRY
3/28/13
Comment:
SDR 13.5 all sizes
Gray color
Smooth outside wall
UV Stabilized

HDPE Electrical Service Conduit

Notes Manufacturer Catalog Number Approval Date Photos
Dura-Line 2” – 2SDR135BLK/RED
3” – 3SDR135BLK/RED
3/8/13
Comment:
SDR 13.5 Black with red stripes
Smooth outside wall
UV Stabilized

Up arrow 66x80.png Top Return to Approved Materials
Side arrow 80x66.png

HDPE Couplings

Notes Manufacturer Catalog Number Approval Date Photos
American Polywater Bonduit Conduit Adhesive
Use with standard Sch 40 PVC Couplings
10/11/10 Cartridge
Equipment
Nozzle
Cabletec HDPE to HDPE Coupling:
AS 2.375 – 2”
AS 3.500 – 3”

HDPE to PVC Coupling:
ASP 2.375 - 2"
ASP 3.500 - 3"
8/2/01


12/22/17
HDPE to HDPE Couplings
2" & 3" Side View
2" Coupling
3" Coupling
Dura-Line HDPE to HDPE Coupling or HDPE to PVC Coupling:
ShurLock Couplings
2" - 20000123
3" - 20000173
7/11/14 Side View
Label View
End View
Georg Fischer/Central Plastics Company HDPE to HDPE Electrofusion Couplings
2” IPS 5760030
3” IPS 10000360
5/5/06

Connector Kits, Fuse Holders and Fuses

Multi-tap Connectors

Notes Manufacturer Catalog Number Approval Date Photos
ABB Installation Products Inc. purchased Thomas & Betts ABB Installation Products Inc. RB 210-8 SL 6/12/17 Top View
Side View
Cable Input
Set Screws

Up arrow 66x80.png Top Return to Approved Materials
Side arrow 80x66.png

Un-Fused Fuse Holders

Notes Manufacturer Catalog Number Approval Date Photos
Ideal Industries purchased Buchanan Ideal Industries / Buchanan Style 20 U Breakaway 5/5/03 Fuse Holder
Line Side
Load Side
Comment:
Single pole in-line non-fused
600 volt, 30 amp
Copper
#10 AWG conductor size

Fused Fuse Holders

Notes Manufacturer Catalog Number Approval Date Photos
Ideal Industries purchased Buchanan Ideal Industries / Buchanan Style 65 U Breakaway 5/5/03 Fuse Holder
Line Side
Load Side
Comment:
Single pole in-line fused
600 volt, 8 amp
Copper
#10 AWG conductor size

Fuses

Notes Manufacturer Catalog Number Approval Date Photos
Bussmann-by Eaton Limitron Type KTK8 5/5/03 Fuse
Label
Ferraz Shawmut ATM8 1/25/02
Littelfuse 0KLK008 7/31/01
Comment:
600 volt, 8 amp

Up arrow 66x80.png Top Return to Approved Materials
Side arrow 80x66.png

Splice Kits in Junction or Service Boxes

Notes Manufacturer Catalog Number Approval Date Photos
Ilsco Waterproof Submersible
PED11-1/0SS-Z - Two Ports
PED21-1/0SS-Z - Three Ports
PED22-1/0SS-Z - Four Ports
11/23/16 2 Ports
3 Ports
4 Ports
NSi Industries/Polaris Waterproof Submersible
ISPBS2/0 - Two Ports (Opposite)
ISPB2/0-2 - Two Ports
ISPB2/0-3 - Three Ports
ISPB2/0-4 - Four Ports
ISPB2/0-6 - Six Ports
ISPB02/0 - Three Ports (2 and 1 Opposite)
9/2/16 Top View
Label
Iso view
Cable Port
ABB Installation Products Inc. owns Thomas & Betts ABB Installation Products Inc. Waterproof Submersible
RAB 1/0-2c - Two Ports
RAB 1/0-3c - Three Ports
RAB 1/0-4c - Four Ports
RAB 1/0-21c - Three Ports (2 and 1 Opposite)
RAB 1/0-32c - Five Ports (3 and 2 Opposite)
4/14/17 Iso View
Plugs
Ports
Parallel Port Back View
Opposite Port Back View

Control Centers

Control Centers (Four-Circuit)

Notes Manufacturer Catalog Number Approval Date Photos
Milbank CP3B91115PAOOP4 4/8/11 Front View
Inside Front
Breaker Panel
Latch
Back View
Ringless Cover
Meter Socket
Myers Electric Products, Inc. MEUG16AR-M100-OPK 7/24/12 Front View
Inside Front
Contactors
Back View
Ringless Cover
Meter Socket
Purchased by Myers 12/10/12 Pacific Utility Products USP16R-M2100-112C-AL-OPK 2/3/11 Front View
Inside Front
Breaker Panel
Latch
Contactors
Back View
Ringless Cover
Meter Socket
Comment:
Ringless meter cover with horn bypass and exposed meter

Control Centers (Single-Circuit)

Notes Manufacturer Catalog Number Approval Date Photos
Milbank Pending approval
Myers Electric Products, Inc. MET2-VLM-LTS-R 7/24/12
Purchased by Myers 12/10/12 Pacific Utility Products USP2R-100-112C-OPK-LT-PM 2/17/12 Front View
Inside Front
Panel
Meter Socket
Base
Latch
Comment:
Ringless meter cover and horn bypass with mounting collar for stand alone unit.

Up arrow 66x80.png Top Return to Approved Materials
Side arrow 80x66.png

Grounding Equipment

Ground Rod

Notes Manufacturer Catalog Number Approval Date Photos
Erico Inc. 615800 2/27/02
Galvan Industries 6260 12/20/13
Hubbell C615800 4/24/12
ABB Installation Products Inc. purchased Thomas & Betts ABB Installation Products Inc. 6260 5/5/03
Comment:
5/8” x 10’-0” long
Copper clad steel core
UL listed

Ground Rod Clamp

Notes Manufacturer Catalog Number Approval Date Photos
Burndy GRC58 – 5/8” 2/27/02
Erico Inc. HDC58 – 5/8” 12/1/05
Galvan Industries SRC – 5/8” 12/20/13
ABB Installation Products Inc. purchased Thomas & Betts ABB Installation Products Inc. JAB58H – 5/8" 5/5/03
Comment:
Hex head set screw
Copper alloy
Long bearing surface
UL listed

Up arrow 66x80.png Top Return to Approved Materials
Side arrow 80x66.png

Junction and Service Boxes

Type 1 Junction Box

Notes Manufacturer Catalog Number Approval Date Photos
Armorcast A6001423 - Box only
A6001422T - Cover only
A6001423TA - Assembly
1/11/01
Highline Product Number Nomenclature
PHB121212 – Box only
CHC1212HL – Cover only
PHA121212HL2 – Assembly
3/3/11 Side View
Top View
Bottom View
Martin Enterprises 121212PCB – Box only
1212PCC – Cover only
121212PC – Assembly
10/17/11 Side View
Top View
Cover
Bolt Hole
New Basis Cover Label
PCB121212-00000 – Box only
PCC121212P1-90006 – Cover only
PCA121212-00150 – Assembly
2/26/02 Side View
Top View
Cover
Bolt Hole
Carson Series H boxes were
purchased by Oldcastle
Oldcastle Part Numbers
12122001 – Box only
12124006 – Synertech Cover only
12121003 w/ 12124006 – Assembly
80002033 hex head bolts if separate
6/5/14 Cover
Quazite was purchased
by Hubbell Power Systems
Quazite PC1212BA12 – Box only
PC1212HA0041 – Cover only
PC1212Z50341 - Assembly
Cover Codes
5/5/03
Comment:
Minimum Box Assembly Rating - Tier 15 (22,500 lbs test load)
Logo to read “Street Lighting”
1 Piece cover to be ¾” thick
Straight wall
No mouseholes
3/8” – 16 NC hex head bolts and washers

Up arrow 66x80.png Top Return to Approved Materials
Side arrow 80x66.png

Type 2 Junction Box

Notes Manufacturer Catalog Number Approval Date Photos
Armorcast A6001429TA - Assembly
A6001428T - Cover only
A6001429 - Box only
7/30/01 Side View
Top View
Bottom View
Highline Product Number Nomenclature
PHB111812 – Box only
CHC1118HL – Cover only
PHA111812HL2 – Assembly
3/3/11 Side View
Top View
Cover
Bottom View
Martin Enterprises 111812PCB – Box only
1118PCC – Cover only
111812PC – Assembly
10/17/11
New Basis Cover Label
PCB111812-00000 – Box only
PCC111812P1-90020 – Cover only
PCA111812-00150 – Assembly
2/26/02 Side View
Top View
Cover
Carson Series H boxes were
purchased by Oldcastle
Oldcastle Part Numbers
11182001 – Box only
11184609 – Cover only
11181611 – Assembly
80002033 hex head bolts if separate
8/29/13 Side View
End View
Cover
Quazite was purchased
by Hubbell Power Systems
Quazite PG1118BA12 – Box only
PG1118HA0041 – Cover only
PG1118Z50941 - Assembly
Cover Codes
5/5/03
Comment:
Minimum Box Assembly Rating - Tier 15 (22,500 lbs test load)
Logo to read “Street Lighting”
1 Piece cover to be 2” thick
Straight wall
No mouseholes
3/8” – 16 NC hex head bolts and washers

Up arrow 66x80.png Top Return to Approved Materials
Side arrow 80x66.png

Lamps

High Pressure Sodium

Notes Manufacturer Catalog Number Approval Date Photos
General Electric Lucalox – HPS lamps

100 W – LU100/ECO/NC – 14673
150 W – LU150/55/ECO/NC – 40390
250 W – LU250/ECO/NC – 14674
400 W – LU400/ECO/NC – 14675

11/4/10
Philips 100 W – C100S54/ALTO/NC – 14740-5
150 W – C150S55/ALTO/NC – 14741-3
250 W – C250S50/ALTO/NC – 14742-1
400 W – C400S51/ALTO/NC – 14743-9
10/14/11
Sylvania Lumalux PLUS/ECO – HPS lamps

100 W – LU100/PLUS/ECO – 67559
150 W – LU150/55/PLUS/ECO – 67494
250 W – LU250/PLUS/ECO – 67572
400 W – LU400/PLUS/ECO – 67312

3/26/08
Comment:
Clear lamp
Mogul base
ECO/ALTO = Low Mercury
NC = Non Cycling
30,000+ Hour Average Life

LED Lamps

Notes Manufacturer Catalog Number Approval Date Photos
Keystone KT-LED36HID-EX39-830-D/G2 11/30/18 LED Closeup
Side View
Top View
Philips Product Number: 47360-3
Order Code: 35ED23.5/LED/730/ND 120-277V G2 4/1
12/5/16 Side View
Top View
Bottom View
Comment:
CCT = 3,000 K
Mogul base
Minimum Lumens = 5,000
100W HPS Replacement

Up arrow 66x80.png Top Return to Approved Materials
Side arrow 80x66.png

Luminaires

HPS Cobra-Head Luminaire

Notes Manufacturer Catalog Number Approval Date Photos
Photometric Curves
150:AE7361-70fg3.ies
250 & 400: AEL12963.ies
American Electric Lighting –
Acuity Brands
31515SCAMT2R3FGM2NRHPAR8663 – 150W HPS

32525SCAMT2R3FGNRHPAR8037 – 250W HPS 32540SCAMT2R3FGNRHPAR8037 – 400W HPS

4/28/05
4/15/05
Photometric Curves
150: GE7285.ies
250 & 400: GE1002.ies or GE7323.ies
General Electric M2AC15S0A1GMC31347 – 150W HPS
MDCA25S0A12FMC31 – 250W HPS
MDCA40S0A12FMC31 – 400W HPS
5/5/03
Photometric Curves
150 & 250: HP03116.ies
400: HP03065.ies
Hubbell RMCD15S38031125F0M53-150W
RMCD25S38031125F0M53-250W
RLCD40S38031125F0M53-400 W
5/5/03
Comment:
2-Bolt slip fitter connection for 150 W fixtures
4-Bolt slip fitter connection large housing for 250 W and 400 W fixtures
Multi-Tap Ballast
Plug-In “Protected” starter
Aluminum wildlife guard
NO PHOTOCELL

HPS Highway Luminaire

Notes Manufacturer Catalog Number Approval Date Photos
Photometric Curve
400W: 452580.ies
General Electric RPFT40S0A1GLN4GR – 400W HPS 5/5/03

Up arrow 66x80.png Top Return to Approved Materials
Side arrow 80x66.png

HPS Residential Post Top

Notes Manufacturer Catalog Number Approval Date Photos
Photometric Curves
100: 42737
Holophane 100W HPS
Type 3: PTU-100HP-MT-B-P3-B-P
Type 5: PTU-100HP-MT-B-P5-B-P
150W HPS
Type 3: PTU-15AHP-MT-B-P3-B-P
2/14/03 Side View
Ballast Door
Internal Components
Reflector
Lamp Socket
Cover Latch
Cover Hinge
Photometric Curves
mpb15s3a – Type 3
mpb15sa – Type 5
Sentry Lighting 100W HPS
Type 3: SLH-100HPS-240-MT-III-PC-BK
Type V: SLH-100HPS-240-MT-V-PC-BK

150W HPS
Type 3: SLH-150HPS-240-MT-III-PC-BK
12/13/16 Side View
Refractor Lens
Internal View
Hinge
Comment:
Multi-Tap Ballast
Mogul base

LED Cobrahead Luminaire

Notes Manufacturer Catalog Number Approval Date Photos
American Electric Lighting Autobahn ATB2

Class A:
Standard Gray Finish:
ATB2-80BLEDE70-MVOLT-R2-IL-P7-SH-RFD210941-RFWD6463
Special Black Finish:
ATB2-80BLEDE70-MVOLT-R2-BK-IL-P7-SH-RFD210942-RFWD6463

IES File: ATB2_80B_LED_E70_XXXXX_R2.ies

Class B
Standard Gray Finish:
ATB2-60BLEDE70-MVOLT-R2-IL-P7-SH-RFD210943-RFWD6463
Special Black Finish:
ATB2-60BLEDE70-MVOLT-R2-BK-IL-P7-SH-RFD210944-RFWD6463

IES File: ATB2_60B_LED_E70_XXXXX_R2.ies

Class C:
Standard Gray Finish:
ATB2-40BLEDE70-MVOLT-R2-IL-P7-SH-RFD210946-RFWD6463
Special Black Finish:
ATB2-40BLEDE70-MVOLT-R2-BK-IL-P7-SH-RFD210947-RFWD6463

IES File: ATB2_40B_LED_E70_XXXXX_R2.ies

Autobahn ATB0
Class D:
Standard Gray Finish:

ATB0-30BLEDE70-MVOLT-R2-IL-P7-SH-RFD210948-RFWD6463
Special Black Finish:
ATB0-30BLEDE70-MVOLT-R2-BK-IL-P7-SH-RFD210950-RFWD6463

IES File: ATB0_30B_LED_E70_XXXXX_R2.ies

Class E:
Standard Gray Finish:

ATB0-20BLEDE70-MVOLT-R2-IL-P7-SH-RFD223679-RFWD6463
Special Black Finish:
ATB0-20BLEDE70-MVOLT-R2-BK-IL-P7-SH-RFD223680-RFWD6463

IES File: ATB0_20B_LED_E70_XXXXX_R2.ies
4/4/13

















4/4/14
Top View

Bottom View
Side View
Back View
Bird Guard
Driver Compartment
Wiring Compartment
Wiring Terminal
Level Bubble
Housing Latch

Comment:
10 Year Warranty
CCT = 4000K
7 Pin twistlock photocel receptacle with shorting cap
Class A is a 400W HPS replacement
Class B is a 310W HPS replacement
Class C is a 250W HPS replacement
Class D is a 150W HPS replacement
Class E is a 100W HPS replacement
Shall have label for class A, B, C, D or E on fixture housing
For design purposes, correct photometric file is listed for each fixture. Download the file from the manufacturer's web page.

LED Residential Post Top Luminaire

Notes Manufacturer Catalog Number Approval Date Photos
Sentry Lighting Class E:
Type 3: SLH-INC1-III-F-AC-BLACK
1/27/17 Side View
Refractor Lens
Hinge
Socket Bracket
Comment:
No Ballast or Starter
Mogul Lamp Socket
Supply with LED Lamp

Photocell

System Photocell

Notes Manufacturer Catalog Number Approval Date Photos
Dark To Light (DTL) DP124-0.2-1826 3/27/13 Top View
Side View
Comment:
120Volt
Turn on at 0.2 Fc
Silicon Chip
30 second delay

Up arrow 66x80.png Top Return to Approved Materials
Side arrow 80x66.png

Poles

Aluminum Poles 30' Mounting Heights

Notes Manufacturer Catalog Number Approval Date Photos
Hapco 27’-6” Poles:
Type OP 301 - Dwg # B84165-001 w/Rev 3 – (1) 6' single member arm
Type OP 301 - Dwg # B84165-002 w/Rev 3 - (1) 8' single member arm

Type OP302 - Dwg # B79636-001 w/Rev 5 - (1) 12' truss type arm
Type OP303 - Dwg # B84165-003 w/ Rev 3 – (2) 8' single member arms
Identification Label:
Dwg # B84166 9-3-03
4/02/14 Base ID
Handhole Chain
Handhole Cover
Internal Rivnuts
External Rivnuts
Vibration Dampner
Valmont 27’-6” Poles:
Type OP301 - Model No. 270645706T4C w/Rev 1 – (1) 6' or 8' single member arm
Type OP302 - Model No. 260860806T4A w/Rev 1 – (1) 12' truss type arm
Type OP303 - Model No. 270645806T4A w/Rev 1 – (2) 8' single member arms
Identification Label:
Dwg # DSOP – ID Tag Detail 9-22-17
4/23/18 Base ID
Handhole Chain
Handhole Cover
Internal Rivnuts
External Rivnuts
Comment:
2013 AASHTO Design
J-hook at top of pole
Handhole cover keeper chain attached to bottom of handhole opening or Hinged handhole option
Grounding screw shaft installed parallel to pole shaft at back side of pole.
Labeled with manufacturer identification tag.
0.188” Wall Thickness
Cable hook at top of pole

Up arrow 66x80.png Top Return to Approved Materials
Side arrow 80x66.png

Aluminum Poles 40' Mounting Heights

Notes Manufacturer Catalog Number Approval Date Photos
Hapco 37’-6” Poles:

Type OP401 - Dwg # 84165-004 w/ Rev 4 - (1) 6' single member arm
Type OP401 - Dwg # 84165-005 w/ Rev 4 – (1) 8' single member arm
Type OP401 - Dwg # 84165-007 w/ Rev 4 - (2) 8' single member arms

Type OP402 - Dwg # B79636-002 w/ Rev 5 – (1) 10' truss type arm
Type OP402 - Dwg # B79636-003 w/ Rev 5 – (1) 12' truss type arm
Type OP402 - Dwg # B79636-004 w/ Rev 5 – (1) 15’ truss type arm

Type OP403 - Dwg # 80061-001 w/ Rev 4 - (1) 12’ & (1) 8’ truss type arms
Type OP403 - Dwg # 80061-002 w/ Rev 4 - (2) 12’ truss type arms
Type OP403 - Dwg # 80061-003 w/ Rev 4 - (2) 15’ truss type arms
Type OP403 - Dwg # 80061-004 w/ Rev 4 - (2) 10' truss type arms

Identification Label:
Dwg # B84166 9-3-03

4/02/14 Base ID
Handhole Chain
Handhole Cover
Internal Rivnuts
External Rivnuts
Vibration Dampner
Valmont 37’-6” Poles:

Type OP401 - Model No. 370645807T4B w/ Rev 1 – (1) 6' or 8' single member arm
Type OP401 - Model No. 370645807T4B w/ Rev 1 - (2) 6' or 8' single member arms
Type OP402 - Model No. 360860807T4E w/ Rev 1 – (1) 10', 12', or 15' single member arm
Type OP403 - Model No. 368060107T4F w/ Rev 1 – (2) 8', 12' or 15' truss type arms
Identification Label:
Dwg # DSOP – ID Tag Detail 9-22-17

4/23/18 Base ID
Handhole Chain
Handhole Cover
Internal Rivnuts
External Rivnuts
Comment:
2013 AASHTO Design
J-hook at top of pole
Handhole cover keeper chain attached to bottom of handhole opening or Hinged handhole option
Grounding screw shaft installed parallel to pole shaft at back side of pole.
Labeled with manufacturer identification tag.
0.219” Wall Thickness

Up arrow 66x80.png Top Return to Approved Materials
Side arrow 80x66.png

Aluminum Street Light Bracket Arms

Notes Manufacturer Catalog Number Approval Date Photos
Hapco Information is Contained on Pole Drawings. 4/02/14 Single Arm
Truss Arm Attachments
Truss Arm Weld
Truss Arm
Valmont Arm Drawings:
Model No. (1) or (2) MA0630B45B w/ Rev 1 – 6’ Single member
Model No. (1) or (2) MA0830B45D w/ Rev 1 – 8’ Single member
Model No. (1) or (2) TA0839B60K w/ Rev 1 – 8’ Truss type
Model No. (1) or (2) TA1039B60K w/ Rev 1 – 10’ Truss type
Model No. (1) or (2) TA1239B60K w/ Rev 1 – 12’ Truss type
Model No. (1) or (2) TA1539B60K w/ Rev 1 – 15’ Truss type
4/23/18 Arm Attachment
External Rivnut View
Internal Rivnut View
Single Arm
Comment:
Supply end cap on lower truss member.
Labeled with identification tag.

Aluminum Poles 14' Mounting Heights

Notes Manufacturer Catalog Number Approval Date Photos
Hapco 14’ Poles:
Type OP14 - Dwg # A66338 w/Rev # 10
Identification Label:
Dwg # B84166 9-3-03
4/02/14
Valmont 14’ Poles:
Type OP14 - Model No. 140030605T4A w/ Rev 1
Identification Label:
Dwg # DSOP – ID Tag Detail 9-22-17
4/23/18 Handhole Cover
Ground Lug
Comment:
2013 AASHTO Design
Handhole cover keeper chain attached to bottom of handhole opening.
Handhole should be smooth and free of burrs.
Grounding screw shaft installed parallel to pole shaft at back side of pole.
Labeled with manufacturer identification tag.
0.156” Wall Thickness

Screw-In Pole Foundations

Notes Manufacturer Catalog Number Approval Date Photos
Hubbell Power Systems is Parent AB Chance T112-0363 – R OP14
T112-0748 – T1 OP301/302/303
T112-02930101 – F1 OP401/402
T112-02940101 – F2 OP403
2/20/06 Base Iso
Base Plate
Helix
Cable Entrance
Dixie/MacLeanPower D-1202-0029-A – R OP14
D-1202-0465-A – T1 OP301/302/303
D-1202-0031-A – F1 OP401/402
D-1202-0032-A – F2 OP403
4/10/13
Earth Contact Products Material Certifications
LPS-66T-048-12 – R OP14
LPS-66T-060-122 – T1 OP301/302/303
LPS-86T-60A-14 – F1 OP401/402
LPS-86T-60B-14 – F2 OP403
10/15/12 Base Iso
Base Plate
Helix
Cable Entrance
JH Botts, Inc. Dwg # JHBOPK-1 w/Rev A 8/20/03 Side View
Conduit Entry
Helix & Pilot Point
Top Plate
Base ID
Pelco SP-3017-KS-GLV – R OP14
SP-3008-KS-GLV – T1 OP301/302/303
SP-3013-KS-GLV – F1 OP401/402
SP-3012-KS-GLV – F2 OP403
7/19/06 Base Iso
Base Plate
Helix
Cable Entrance
Comment:
Manufacturer and foundation identification stenciled on base plate with ¼” to ½” lettering.

Up arrow 66x80.png Top Return to Approved Materials
Side arrow 80x66.png