Approved Materials - Specialty Items

From PPM Wiki - City of Overland Park Projects and Procedures Manual Pages
Jump to navigation Jump to search
Return to Approved Materials
Side arrow 80x66.png


GeekNotesIcon.png Note: This document is provided as a benefit to contractors and suppliers who are bidding projects for the City of Overland Park. Only products identified on this list will be approved for installation on City construction projects. This list shall not be used as a substitute for catalog cuts or material approval. All material approvals shall be submitted on the approved City of Overland Park Contract Project Submittal form. The form is available at City Hall by contacting Bruce Wacker at (913) 895-6027. Failure to comply will be cause for rejection of materials until proper submittals are received. This list is updated periodically. The contractor or supplier shall contact the City of Overland Park to make sure that they have the most current list prior to bidding a project. Failure to do so shall not constitute a legitimate claim for change orders. Before accessing any links, the City recommends that the user delete browsing history to insure the latest catalog cut information is displayed correctly.

Traffic Signal Speciality Items

GeekNotesIcon.png Note: All materials listed on this Specialty Items page are not standard and shall require variance or special permission by the City to incorporate into projects.
The following items should be listed on the Contractor Submittal for Traffic Signals form.

Decorative Signal Poles

Mast Arm Poles

Notes Manufacturer Catalog Number Approval Date Photos Comments
95th St & Nall Ave Valmont Pole: Tapered, 16-Sharp Fluted w/ 2.875” OD x 4” L Tenon
Mast Arm: Smooth Round Tapered
Pole Cap: Standard
Finish/Color: F-306-GG
Metcalf Corridor,
Excluding Downtown Form Based Code Extents
Valmont Pole: Tapered, 16-Sharp Fluted w/ 2.875” OD x 4” L Tenon
Mast Arm: Smooth Round Tapered
Pole Cap: Metro Series
Finish/Color: F-306-B
Metcalf Corridor,
Within Downtown Form Based Code Extents (Inclusive)
Valmont Pole: Tapered, 16-Sharp Fluted w/ 2.875” OD x 4” L Tenon
Mast Arm: Smooth Round Tapered
Pole Cap: Metro Series
Finish/Color: F-306 / RAL 8019 Medium Bronze
Oak Park Mall
Signals along 95th St and Quivira;
95th & Nieman
Valmont Standard pole and mast arm
Pole Cap: Spear Series
Finish/Color: F-306-GG
Comment:
Color Codes:
GG = RAL 6012 OP Green
B = Fed-Std-595 #27038 Black

Up arrow 66x80.png Top Return to Approved Materials
Side arrow 80x66.png

Pedestal Poles

Notes Manufacturer Catalog Number Approval Date Photos Comments
95th St & Nall Ave Valmont Pole: Straight, 16-Flat Fluted Color: RAL 6012 OP Green
Metcalf Corridor,
Excluding Downtown Form Based Code Extents
Valmont Pole: Straight, 16-Flat Fluted
Pole Cap: Metro Series
Finish/Color: Fed-Std-595 #27038 Black
Finish: Powder Coat
Metcalf Corridor,
Within Downtown Form Based Code Extents (Inclusive)
Valmont Pole: Straight, 16-Flat Fluted
Pole Cap: Metro Series
Color: RAL 8019 Medium Bronze
Finish: Powder Coat
Oak Park Mall Signals
along 95th St and Quivira;
95th & Nieman
Valmont 4 ½” dia straight pole
Pole Cap: Spear Series
Color: RAL 6012 OP Green
Finish: Powder Coat
Comment:
Color Codes:
GG = RAL 6012 OP Green
B = Fed-Std-595 #27038 Black

Decorative Bases for Mast Arm Poles

Notes Manufacturer Catalog Number Approval Date Photos Comments
Oak Park Mall Signals
along 95th St and Quivira;
95th & Nieman
Valmont Contour Series
CN20AB, CN27AB & CN34AB
Color: RAL 6012 OP Green
Finish: Powder Coat
95th St & Nall Ave Valmont Washington Series
WA25AB, WA30AB & WA36AB
Color: RAL 6012 OP Green
Finish: Powder Coat
Metcalf Corridor,
Excluding Downtown Form Based Code Extents
Valmont Sterling Series
ST24AB, ST25AB & ST31AB
Color: Fed-Std-595 #27038 Black
Finish: Powder Coat
Metcalf Corridor,
Within Downtown Form Based Code Extents (Inclusive)
Valmont Sterling Series
ST24AB, ST25AB & ST31AB
Color: RAL 8019 Medium Bronze
Finish: Powder Coat
Metcalf Corridor,
Within Downtown Form Based Code Extents (Inclusive)
83rd St, 81st St HAWK/PHB
Valmont Huntington Series
Color: Fed-Std-595 #27038 Black
Finish: Powder Coat

Up arrow 66x80.png Top Return to Approved Materials
Side arrow 80x66.png

Decorative Bases for Pedestrian Poles

Notes Manufacturer Catalog Number Approval Date Photos Comments
Oak Park Mall Signals along
95th St and Quivira;
95th & Nieman
Valmont Contour Series
CN18AB
Color: RAL 6012 OP Green
Finish: Powder Coat
95th & Nall Valmont Washington Series
WA18AB
Color: RAL 6012 OP Green
Finish: Powder Coat
Metcalf Corridor,
Excluding Downtown Form Based Code Extents
Valmont Sterling Series
ST18AB
Color: Fed-Std-595 #27038 Black
Finish: Powder Coat
Metcalf Corridor,
Within Downtown Form Based Code Extents (Inclusive)
Valmont Sterling Series
ST18AB
Color: RAL 8019 Medium Bronze
Finish: Powder Coat
Metcalf Corridor,
Within Downtown Form Based Code Extents (Inclusive)
83rd St, 81st St HAWK/PHB
Valmont Huntington Series
Color: Fed-Std-595 #27038 Black
Finish: Powder Coat
There are non-public model numbers including increased pole wall thicknesses. Have manufacturer provide model number based on loading.

Pedestrian Pushbutton Pole

Pedestrian Pushbutton Pole and Foundation

Notes Manufacturer Catalog Number Approval Date Photos
AB Chance Screw-in-Foundation:
T1121363 / Dwg No. SA1121363
Ped Button Post:
T1121364 / Dwg No. SA1121364
10/21/11
Comment:
Hot dip galvanized finished smooth.

Up arrow 66x80.png Top Return to Approved Materials
Side arrow 80x66.png

Pole Base Cover

Notes Manufacturer Catalog Number Approval Date Photos
Lithonia RSS FBC 3-5IN RND JMA 1751 DNA 1/7/13
Comment:
ABS Plastic. Square base with 3.5” diameter hole.
Two-piece cover – natural aluminum


Streetlighting Speciality Items

GeekNotesIcon.png Note: All materials listed on this Specialty Items page are not standard and shall require variance or special permission by the City to incorporate into projects.
The following items should be listed on the Contractor Submittal for Street Lighting form.

Bollards

Downtown Streetscape

Notes Manufacturer Catalog Number Approval Date Photos
KIM Lighting VRB1-20L4KUV-BL 4/9/20 Bollard

Light Fixtures

Parking Lot Lighting at City Facilities

Notes Manufacturer Catalog Number Approval Date Photos
American Electric Lighting Autobahn ATB2

Class A:
Standard Gray Finish:
None currently installed.
Special Black Finish:
None currently installed.

IES File: ATB2_80B_LED_E70_XXXXX_R#.ies

Class B:
Standard Gray Finish, Type 3 Distribution, 4,000 Kelvin:
ATB2-60BLEDE70-MVOLT-R3-IL-NL-P7-SH-RFD310023
Proposed at Sanders (MR-1883) and Scafe (MR-1882).
Standard Gray Finish, Type 4 Distribution, 4,000 Kelvin:
ATB2-60BLEDE70-MVOLT-R4-IL-NL-P7-SH-RFD310024
Proposed at Sanders (MR-1883) and Scafe (MR-1882).
Special Black Finish:
None currently installed.

IES File: ATB2_60B_LED_E70_XXXXX_R#.ies

Class C:
Standard Gray Finish:
None currently installed.
Special Black Finish:
None currently installed.

IES File: ATB2_40B_LED_E70_XXXXX_R#.ies

Autobahn ATB0
Class D:
Standard Gray Finish:

None currently installed.
Special Black Finish:
None currently installed.

IES File: ATB0_30B_LED_E70_XXXXX_R#.ies

Class E:
Standard Gray Finish:

None currently installed.
Special Black Finish, Type 3 Distribution, 4,000 Kelvin:
ATB0-20BLEDE70-MVOLT-R3-IL-P7-SH-RFD223679-RFWD6463
Installed at Westgate (MR-1762).

IES File: ATB0_20B_LED_E70_XXXXX_R#.ies
Approved as part of project plans. Top View

Bottom View
Side View
Back View
Bird Guard
Driver Compartment
Wiring Compartment
Wiring Terminal
Level Bubble
Housing Latch

Comment:
10 Year Warranty.
CCT = Varies.
Light distribution optic type = Varies.
7 Pin twistlock photocell receptacle with shorting cap.
For design purposes, correct photometric file is listed for each fixture. Download the file from the manufacturer's web page.
Shall have specialty label based on LED class, light distribution type, and kelvin on fixture housing. Sticker label shall read:
XTY
ZK
Where X = LED Class (A, B, C, D, E); Y = Light Distribution Type (2, 3, 4); and Z = Kelvin, in thousands (3, 4).

Antioch & I-435 Bridge Decorative Fixture

Notes Manufacturer Catalog Number Approval Date Photos
Bega 8189P-Blk-120 w/ GE 12870 Fluorescent lamp 7/21/04
Comment:
120 Volt, Black, Fluorescent lamp

110th Street & Lamar Roundabout Decorative Fixture

Notes Manufacturer Catalog Number Approval Date Photos
Gardco Lighting Gullwing #G18-1-2XL-400-MH-240-BLP 4/26/02
Comment:
Type II Distribution, 400W MH, Blackp

Up arrow 66x80.png Top Return to Approved Materials
Side arrow 80x66.png

110th & Lamar Roundabout Landscape Fixture

Notes Manufacturer Catalog Number Approval Date Photos
Hydrel 4710A-175M-120-SP-ISSDLA-BZ 4/26/02
Comment:
175W MH, Bronze

Antioch & I-435 Bicycle Tunnel Light Fixture
Indian Creek Bicycle Trail under I-435

Notes Manufacturer Catalog Number Approval Date Photos
Photometric Curve
LTL16011
Holophane W4-100HP-MC-S-Z-F2 9/2/08
Comment:
100W HPS, Dark Bronze, Type IV Distribution

133rd & Lamar; 132nd Street & US-69 Overpass; Vineyards and Mills Farm Roundabouts

Notes Manufacturer Catalog Number Approval Date Photos
These are for replacement
of existing heads only.
This fixture is no longer approved.
Architectural Area Lighting PRMSH3150HPS-Mogul-240MT-BLK-06A-1814 Sleeve 8/28/06
Comment:
Promenade – Black
Mogul base lamp and reflector system

Photometric curve
PRM3-H2-150HPS.IES

Matt Ross Community Center Parking Lot Fixture

Notes Manufacturer Catalog Number Approval Date Photos
Wide Lite/
Genlyte Company
Optra Area Luminaire
Symmetric Distribution:
OPP-250-S-QV-SR-SA
Asymmetric Distribution:
OPP-250-A-QV-SR-SA
3/16/06
Comment:
250W MH
Segmented reflector with vertical lamp
Multi-tap ballast
Satin Aluminum finish
Arm mount to round pole

Up arrow 66x80.png Top Return to Approved Materials
Side arrow 80x66.png

Downtown OP

Notes Manufacturer Catalog Number Approval Date Photos
Sentry SGO-150HPS-240V-MT-III-BK (No Finial)
IES File: SGO-150HPS-III
5/5/03

95th St & Nall Ave;
71st St & Metcalf Ave;
75th St & Metcalf Ave;
87th St & Metcalf Ave

Notes Manufacturer Catalog Number Approval Date Photos Comments
This fixture is no
longer being manufactured.
KIM Lighting KIM Era Lantern
1A/LET26SCH3/400HPS240/**
HA33L-TM1/HF2/HAF2

This has to be a tenon mount
because of the fluted signal pole shaft
1/26/09 Single Top Mounted, Single Curved Arm,
400W HPS, 240V, Type III Distribution
TM!= Tenon Mount Ribbon Arm
HF2/ HAF2 = Two Finials
** = Custom Color
RAL 6012 (Hunter Green)
BL (Black FED-STD-595 #27038)

79th St & Metcalf Ave

Notes Manufacturer Catalog Number Approval Date Photos
This fixture is no
longer being manufactured.
KIM Lighting KIM Era Lantern
1A/LET26SCH3/250HPS240/**/BF
HA33L/**/HAF2

This does not require a tenon because
the pole is not fluted.
2/26/13
Comment:
Single Top Mounted
Single Curved Arm
250W HPS, 240V, Type III Distribution
HAF2 - Finial on the top arm stud
** - Custom Color
RAL 8019 Dark Bronze

Up arrow 66x80.png Top Return to Approved Materials
Side arrow 80x66.png

159th Street Bridge Over US-69 Highway

Notes Manufacturer Catalog Number Approval Date Photos
This fixture is no
longer being manufactured.
KIM Lighting KIM Era Lantern
FM/LEB26SCH3/400HPS240/**/TF
Should accommodate 4.5” top pole O.D. w/ 0.188” wall
12/13/10
Comment:
Post Top Flush Mounted
Single Curved Arm
Top Finial
400W HPS, 240V, Type III Distribution
** BL (Black FED-STD-595 #27038)

127th Street (Metcalf Ave to Nall Ave)

Notes Manufacturer Catalog Number Approval Date Photos
This fixture is no
longer being manufactured.
KIM Lighting KIM Era Lantern
2B/LET26SCH3/250HPS240/**/BF
Twin Bracket Arms @ 180 degrees
2B/HA33L/HAF2
12/13/10
Comment:
Twin Top Mounted
Single Curved Arm
Bottom Finial
250W HPS, 240V, Type III Distribution
Ribbon Arm w/ top finial
** BL (Black FED-STD-595 #27038)

95th St: Quivira Rd to Nieman Rd

Notes Manufacturer Catalog Number Approval Date Photos
KIM Lighting KIM Warp 9 HPS – Single w/2” slipfitter for Type A or B arm
1A/WP9LM3/400HPS240/CC/HSF/TB
8/2/09
Comment:
400W HPS, 240V
Type III Distribution
CC - Custom Color (RAL 6012 Hunter Green)

Up arrow 66x80.png Top Return to Approved Materials
Side arrow 80x66.png

Quivira Road: 95th St. to 99th St.

Notes Manufacturer Catalog Number Approval Date Photos
KIM Lighting KIM Warp 9 HPS – Twin Std Arms
2B/WP9LM3/400HPS240/CC/TB
KIM Warp 9 HPS – Single Std Arm
1A/WP9LM3/250HPS240/CC/TB
8/2/09
Comment:
250W or 400W HPS, 240V
Type III Distribution
CC - Custom Color (RAL 6012 Hunter Green)

Light Poles

110th Street & Roundabout Square Pole

Notes Manufacturer Catalog Number Approval Date Photos
Gardco Lighting #SSS 30-5-11-BLP 4/26/02
Comment:
5” square, straight, steel - Black

Community Center (Downtown) Parking Lot Pole

Notes Manufacturer Catalog Number Approval Date Photos
KW Industries RSP18-4.0-11-NA-DM10-BC 3/21/06
Comment:
Round Steel
Satin Aluminum finish
Arm mount option

Up arrow 66x80.png Top Return to Approved Materials
Side arrow 80x66.png

Decorative Poles for Downtown OP and 132nd Street Bridge over US-69 Highway

Notes Manufacturer Catalog Number Approval Date Photos
Hapco Dwg No. C19043 – 8/3/10 8/5/10 Base
Handhole
Bolt Cover
Comment:
Nylon hand hole screws

Special Pole for 159th Street Bridge over US-69 Highway

Notes Manufacturer Catalog Number Approval Date Photos
Hapco Dwg No. SKKP110211B -1 11/2/11 11/11/11
Valmont Dwg No. LH30800 – 10/17/11 11/1/11
Comment:
Shaft Length is 29’-3” or 39’-3” as specified
Color: Black FED-STD-595 #27038 or Hunter Green # RAL 6012

Special Pole for Era Lantern Bolt Pattern 127th St (Metcalf to Nall)

Notes Manufacturer Catalog Number Approval Date Photos
Hapco OP301-LANTERN
Dwg No. SKKP110211A-001 –Single
Dwg No. SKKP110211A-002 – Twin
OP401-LANTERN
Dwg No. SKKP012011A-001 –Single
Dwg No. SKKP012011A-002 – Twin
Pole Cap & Finial – F0004
11/11/11
Valmont OP301-LANTERN
OP401-LANTERN
11/2/11
Comment:
Shaft Length is 29’-3” or 39’-3” as specified
Pole Cap & Finial
Color: Black FED-STD-595 #27038 or Hunter Green # RAL 6012

Up arrow 66x80.png Top Return to Approved Materials
Side arrow 80x66.png

Special Pole for Warp9 Bolt Pattern Quivira Rd (99th to 95th)

Notes Manufacturer Catalog Number Approval Date Photos
Hapco OP301-WARP
Dwg No. SKKP110211C-001 – Single
Dwg No. SKKP110211C-002 – Twin
OP401-WARP
Dwg No SKKP013111A-001 – Single
Dwg No SKKP013111A-002 – Twin
11/11/11
Valmont OP301-WARP
OP401-WARP
11/2/11
Comment:
Shaft Length is 29’-3” or 39’-3” as specified
Color: Black FED-STD-595 #27038 or Hunter Green # RAL 6012

Special Screw-In Foundations

Screw-In Foundations for Downtown OP Pole

Notes Manufacturer Catalog Number Approval Date Photos
AB Chance T112-03631701
Dwg No. SA11203631701 Rev A
8/5/10
Comment:
Used with Hapco Decorative Pole