Difference between revisions of "Approved Materials - Signing"

From PPM Wiki - City of Overland Park Projects and Procedures Manual Pages
Jump to navigation Jump to search
(75 intermediate revisions by 2 users not shown)
Line 89: Line 89:
|
|
|The Work Zone, Inc.
|The Work Zone, Inc.
|5052H38 aluminum
|
|
|
|
|
Line 176: Line 176:
|[[media:TRF PQL PS MEM SouthernMfg IlluminatedStNameSign.pdf|10/29/08]]
|[[media:TRF PQL PS MEM SouthernMfg IlluminatedStNameSign.pdf|10/29/08]]
|[[media:TRF PQL PS PHOT SouthernMfg IlluminatedStNameSign Front.JPG|Front View]]<br>[[media:TRF PQL PS PHOT SouthernMfg IlluminatedStNameSign Back.JPG|Back View]]<br>[[media:TRF PQL PS PHOT SouthernMfg IlluminatedStNameSign End.JPG|End View]]<br>[[media:TRF PQL PS PHOT SouthernMfg IlluminatedStNameSign Driver.JPG|LED Driver]]<br>[[media:TRF PQL PS PHOT SouthernMfg IlluminatedStNameSign LEDStrip.JPG|LED Light Bar]]<br>[[media:TRF PQL PS PHOT SouthernMfg IlluminatedStNameSign Hasp.JPG|Hasp]]<br>[[media:TRF PQL PS PHOT SouthernMfg IlluminatedStNameSign Hinge.JPG|Hinge]]<br>[[media:TRF PQL PS PHOT SouthernMfg IlluminatedStNameSign Terminal.JPG|Terminal Block]]<br>[[media:TRF PQL PS PHOT SouthernMfg IlluminatedStNameSign Fuse.JPG|Fuse]]<br>[[media:TRF PQL PS PHOT SouthernMfg IlluminatedStNameSign Sheeting.JPG|Sheeting]]
|[[media:TRF PQL PS PHOT SouthernMfg IlluminatedStNameSign Front.JPG|Front View]]<br>[[media:TRF PQL PS PHOT SouthernMfg IlluminatedStNameSign Back.JPG|Back View]]<br>[[media:TRF PQL PS PHOT SouthernMfg IlluminatedStNameSign End.JPG|End View]]<br>[[media:TRF PQL PS PHOT SouthernMfg IlluminatedStNameSign Driver.JPG|LED Driver]]<br>[[media:TRF PQL PS PHOT SouthernMfg IlluminatedStNameSign LEDStrip.JPG|LED Light Bar]]<br>[[media:TRF PQL PS PHOT SouthernMfg IlluminatedStNameSign Hasp.JPG|Hasp]]<br>[[media:TRF PQL PS PHOT SouthernMfg IlluminatedStNameSign Hinge.JPG|Hinge]]<br>[[media:TRF PQL PS PHOT SouthernMfg IlluminatedStNameSign Terminal.JPG|Terminal Block]]<br>[[media:TRF PQL PS PHOT SouthernMfg IlluminatedStNameSign Fuse.JPG|Fuse]]<br>[[media:TRF PQL PS PHOT SouthernMfg IlluminatedStNameSign Sheeting.JPG|Sheeting]]
|-
|
|[http://www.templeedgelit.com/ Temple Edge-Lit]
|[[media:TRF PQL CAT TempleEdge-Lit IlluminatedStreetNameSign.pdf|18" x 72": FLP1872<br>18" x 96": FLP1896<br>24" x 72": FLP2472<br>24" x 96": FLP2496<br>24" x 120": FLP24120]]
|[[media:TRF PQL MEM TempleEdge-Lit IlluminatedStreetNameSign.pdf|11/15/19]]
|[[media:TRF PQL PHOT TempleEdge-Lit IlluminatedStreetNameSign Front.JPG|Front View]]<br>[[media:TRF PQL PHOT TempleEdge-Lit IlluminatedStreetNameSign Side.JPG|Side View]]<br>[[media:TRF PQL PHOT TempleEdge-Lit IlluminatedStreetNameSign CableEntry.JPG|Cable Entry]]<br>[[media:TRF PQL PHOT TempleEdge-Lit IlluminatedStreetNameSign Hinge.JPG|Hinge]]<br>[[media:TRF PQL PHOT TempleEdge-Lit IlluminatedStreetNameSign Latch.JPG|Latch]]<br>[[media:TRF PQL PHOT TempleEdge-Lit IlluminatedStreetNameSign LEDBar.JPG|LED Light Bar]]<br>[[media:TRF PQL PHOT TempleEdge-Lit IlluminatedStreetNameSign Driver.JPG|Driver]]
|}
|}
{{PQLNote|Legend:<br>LE &#x003D; Standard LED Sign<br>X &#x003D; Sign Width (4, 5, 6, 7, 8, 9, or 10 ft)<br>ZZ &#x003D; Sign Height (19 or 24 inches)<br>S &#x003D; Single Sided Sign<br>B &#x003D; Rigid Mount Top and Bottom<br>A &#x003D; Tri-stud Punch Pattern<br>N &#x003D; Mounting Brackets are Not Included with Sign<br>N &#x003D; No Photocell<br>AA &#x003D; Monarch Black<br> D &#x003D; Diamond Grade Translucent ASTM Type XI Retroreflective Sheeting<br>1 &#x003D; Green EC Film Background<br>Font: Emod 2000 8"UC/6"LC}}
{{PQLNote|Legend:<br><u>For Southern Manufacturing</u><br>LE &#x003D; Standard LED Sign<br>X &#x003D; Sign Width (4, 5, 6, 7, 8, 9, or 10 ft)<br>ZZ &#x003D; Sign Height (19 or 24 inches)<br>S &#x003D; Single Sided Sign<br>B &#x003D; Rigid Mount Top and Bottom<br>A &#x003D; Tri-stud Punch Pattern<br>N &#x003D; Mounting Brackets are Not Included with Sign<br>N &#x003D; No Photocell<br>AA &#x003D; Monarch Black<br> D &#x003D; Diamond Grade Translucent ASTM Type XI Retroreflective Sheeting<br>1 &#x003D; Green EC Film Background<br>Font: Emod 2000 8"UC/6"LC}}
{{PQLReturn}}
{{PQLReturn}}


Line 192: Line 198:
|
|
|[https://www.pelcoinc.com/ Pelco]
|[https://www.pelcoinc.com/ Pelco]
|AG-0142-CTC-LL_SS_PXX
|[[media:TRF PQL PS CAT Pelco TrafficSignMastArmBracket.pdf|AG-0142-CTC-LL_SS_PXX]]
|4/19/19
|[[media:TRF PQL PS MEM Pelco TrafficSignMastArmMountingBracket.pdf|4/19/19]]
|[[media:TRF PQL TS PHOT Pelco MastArmMountingBracket Hinge.JPG|Open Hinge View]]<br>[[media:TRF PQL TS PHOT Pelco MastArmMountingBracket TopView.JPG|Top View]]<br>[[media:TRF PQL TS PHOT Pelco MastArmMountingBracket SideView.JPG|Side View]]
|[[media:TRF PQL TS PHOT Pelco MastArmMountingBracket Hinge.JPG|Open Hinge View]]<br>[[media:TRF PQL TS PHOT Pelco MastArmMountingBracket TopView.JPG|Top View]]<br>[[media:TRF PQL TS PHOT Pelco MastArmMountingBracket SideView.JPG|Side View]]
|-
|-
|A Division<br>of Olson<br>Aluminum<br>Castings
|
|[http://www.skybracket.com/index.php Sky Bracket]
|[http://www.skybracket.com/index.php Sky Bracket]
|SS-SBLL-SBK-XXTK-YY<br>[[media:TRF PQL PS CAT SkyBracket StandardBracket.pdf|Standard Bracket]]<br>[[media:TRF PQL PS CAT SkyBracket TubeKit.pdf|Tube Kit]]<br>[[media:TRF PQL PS CAT SkyBracket 8inSignKit.pdf|8" Sign Kit]]<br>[[media:TRF PQL PS CAT SkyBracket 14inSignKit.pdf|14" Sign Kit]]<br>[[media:TRF PQL PS CAT SkyBracket 23inSignKit.pdf|23" Sign Kit]]<br>[[media:TRF PQL PS CAT SkyBracket OverheadStreetNameSignBracket Schematic.pdf|Bracket Schematic]]
|SS-SBLL-SBK-XXTK-YY<br>[[media:TRF PQL PS CAT SkyBracket StandardBracket.pdf|Standard Bracket]]<br>[[media:TRF PQL PS CAT SkyBracket TubeKit.pdf|Tube Kit]]<br>[[media:TRF PQL PS CAT SkyBracket 8inSignKit.pdf|8" Sign Kit]]<br>[[media:TRF PQL PS CAT SkyBracket 14inSignKit.pdf|14" Sign Kit]]<br>[[media:TRF PQL PS CAT SkyBracket 23inSignKit.pdf|23" Sign Kit]]<br>[[media:TRF PQL PS CAT SkyBracket OverheadStreetNameSignBracket Schematic.pdf|Bracket Schematic]]
Line 203: Line 209:
|}
|}


{{PQLNote|Stainless steel banding/cable and hardware<br>For signs longer than 102", use two mounting bracket kits with shorter tubes.<br>Don't exceed sign area of 2,000 square inches per clamp kit.<br><u>For Pelco:</u><br>Required cable length (LL) to be determined by contractor based on manufacturer's recommendation as follows:<br>62" – for mast arm diameters ranging from 2” to 7”<br>84" – for mast arm diameters ranging from 7.1” to 10.5”<br>96" – for mast arm diameters ranging from 10.6” to 12.4”<br>110" – for mast arm diameters ranging from 12.5” to 14.6”<br>120" – for mast arm diameters ranging from 14.7” to 16.2”<br>132" – for mast arm diameters ranging from 16.3” to 18.2”<br>Tube Length (CTC) varies. See the cut sheet to determine size based on the length of sign.<br>Color (XX) shall be as follows:<br>NC - No Color<br>33 - Glossy Black<br>71 - RAL6012 Green<br>39 - RAL8019 Dark Bronze<br>
{{PQLNote|Stainless steel banding/cable and hardware<br><u>For Pelco:</u><br>Tube Length Center to Center (CTC) varies. See the cut sheet to determine size based on the length of sign.<br>Required cable length (LL) to be determined by contractor based on manufacturer's recommendation as follows:<br>62" – for mast arm diameters ranging from 2” to 7”<br>84" – for mast arm diameters ranging from 7.1” to 10.5”<br>96" – for mast arm diameters ranging from 10.6” to 12.4”<br>110" – for mast arm diameters ranging from 12.5” to 14.6”<br>120" – for mast arm diameters ranging from 14.7” to 16.2”<br>132" – for mast arm diameters ranging from 16.3” to 18.2”<br>Color (XX) shall be as follows:<br>NC - No Color<br>33 - Glossy Black<br>71 - RAL6012 Green<br>39 - RAL8019 Dark Bronze<br>
<u>For Sky Bracket:</u><br>Required banding length (LL) to be determined by contractor based on manufacturer's recommendation as follows:<br>29” – for mast arm diameters ranging from 2” to 7”<br>42” – for mast arm diameters ranging from 8” to 11”<br>59” – for mast arm diameters ranging from 12” to 17”<br>Tube Length (XX) varies. Use the longest that will fit the sign and cut off excess (18", 24", 46", 60", 74" or 96")<br>Channel Length (YY) and number varies. Use longest channel that will not exceed sign size (8", 14", or 23")<br>2 channels for 18" to 46" tubes<br>3 channels for 60" to 74" tubes <br>4 channels for 96" tubes<br>If other than standard color, specify SB-BLK for Black Powder Coat or SP-SPL for Special Color Powder Coat}}
<u>For Sky Bracket:</u><br>Required banding length (LL) to be determined by contractor based on manufacturer's recommendation as follows:<br>29” – for mast arm diameters ranging from 2” to 7”<br>42” – for mast arm diameters ranging from 8” to 11”<br>59” – for mast arm diameters ranging from 12” to 17”<br>Tube Length (XX) varies. Use the longest that will fit the sign and cut off excess (18", 24", 46", 60", 74" or 96")<br>Channel Length (YY) and number varies. Use longest channel that will not exceed sign size (8", 14", or 23")<br>2 channels for 18" to 46" tubes<br>3 channels for 60" to 74" tubes <br>4 channels for 96" tubes<br>For signs longer than 102", use two mounting bracket kits with shorter tubes.<br>Don't exceed sign area of 2,000 square inches per clamp kit.<br>If other than standard color, specify SB-BLK for Black Powder Coat or SP-SPL for Special Color Powder Coat}}


=== Overhead Street Name Sign Mast Arm Brackets ===
=== Overhead Street Name Sign Mast Arm Brackets ===
Line 215: Line 221:
| align="center" style="background:#f0f0f0;"|'''Photos'''
| align="center" style="background:#f0f0f0;"|'''Photos'''
|-
|-
|A Division<br>of Olson<br>Aluminum<br>Castings
|
|[https://www.pelcoinc.com/ Pelco Inc.]
|[[media:TRF PQL PS CAT Pelco OverheadStreetNameSignBracket.pdf|AG-0144-CTC-LL-SS-PXX]]
|[[media:TRF PQL PS MEM Pelco OverheadStreetNameSignMountingBracket.pdf|8/6/19]]
||[[media:TRF PQL TS PHOT Pelco MastArmMountingBracket Hinge.JPG|Open Hinge View]]<br>[[media:TRF PQL TS PHOT Pelco MastArmMountingBracket TopView.JPG|Top View]]<br>[[media:TRF PQL TS PHOT Pelco MastArmMountingBracket SideView.JPG|Side View]]
|-
|
|[http://www.skybracket.com/index.php Sky Bracket]
|[http://www.skybracket.com/index.php Sky Bracket]
|SS-SBLL-SBK-XXTK-YY<br>[[media:TRF PQL PS CAT SkyBracket StandardBracket.pdf|Standard Bracket]]<br>[[media:TRF PQL PS CAT SkyBracket TubeKit.pdf|Tube Kit]]<br>[[media:TRF PQL PS CAT SkyBracket 14inSignKit.pdf|14" Sign Kit]]<br>[[media:TRF PQL PS CAT SkyBracket 23inSignKit.pdf|23" Sign Kit]]<br>[[media:TRF PQL PS CAT SkyBracket OverheadStreetNameSignBracket Schematic.pdf|Bracket Schematic]]
|SS-SBLL-SBK-XXTK-YY<br>[[media:TRF PQL PS CAT SkyBracket StandardBracket.pdf|Standard Bracket]]<br>[[media:TRF PQL PS CAT SkyBracket TubeKit.pdf|Tube Kit]]<br>[[media:TRF PQL PS CAT SkyBracket 14inSignKit.pdf|14" Sign Kit]]<br>[[media:TRF PQL PS CAT SkyBracket 23inSignKit.pdf|23" Sign Kit]]<br>[[media:TRF PQL PS CAT SkyBracket OverheadStreetNameSignBracket Schematic.pdf|Bracket Schematic]]
Line 223: Line 235:
|}
|}


{{PQLNote|Stainless steel banding and hardware<br>Required banding length (LL) to be determined by contractor based on manufacturer's recommendation as follows:<br>29” – for mast arm diameters ranging from 2” to 7”<br>42” – for mast arm diameters ranging from 8” to 11”<br>59” – for mast arm diameters ranging from 12” to 17”<br>Tube Length (XX) varies. Use the longest that will fit the sign and cut off excess (18", 24", 46", 60", 74" or 96")<br>For signs longer than 102", use two mounting bracket kits with shorter tubes.<br>Channel Length (YY) and number varies. Use longest channel that will not exceed sign size (8", 14", or 23")<br>2 channels for 18" to 46" tubes<br>3 channels for 60" to 74" tubes <br>4 channels for 96" tubes<br>Don't exceed sign area of 2,000 square inches per clamp kit<br>If other than standard color, specify SB-BLK for Black Powder Coat or SP-SPL for Special Color Powder Coat}}
{{PQLNote|Stainless steel banding/cable and hardware<br><u>For Pelco:</u><br>Center to Center Distance (CTC): See Table on catalog cut based on sign size<br>Required Cable Length (LL) to be determined by contractor based on manufacturer's recommendations as follows:<br>62" – for mast arm diameters ranging from 2” to 7”<br>84" – for mast arm diameters ranging from 7.1” to 10.5”<br>96" – for mast arm diameters ranging from 10.6” to 12.4”<br>110" – for mast arm diameters ranging from 12.5” to 14.6”<br>120" – for mast arm diameters ranging from 14.7” to 16.2”<br>132" – for mast arm diameters ranging from 16.3” to 18.2”<br>Color (XX) shall be as follows:<br>NC - No Color<br>33 - Glossy Black<br>71 - RAL6012 Green<br>39 - RAL8019 Dark Bronze<br>
<u>For Sky Bracket:</u><br>Required banding length (LL) to be determined by contractor based on manufacturer's recommendation as follows:<br>29” – for mast arm diameters ranging from 2” to 7”<br>42” – for mast arm diameters ranging from 8” to 11”<br>59” – for mast arm diameters ranging from 12” to 17”<br>Tube Length (XX) varies. Use the longest that will fit the sign and cut off excess (18", 24", 46", 60", 74" or 96")<br>For signs longer than 102", use two mounting bracket kits with shorter tubes.<br>Channel Length (YY) and number varies. Use longest channel that will not exceed sign size (8", 14", or 23")<br>2 channels for 18" to 46" tubes<br>3 channels for 60" to 74" tubes <br>4 channels for 96" tubes<br>Don't exceed sign area of 2,000 square inches per clamp kit<br>If other than standard color, specify SB-BLK for Black Powder Coat or SP-SPL for Special Color Powder Coat}}


=== Illuminated Street Name Sign Brackets ===
=== Illuminated Street Name Sign Brackets ===
Line 234: Line 247:
| align="center" style="background:#f0f0f0;"|'''Photos'''
| align="center" style="background:#f0f0f0;"|'''Photos'''
|-
|-
|A Division<br>of Olson<br>Aluminum<br>Castings
|For Use with <br>Southern Manufacturing Signs
|[https://www.pelcoinc.com/ Pelco Products]
|[[media:TRF PQL TS CAT Pelco IlluminatedStreetNameSignBracket.pdf|AG-0125-1-LL-SS-PXX]]
|[[media:TRF PQL TS MEM Pelco IlluminatedStreetNameSignBracket.pdf|8/7/19]]
|
|-
|For Use with <br>Southern Manufacturing Signs
|[http://www.skybracket.com/index.php Sky Bracket]
|[http://www.skybracket.com/index.php Sky Bracket]
|SS-SBLL-TS-37<br>[[media:TRF PQL PS CAT SkyBracket IlluminatedStNameSignUpperBracket.PDF|Upper Bracket Arm]]<br>[[media:TRF PQL PS CAT SkyBracket IlluminatedStNameSignLowerBracket.PDF|Lower Bracket Arm]]
|SS-SBLL-TS-37<br>[[media:TRF PQL PS CAT SkyBracket IlluminatedStNameSignUpperBracket.PDF|Upper Bracket Arm]]<br>[[media:TRF PQL PS CAT SkyBracket IlluminatedStNameSignLowerBracket.PDF|Lower Bracket Arm]]
|[[media:TRF PQL PS MEM SkyBracket IlluminatedStNameSignBracket.pdf|1/16/19]]
|[[media:TRF PQL PS MEM SkyBracket IlluminatedStNameSignBracket.pdf|1/16/19]]
|
|-
|Four Use with<br>Temple Edge-Lit Signs
|[http://www.skybracket.com/index.php Sky Bracket]
|[[media:TRF PQL PS CAT SkyBracket IlluminatedStNameSignTempleBracket.PDF|SBLL-ISM]]
|[[media:TRF PQL PS MEM SkyBracket TempleIlluminatedSignBracket.pdf|11/25/19]]
|
|
|}
|}
{{PQLNote|Stainless steel banding and hardware<br>Required banding length (LL) to be determined by contractor based on manufacturer's recommendation as follows:<br>29” – for mast arm diameters ranging from 2” to 7”<br>42” – for mast arm diameters ranging from 8” to 11”<br>59” – for mast arm diameters ranging from 12” to 17”<br>If other than standard color, specify SB-BLK for Black Powder Coat or SP-SPL for Special Color Powder Coat}}
{{PQLNote|Stainless steel banding/cable and hardware<br><u>For Pelco:</u><br>Required cable length (LL) to be determined by contractor based on manufacturer's recommendations as follows:<br>62" – for mast arm diameters ranging from 2” to 7”<br>84" – for mast arm diameters ranging from 7.1” to 10.5”<br>96" – for mast arm diameters ranging from 10.6” to 12.4”<br>110" – for mast arm diameters ranging from 12.5” to 14.6”<br>120" – for mast arm diameters ranging from 14.7” to 16.2”<br>132" – for mast arm diameters ranging from 16.3” to 18.2”<br>Color (XX) shall be as follows:<br>NC - No Color<br>33 - Glossy Black<br>71 - RAL6012 Green<br>39 - RAL8019 Dark Bronze<br><u>For Sky Bracket:</u><br>Required banding length (LL) to be determined by contractor based on manufacturer's recommendation as follows:<br>29” – for mast arm diameters ranging from 2” to 7”<br>42” – for mast arm diameters ranging from 8” to 11”<br>59” – for mast arm diameters ranging from 12” to 17”<br>If other than standard color, specify SB-BLK for Black Powder Coat or SP-SPL for Special Color Powder Coat}}


=== Wing Mounting Brackets ===
=== Wing Mounting Brackets ===
Line 394: Line 419:
|-
|-
|
|
|[http://www.band-it-idex.eu/en/products/Band%20%26%20Buckle/Ear-Lokt%20Buckles.html Band-It]
|[https://www.band-it-idex.com/en/ Band-It]
|[[media:TRF PQL PS CAT Band-It SteelBandingBuckle.pdf|C25699]]
|[[media:TRF PQL PS CAT Band-It SteelBandingBuckle.pdf|C25699]]
|[[media:TRF PQL PS MEM Band-It SteelBandingBuckle.pdf|8/3/07]]
|[[media:TRF PQL PS MEM Band-It SteelBandingBuckle.pdf|8/3/07]]
Line 455: Line 480:
|
|
|[http://www.impactrecovery.com/ Impact Recovery Systems]
|[http://www.impactrecovery.com/ Impact Recovery Systems]
|[[media:TRF PQL PS CAT ImpactRecoverySystems ParkingLotSignPost.pdf|No Sign: SS4Y-42-SP]]
|[[media:TRF PQL PS CAT ImpactRecoverySystems ParkingLotSignPost.pdf|No Sign: SS4Y-42-SP-102]]
|[[media:TRF PQL PS MEM ImpactRecoverySystems ParkingLotSignBollard.pdf|5/10/17]]
|[[media:TRF PQL PS MEM ImpactRecoverySystems ParkingLotSignBollard.pdf|5/10/17]]
|[[media:TRF PQL PS PHOT ImpactRecoverySystems ParkingLotSignPost Adapter&Post.jpg|Adapter & Post]]<br>[[media:TRF PQL PS PHOT ImpactRecoverySystems ParkingLotSignPost Elastomer.jpg|Elastomer]]<br>[[media:TRF PQL PS PHOT ImpactRecoverySystems ParkingLotSignPost Base.jpg|Base]]<br>[[media:TRF PQL PS PHOT ImpactRecoverySystems ParkingLotSignPost Assembly.jpg|Assembly]]
|[[media:TRF PQL PS PHOT ImpactRecoverySystems ParkingLotSignPost Adapter&Post.jpg|Adapter & Post]]<br>[[media:TRF PQL PS PHOT ImpactRecoverySystems ParkingLotSignPost Elastomer.jpg|Elastomer]]<br>[[media:TRF PQL PS PHOT ImpactRecoverySystems ParkingLotSignPost Base.jpg|Base]]<br>[[media:TRF PQL PS PHOT ImpactRecoverySystems ParkingLotSignPost Assembly.jpg|Assembly]]
Line 461: Line 486:


|}
|}
{{PQLNote|Fill bollard with concrete per manufacturer's recommendation}}
{{PQLNote|Sign post length shall be 102" in length<br>Fill bollard with concrete per manufacturer's recommendation}}


== Posts and Anchors ==
== Posts and Anchors ==
Line 570: Line 595:
|
|
|[http://trafficalm.com/ TraffiCalm Systems]
|[http://trafficalm.com/ TraffiCalm Systems]
|Controller: M75-SA300-CTLX<br>Collaborator: M75-SA300-CLBX
|[[media:TRF PQL PS CAT TrafiCalm RRFBController.pdf|Controller: M75-SA300-CTLX<br>Collaborator: M75-SA300-CLBX]]
|[[media:TRF PQL PS MEM TrafiCalm RRFB.pdf|1/9/19]]
|[[media:TRF PQL PS MEM TrafiCalm RRFB.pdf|1/9/19]]
|[[media:TRF PQL PS PHOT TraffiCalm RRFB SolarPanel.JPG|Solar Panel Front View]]<br>[[media:TRF PQL PS PHOT TraffiCalm RRFB Controller.JPG|Solar Panel Back View]]
|[[media:TRF PQL PS PHOT TraffiCalm RRFB SolarPanel.JPG|Solar Panel Front View]]<br>[[media:TRF PQL PS PHOT TraffiCalm RRFB Controller.JPG|Solar Panel Back View]]
Line 632: Line 657:
|-
|-
|
|
|[http://www.pedsafety.com/4-evr-pedestrian-button/ Campbell Co]
|[https://www.pedsafety.com/ Campbell Co]
|[[media:TRF PQL TS CAT CampbellCo PedestrianPushbuttons.pdf|4EVR 120 – X – No LED]]
|[[media:TRF PQL TS CAT CampbellCo PedestrianPushbuttons.pdf|4EVR 120 – X – No LED]] w/ [[media:TRF PQL TS CAT CampbellCo PedestrianPushbuttonCup.pdf|Button Cup]]
|[[media:TRF PQL TS MEM CampbellCo PedestrianPushbuttons.pdf|4/5/12]]
|[[media:TRF PQL TS MEM CampbellCo PedestrianPushbuttons.pdf|4/5/12]]
|
|
|-
|-
|
|
|[http://www.polara.com/bdspecifications.php Polara Engineering, Inc.]
|[http://www.polara.com/bdspecifications.php Polara Engineering, Inc.]
|[[media:TRF PQL TS CAT PolaraEngineeringInc PedestrianPushbuttons.pdf|Bulldog Series<br>Push Button Assembly – BDSP-010-X<br>Pole Mount Adaptor  – BDPM-X]]
|[[media:TRF PQL TS CAT PolaraEngineeringInc PedestrianPushbuttons.pdf|Bulldog Series<br>Push Button Assembly – BDSP-010-X<br>Pole Mount Adaptor  – BDPM-X]]
Line 772: Line 796:


== School Zone Flashers ==
== School Zone Flashers ==
=== Master Radio Assembly ===
=== Radio Installations ===
{| width="800px" border="1" cellpadding="4" cellspacing="0" style="border:\#c9c9c9 1px solid; margin: 1em 1em 1em 0; border-collapse: collapse;"
{| width="800px" border="1" cellpadding="4" cellspacing="0" style="border:\#c9c9c9 1px solid; margin: 1em 1em 1em 0; border-collapse: collapse;"
|+
|+
Line 783: Line 807:
|
|
|[http://www.rtc-traffic.com/index.html RTC  Manufacturing, Inc.]
|[http://www.rtc-traffic.com/index.html RTC  Manufacturing, Inc.]
|Master Radio Assembly –<br>RTC#501676F<br>Master Radio Only RTC #300650A
|<u>Master Radio</u><br>Assembly: RTC#501676F<br>Master Radio Only: RTC #300650A<br><br><u>Remote Radio</u><br>RTC #300600
|9/15/10
|9/15/10
|
|
|}
|}
{{PQLNote|Assembly installs in traffic signal cabinet and consists of:<br>Ethernet LAN Assembly Serial Port Server, Power Supplies, Cables, 6dB Omni Antenna & 50ft Lead<br>Every installation requires one Master and two Remote radios (See below)}}
{{PQLNote|Used only when access to a traffic signal cabinet is available<br>The master assembly installs in traffic signal cabinet and consists of: Ethernet LAN Assembly Serial Port Server, Power Supplies, Cables, 6dB Omni Antenna & 50ft Lead<br>The remote radio installs in the beacon cabinet<br>Every installation requires one Master and two Remote radios (See below)}}


=== Remote Radio ===
=== Modem Installations ===
{| width="800px" border="1" cellpadding="4" cellspacing="0" style="border:\#c9c9c9 1px solid; margin: 1em 1em 1em 0; border-collapse: collapse;"
{| width="800px" border="1" cellpadding="4" cellspacing="0" style="border:\#c9c9c9 1px solid; margin: 1em 1em 1em 0; border-collapse: collapse;"
|+
|+
Line 800: Line 824:
|
|
|[http://www.rtc-traffic.com/index.html RTC  Manufacturing, Inc.]
|[http://www.rtc-traffic.com/index.html RTC  Manufacturing, Inc.]
|RTC #300600
|[[media:TRF PQL PS CAT RTCManufacturing FlashingSchoolBeacon Modem.pdf|RTC M2MTSC]]
|9/15/10
|[[media:TRF PQL PS MEM RTCManufacturing FlashingSchoolBeacon Modem.pdf|6/4/19]]
|
|
|}
|}
{{PQLNote|Only used with Master Radio Assembly installations<br>Installs at beacon assembly.}}
{{PQLNote|Not used with Master Radio Assembly installations<br> Equipment consists of cable slide on bracket and antenna<br>Installs at beacon assembly}}


=== Surge Protector Polyphaser ===
=== Surge Protector Polyphaser ===
Line 818: Line 842:
|[http://www.rtc-traffic.com/index.html RTC  Manufacturing, Inc.]
|[http://www.rtc-traffic.com/index.html RTC  Manufacturing, Inc.]
|[[media:TRF PQL PS CAT RTCManufacturing FlashingSchoolBeacon Polyphaser.pdf|IS-50NX-C2]]
|[[media:TRF PQL PS CAT RTCManufacturing FlashingSchoolBeacon Polyphaser.pdf|IS-50NX-C2]]
|9/15/10
|[[media:TRF PQL PS MEM RTCManufacturing FlashingSchoolBeacon Polyphaser.pdf|9/15/10]]
|
|
|}
|}
Line 834: Line 858:
|
|
|[http://www.rtc-traffic.com/index.html RTC Manufacturing, Inc.]
|[http://www.rtc-traffic.com/index.html RTC Manufacturing, Inc.]
|[[media:TRF PQL PS CAT RTC SchoolBeaconTimeSwitch.pdf|RTC AP-22 #503644]]
|[[media:TRF PQL PS CAT RTC SchoolBeaconTimeSwitch.pdf|RTC AP-22]]
|[[media:TRF PQL PS MEM RTC SchoolBeaconTimeSwitch.pdf|9/15/10]]
|[[media:TRF PQL PS MEM RTC SchoolBeaconTimeSwitch.pdf|9/15/10]]
|[[media:TRF PQL PS PHOT RTC SchoolBeaconTimeSwitch FrontView.JPG|Front View]]<br>[[media:TRF PQL PS PHOT RTC SchoolBeaconTimeSwitch EndView.JPG|End View]]
|[[media:TRF PQL PS PHOT RTC SchoolBeaconTimeSwitch FrontView.JPG|Front View]]<br>[[media:TRF PQL PS PHOT RTC SchoolBeaconTimeSwitch EndView.JPG|End View]]
|}
|}
{{PQLNote|Installs at beacon assembly.<br>Includes antenna and CPC  Harness}}
{{PQLNote|Required for both radio and modem installations<br>Installs at beacon assembly<br>Includes antenna and CPC  Harness}}


=== Yellow Ball LED ===
=== Yellow Ball LED ===
Line 857: Line 881:
|
|
|[http://www.gelighting.com/LightingWeb/na/solutions/transportation-lighting/index.jsp GE]
|[http://www.gelighting.com/LightingWeb/na/solutions/transportation-lighting/index.jsp GE]
|
|[[media:TRF PQL PS CAT GE DCYellowLED.pdf|DR6-YTFB-23B]]
|
|[[media:TRF PQL PS MEM GE DCYellowLED.pdf|5/5/03]]
|
|
|-
|-
Line 879: Line 903:
|-
|-
|
|
|Automatic Signal / Eagle Signal
|[http://www.econolite.com/index.php/products/signals/ Econolite Control Products, Inc.]
|SA101A1111YBB – 1 Section
|<u>Yellow Body:</u><br>[[media:TRF PQL TS CAT Econolite VehiclularSignalHead.pdf|TP11VJC2P0H0 for 1 Section]]<br><br><u>Black Body:</u><br>[[media:TRF PQL TS CAT Econolite VehiclularSignalHead.pdf|TP11VJF2P0H0 for 1 Section]]
|5/5/03
|[[media:TRF PQL TS MEM Econolite VehiclularSignalHead.pdf|5/9/03]]
|[[media:TRF PQL TS PHOT Econolite VehiclularSignalHead FrontView.jpg|Front View]]<br>[[media:TRF PQL TS PHOT Econolite VehiclularSignalHead Back.JPG|Back View]]<br>[[media:TRF PQL TS PHOT Econolite VehiclularSignalHead Body.JPG|Open Front View]]<br>[[media:TRF PQL TS PHOT Econolite VehiclularSignalHead WiringTerminals.JPG|Wiring Terminals]]<br>[[media:TRF PQL TS PHOT Econolite VehiclularSignalHead Latch.jpg|Latch]]
|-
|
|[http://www.mccain-inc.com/traffic.html McCain Traffic Supply]
|<u>Yellow Body:</u><br>[[media:TRF PQL TS CAT McCain VehiclularSignalHead.pdf|M22167-P for 1 Section]]<br><br><u>Black Body:</u><br>[[media:TRF PQL TS CAT McCain VehiclularSignalHead.pdf|M22168-P for 1 Section]]<br><br>[[media:TRF PQL TS CAT McCain VehicularSignalVisor.pdf|M19271 Black Poly Visors]]
|[[media:TRF PQL TS CAT McCain VehicularSignalVisor.pdf|5/14/13]]
|[[media:TRF PQL TS PHOT McCain VehiclularSignalHead Body.JPG|Open Front View]]<br>[[media:TRF PQL TS PHOT McCain VehiclularSignalHead WiringTerminal.JPG|Wiring Terminal]]<br>[[media:TRF PQL TS PHOT McCain VehiclularSignalHead SideView.JPG|Side View]]<br>[[media:TRF PQL TS PHOT McCain VehiclularSignalHead Latch.JPG|Latch]]<br>[[media:TRF PQL TS PHOT McCain VehiclularSignalHead Label.JPG|Label]]
|-
|
|[http://www.mobotrexmanufacturing.com/products/ Mobotrex / Eagle Signal]
|<u>Yellow Body</u><br>[[media:TRF PQL TS CAT Mobotrex-Eagle VehicularSignalHead.pdf|SA101A1111YBB – 1 Section]]
|[[media:TRF PQL TS MEM Mobotrex-Eagle VehicularSignalHead.pdf|5/5/03]]
|
|-
|
|[https://www.peektraffic.com/index.php Peek Traffic]
|<u>Yellow Body</u><br>[[media:TRF PQL TS CAT Peek VehicularSignalHead.pdf|PSS81S001FO for 1 Section]]<br><br><u>Black Body</u><br>[[media:TRF PQL TS CAT Peek VehicularSignalHead.pdf|PSS81E001FO for 1 Section]]
|[[media:TRF PQL TS MEM Peek VehicularSignalHead.pdf|5/5/03]]
|
|
|}
|}
Line 895: Line 937:
|-
|-
|
|
|Gades Sales
|[http://www.mobotrexmanufacturing.com/products/ Mobotrex / Eagle Signal]
|UKS-1452Y / PDM-405
|<u>Assembly w/ two brackets:</u><br> UKS-1452Y<br><u>Single Brackets:</u><br>Yellow - PDM-05443-02<br>Black - PDM-05443-03
|5/5/03
|5/5/03
|
|-
|
|[https://www.pelcoinc.com/ Pelco Products, Inc.]
|[[media:TRF PQL PS CAT Pelco FlashingSchooBeacon SignalBracket.pdf|SE-0567-PNC]]
|[[media:TRF PQL PS MEM Pelco FlashingSchoolBeacon SignalBracket.pdf|6/4/19]]
|
|
|}
|}
Line 909: Line 957:
| align="center" style="background:#f0f0f0;"|'''Approval Date'''
| align="center" style="background:#f0f0f0;"|'''Approval Date'''
| align="center" style="background:#f0f0f0;"|'''Photos'''
| align="center" style="background:#f0f0f0;"|'''Photos'''
|-
|
|[https://www.americansolarwholesale.com/ American Solar Wholesale]
|ASW-30
|6/4/19
|
|-
|-
|
|
Line 916: Line 970:
|
|
|}
|}
{{PQLNote|80 Watt w/ mounting brackets}}


=== Solar Flasher Panel ===
=== Flasher Panel ===
{| width="800px" border="1" cellpadding="4" cellspacing="0" style="border:\#c9c9c9 1px solid; margin: 1em 1em 1em 0; border-collapse: collapse;"
{| width="800px" border="1" cellpadding="4" cellspacing="0" style="border:\#c9c9c9 1px solid; margin: 1em 1em 1em 0; border-collapse: collapse;"
|+
|+
Line 929: Line 982:
|
|
|[http://www.rtc-traffic.com/ RTC Manufacturing, Inc.]
|[http://www.rtc-traffic.com/ RTC Manufacturing, Inc.]
|502598TFA
|<u>For Radio Installations:</u><br>502598TFA<br><br><u>For Modem Installations:</U><br>502598SWG
|5/5/03
|5/5/03
|
|
Line 950: Line 1,003:
|
|
|}
|}
{{PQLNote|Used with radio model only<br>12-Volt, Solid State, w/ LED indicators<br>DC 2-Circuit Flasher<br>8-Pin Octal Base }}
{{PQLNote|Only used with Master Radio Assembly installations<br>12-Volt, Solid State, w/ LED indicators<br>DC 2-Circuit Flasher<br>8-Pin Octal Base }}


=== Solar Cabinet ===
=== Flasher Cabinet ===
{| width="800px" border="1" cellpadding="4" cellspacing="0" style="border:\#c9c9c9 1px solid; margin: 1em 1em 1em 0; border-collapse: collapse;"
{| width="800px" border="1" cellpadding="4" cellspacing="0" style="border:\#c9c9c9 1px solid; margin: 1em 1em 1em 0; border-collapse: collapse;"
|+
|+
Line 963: Line 1,016:
|
|
|[http://www.rtc-traffic.com/ RTC Manufacturing, Inc.]
|[http://www.rtc-traffic.com/ RTC Manufacturing, Inc.]
|RTC-503568
|[[media:TRF PQL PS CAT RTCManufacturing FlashingSchoolBeacon Cabinet.pdf|RTC-503333HBK]]
|5/5/03
|[[media:TRF PQL PS MEM RTCManufacturing FlashingSchoolBeacon Cabinet.pdf|6/4/19]]
|
|
|}
|}
Line 995: Line 1,048:
|-
|-
|
|
|Gades Sales
|[http://componentproducts.com/ Component Products, Inc]
|15’ Pedestal Pole
|[[media:TRF PQL TS CAT ComponentProducts PedestalPoleBase.pdf|Square Pedestal Base: CPI-BAS-1-P]]<br>[[media:TRF PQL TS CAT ComponentProducts PedestalPoleCap.pdf|Pole Cap: CPI-APC-1]]<br>[[media:TRF PQL TS CAT ComponentProducts PedestalPoleShaft.pdf|15’ Pedestal Pole: CPI-AP-15-40]]<br>[[media:TRF PQL TS CAT ComponentProducts PedestalPoleCollar.pdf|Base Collar: CPI-RBC-1]]
|5/5/03
|[[media:TRF PQL TS MEM ComponentProducts PedestalPole&Base.pdf|4/24/14]]
|[[media:TRF PQL TS PHOT ComponentProducts PedestalPoleBase.jpg|Base]]
|-
|
|[http://www.gadestraffic.com/ Gades Sales]
|[[media:TRF PQL TS CAT GadesSales PedestalPoleBase.pdf|Square Pedestal Base: PB-5335-1S-GL-PNC]]<br>[[media:TRF PQL TS CAT GadesSales PedestalPoleCap.pdf|Pole Cap: PB-5402-PNC]]<br>[[media:TRF PQL TS CAT GadesSales PedestalPoleShaft.pdf|15’ Pedestal Pole: PB5100-15-PNC]]<br>[[media:TRF PQL TS CAT GadesSales PedestalPoleCollar.pdf|Base Collar: PB-5325-PNC]]
|[[media:TRF PQL TS MEM GadesSales PedestalPole&Base.pdf|4/24/14]]
|[[media:TRF PQL TS PHOT GadesSales PedestrianPoleBase Side.jpg|Side View]]<br>[[media:TRF PQL TS PHOT GadesSales PedestrianPoleBase Bottom.jpg|Bottom View]]<br>[[media:TRF PQL TS PHOT GadesSales PedestrianPoleBase PipeThreads.jpg|Threaded Opening]]<br>[[media:TRF PQL TS PHOT GadesSales PedestrianPoleBase Cover.jpg|Cover]]
|-
|
|
|[http://www.pelcoinc.com/ Pelco Products, Inc.]
|[[media:TRF PQL TS CAT Pelco PedestalPoleBase.pdf|Square Pedestal Base: PB-5335-1S-GL-PNC]]<br>[[media:TRF PQL TS CAT Pelco PedestalPoleCap.pdf|Pole Cap: PB-5402-PNC]]<br>[[media:TRF PQL TS CAT Pelco PedestalPoleShaft.pdf|15’ Pedestal Pole: PB-5100-15-PNC]]<br>[[media:TRF PQL TS CAT Pelco PedestalPoleCollar.pdf|Base Collar: PB-5325-PNC]]
|[[media:TRF PQL TS MEM Pelco PedestalPole&Base.pdf|4/23/14]]
|[[media:TRF PQL TS PHOT Pelco PedestalPole&Base.jpg|Base]]<br>[[media:TRF PQL TS PHOT Pelco PedestalPoleBase&Collar.JPG|Base & Collar]]
|}
|}
{{PQLReturn}}
{{PQLReturn}}
Line 1,019: Line 1,084:
|-
|-
|
|
|[http://www.3m.com/3M/en_US/company-us/all-3m-products/~/3M-Diamond-Grade-DG-Reflective-Sheeting-Series-4000?N=5002385+8709322+8710677+8710896+8711017+8711331+8711719+8718957+8719050+3294571690&rt=rud 3M]
|[https://www.3m.com/3M/en_US/company-us/all-3m-products/?N=5002385+8709322+8710677+8710896+8711017+3294857497&rt=r3 3M]
|[[media:TRF PQL PS CAT 3M DG3SignSheeting.pdf|Diamond Grade Cube Corner (DG3 Series):<br>White: 4090<br>Yellow: 4091<br>Red: 4092<br>Blue: 4095<br>Green: 4097<br>Fluorescent Yellow: 4081<br>Fluorescent Yellow-Green: 4083<br>Fluorescent Orange: 4084]]
|[[media:TRF PQL PS CAT 3M DG3SignSheeting.pdf|Diamond Grade Cube Corner (DG3 Series):<br>White: 4090<br>Yellow: 4091<br>Red: 4092<br>Blue: 4095<br>Green: 4097<br>Fluorescent Yellow: 4081<br>Fluorescent Yellow-Green: 4083<br>Fluorescent Orange: 4084]]
|[[media:TRF PQL PS MEM 3M DG3SignSheeting.pdf|6/23/05]]
|[[media:TRF PQL PS MEM 3M DG3SignSheeting.pdf|6/23/05]]
Line 1,043: Line 1,108:
|-
|-
|
|
|[http://solutions.3m.com/wps/portal/3M/en_US/NA_roadway/safety/productcatalog/~/3M-ElectroCut-Film-Punched-Series-1170C?N=7566298+7584153+3294099695+8694413&rt=rud#variantView 3M]
|[https://www.3m.com/3M/en_US/company-us/all-3m-products/?N=5002385+8709322+8710677+8710896+8711017+3294857497&rt=r3 3M]
|[[media:TRF PQL PS CAT 3M ElectroCuttableFilm.pdf|Yellow: EC Series 1171<br>Red: EC Series 1172<br>Orange:  EC Series 1174<br>Blue: EC Series 1175<br>Green: EC Series 1177<br>Brown: EC Series 1179<br>Black: EC Series 1178]]
|[[media:TRF PQL PS CAT 3M ElectroCuttableFilm.pdf|Yellow: EC Series 1171<br>Red: EC Series 1172<br>Orange:  EC Series 1174<br>Blue: EC Series 1175<br>Green: EC Series 1177<br>Brown: EC Series 1179<br>Black: EC Series 1178]]
|[[media:TRF PQL PS MEM 3M ElectroCuttableFilm.pdf|5/5/03]]
|[[media:TRF PQL PS MEM 3M ElectroCuttableFilm.pdf|5/5/03]]
|
|
|}
|}
=== Flexible Sheeting for Traffic Signal Pushbutton Posts ===
=== Flexible Sheeting for Traffic Signal Pushbutton Posts ===
{| width="800px" border="1" cellpadding="4" cellspacing="0" style="border:\#c9c9c9 1px solid; margin: 1em 1em 1em 0; border-collapse: collapse;"
{| width="800px" border="1" cellpadding="4" cellspacing="0" style="border:\#c9c9c9 1px solid; margin: 1em 1em 1em 0; border-collapse: collapse;"
Line 1,058: Line 1,124:
|-
|-
|
|
|[http://www.3m.com/3M/en_US/company-us/all-3m-products/~/3M-Diamond-Grade-DG-Reflective-Sheeting-Series-4000?N=5002385+8709322+8710677+8710896+8711017+8711331+8711719+8718957+8719050+3294571690&rt=rud 3M]
|[https://www.3m.com/3M/en_US/company-us/all-3m-products/?N=5002385+8709322+8710677+8710896+8711017+3294857497&rt=r3 3M]
|[[media:TRF_PQL_TS_CAT_3M_Series3910.pdf|Flexible Work Zone Sheeting:<br>White: 3910<br>Fluorescent Yellow: 3911]]
|[[media:TRF_PQL_TS_CAT_3M_Series3910.pdf|Flexible Work Zone Sheeting:<br>White: 3910<br>Fluorescent Yellow: 3911]]
|TBD
|[[media:TRF_PQL_TS_MEM_3M_Series3910.pdf|1/14/2020]]
|
|
|}
|}
{{PQLNote|Fluorescent Yellow shall only be used on traffic signal pushbuttons posts located in medians.
{{PQLNote|Fluorescent Yellow shall only be used on traffic signal pushbutton posts located in medians.
}}
}}
{{PQLReturn}}
{{PQLReturn}}

Revision as of 14:10, 14 January 2020

Return to Approved Materials
Side arrow 80x66.png

Contractor Submittal Forms

GeekNotesIcon.png Note: This document is provided as a benefit to contractors and suppliers who are bidding projects for the City of Overland Park. Only products identified on this list will be approved for installation on City construction projects. This list shall not be used as a substitute for catalog cuts or material approval. All material approvals shall be submitted on the approved City of Overland Park Contract Project Submittal form. The form is available at City Hall by contacting Bruce Wacker at (913) 895-6027. Failure to comply will be cause for rejection of materials until proper submittals are received. This list is updated periodically. The contractor or supplier shall contact the City of Overland Park to make sure that they have the most current list prior to bidding a project. Failure to do so shall not constitute a legitimate claim for change orders. Before accessing any links, the City recommends that the user delete browsing history to insure the latest catalog cut information is displayed correctly.


Aluminum Sign Blanks

Standard Signs

Notes Manufacturer Catalog Number Approval Date Photos
Hall Sign
Lyle Sign, Inc.
National Sign
Newman
The Work Zone, Inc.
Vulcan Sign
Comment:
0.080” Thick
5052H38 or 6061-T6 aluminum alloy

Overhead Street Name Signs

Notes Manufacturer Catalog Number Approval Date Photos
Hall Sign
Lyle Sign, Inc.
National Sign
Newman
The Work Zone, Inc.
Vulcan Sign
Comment:
0.125” Thick
5052H38 or 6061-T6 aluminum alloy

Up arrow 66x80.png Top Return to Approved Materials
Side arrow 80x66.png

Blank-Out Signs

Notes Manufacturer Catalog Number Approval Date Photos
Nova Tech LLC is the
sales representative
M-Systems, Inc. Spec Sheet
R10-11
R10-11b
1/12/09 Sign Face
Comment:
R10-11: 24” x 30” or 36" x 48" (See MUTCD), No Turn on Red "Ball" - White text with “Red Ball” symbol
R10-11b: 36" x 36", No Turn on Red - White text
Front Lens: Complete blank out when "Off"
Single row LED

Cable for Illuminated Street Name Signs & Blank-out Signs

Sign Power Cable

Notes Manufacturer Catalog Number Approval Date Photos
Advanced Digital Cable 8103 10/23/08
Falcon Fine Wire 980314X19-1 11/6/08 Jacket Label
Comment:
1-3c#14 AWG
Stranded Copper IMSA 19-1

Up arrow 66x80.png Top Return to Approved Materials
Side arrow 80x66.png

Driver Feedback Signs

Notes Manufacturer Catalog Number Approval Date Photos
TrafficCalm Systems M75-012SE-000x
x = Sign Face Color
1 = White
2 = Fluorescent Yellow-Green
3 = Fluorescent Orange
4 = Yellow
6/21/18
Comment:
Location as determined by the City of Overland Park
White Sign, Solar Power, 20W Panel
Universal Mounting Bracket & Pole Mount Plate

Illuminated Street Name Signs

Notes Manufacturer Catalog Number Approval Date Photos
Southern Manufacturing/
Accord Industries
LEXZZSBRYNAAD1: Standard Number Format
LE619SBRYNAAD1: 6’ x 19”
LE819SBANNAAD1: 8’ x 19”
LE624SBANNAAD1: 6’x 24”
LE824SBANNAAD1: 8’ x 24”
10/29/08 Front View
Back View
End View
LED Driver
LED Light Bar
Hasp
Hinge
Terminal Block
Fuse
Sheeting
Temple Edge-Lit 18" x 72": FLP1872
18" x 96": FLP1896
24" x 72": FLP2472
24" x 96": FLP2496
24" x 120": FLP24120
11/15/19 Front View
Side View
Cable Entry
Hinge
Latch
LED Light Bar
Driver
Comment:
Legend:
For Southern Manufacturing
LE = Standard LED Sign
X = Sign Width (4, 5, 6, 7, 8, 9, or 10 ft)
ZZ = Sign Height (19 or 24 inches)
S = Single Sided Sign
B = Rigid Mount Top and Bottom
A = Tri-stud Punch Pattern
N = Mounting Brackets are Not Included with Sign
N = No Photocell
AA = Monarch Black
D = Diamond Grade Translucent ASTM Type XI Retroreflective Sheeting
1 = Green EC Film Background
Font: Emod 2000 8"UC/6"LC

Up arrow 66x80.png Top Return to Approved Materials
Side arrow 80x66.png

Mounting Brackets

Traffic Sign Mast Arm Brackets

Notes Manufacturer Catalog Number Approval Date Photos
Pelco AG-0142-CTC-LL_SS_PXX 4/19/19 Open Hinge View
Top View
Side View
Sky Bracket SS-SBLL-SBK-XXTK-YY
Standard Bracket
Tube Kit
8" Sign Kit
14" Sign Kit
23" Sign Kit
Bracket Schematic
1/16/19 Shown with previously approved cable mounting system.
Front View
Back View
Side View
Sign Channel
Comment:
Stainless steel banding/cable and hardware
For Pelco:
Tube Length Center to Center (CTC) varies. See the cut sheet to determine size based on the length of sign.
Required cable length (LL) to be determined by contractor based on manufacturer's recommendation as follows:
62" – for mast arm diameters ranging from 2” to 7”
84" – for mast arm diameters ranging from 7.1” to 10.5”
96" – for mast arm diameters ranging from 10.6” to 12.4”
110" – for mast arm diameters ranging from 12.5” to 14.6”
120" – for mast arm diameters ranging from 14.7” to 16.2”
132" – for mast arm diameters ranging from 16.3” to 18.2”
Color (XX) shall be as follows:
NC - No Color
33 - Glossy Black
71 - RAL6012 Green
39 - RAL8019 Dark Bronze

For Sky Bracket:
Required banding length (LL) to be determined by contractor based on manufacturer's recommendation as follows:
29” – for mast arm diameters ranging from 2” to 7”
42” – for mast arm diameters ranging from 8” to 11”
59” – for mast arm diameters ranging from 12” to 17”
Tube Length (XX) varies. Use the longest that will fit the sign and cut off excess (18", 24", 46", 60", 74" or 96")
Channel Length (YY) and number varies. Use longest channel that will not exceed sign size (8", 14", or 23")
2 channels for 18" to 46" tubes
3 channels for 60" to 74" tubes
4 channels for 96" tubes
For signs longer than 102", use two mounting bracket kits with shorter tubes.
Don't exceed sign area of 2,000 square inches per clamp kit.
If other than standard color, specify SB-BLK for Black Powder Coat or SP-SPL for Special Color Powder Coat

Overhead Street Name Sign Mast Arm Brackets

Notes Manufacturer Catalog Number Approval Date Photos
Pelco Inc. AG-0144-CTC-LL-SS-PXX 8/6/19 Open Hinge View
Top View
Side View
Sky Bracket SS-SBLL-SBK-XXTK-YY
Standard Bracket
Tube Kit
14" Sign Kit
23" Sign Kit
Bracket Schematic
1/16/19 Showing previously approved cable mounting system.
Bracket Front View
Bracket Back View
Sign Support Channel
Comment:
Stainless steel banding/cable and hardware
For Pelco:
Center to Center Distance (CTC): See Table on catalog cut based on sign size
Required Cable Length (LL) to be determined by contractor based on manufacturer's recommendations as follows:
62" – for mast arm diameters ranging from 2” to 7”
84" – for mast arm diameters ranging from 7.1” to 10.5”
96" – for mast arm diameters ranging from 10.6” to 12.4”
110" – for mast arm diameters ranging from 12.5” to 14.6”
120" – for mast arm diameters ranging from 14.7” to 16.2”
132" – for mast arm diameters ranging from 16.3” to 18.2”
Color (XX) shall be as follows:
NC - No Color
33 - Glossy Black
71 - RAL6012 Green
39 - RAL8019 Dark Bronze

For Sky Bracket:
Required banding length (LL) to be determined by contractor based on manufacturer's recommendation as follows:
29” – for mast arm diameters ranging from 2” to 7”
42” – for mast arm diameters ranging from 8” to 11”
59” – for mast arm diameters ranging from 12” to 17”
Tube Length (XX) varies. Use the longest that will fit the sign and cut off excess (18", 24", 46", 60", 74" or 96")
For signs longer than 102", use two mounting bracket kits with shorter tubes.
Channel Length (YY) and number varies. Use longest channel that will not exceed sign size (8", 14", or 23")
2 channels for 18" to 46" tubes
3 channels for 60" to 74" tubes
4 channels for 96" tubes
Don't exceed sign area of 2,000 square inches per clamp kit
If other than standard color, specify SB-BLK for Black Powder Coat or SP-SPL for Special Color Powder Coat

Illuminated Street Name Sign Brackets

Notes Manufacturer Catalog Number Approval Date Photos
For Use with
Southern Manufacturing Signs
Pelco Products AG-0125-1-LL-SS-PXX 8/7/19
For Use with
Southern Manufacturing Signs
Sky Bracket SS-SBLL-TS-37
Upper Bracket Arm
Lower Bracket Arm
1/16/19
Four Use with
Temple Edge-Lit Signs
Sky Bracket SBLL-ISM 11/25/19
Comment:
Stainless steel banding/cable and hardware
For Pelco:
Required cable length (LL) to be determined by contractor based on manufacturer's recommendations as follows:
62" – for mast arm diameters ranging from 2” to 7”
84" – for mast arm diameters ranging from 7.1” to 10.5”
96" – for mast arm diameters ranging from 10.6” to 12.4”
110" – for mast arm diameters ranging from 12.5” to 14.6”
120" – for mast arm diameters ranging from 14.7” to 16.2”
132" – for mast arm diameters ranging from 16.3” to 18.2”
Color (XX) shall be as follows:
NC - No Color
33 - Glossy Black
71 - RAL6012 Green
39 - RAL8019 Dark Bronze
For Sky Bracket:
Required banding length (LL) to be determined by contractor based on manufacturer's recommendation as follows:
29” – for mast arm diameters ranging from 2” to 7”
42” – for mast arm diameters ranging from 8” to 11”
59” – for mast arm diameters ranging from 12” to 17”
If other than standard color, specify SB-BLK for Black Powder Coat or SP-SPL for Special Color Powder Coat

Wing Mounting Brackets

Notes Manufacturer Catalog Number Approval Date Photos
Hall Signs 24” - #800: Item Id: 400-016000 8/3/07
Lyle Signs, Inc. AL-13 8/3/07
Tapco Inc. 24” - #800: 037-00015 7/3/14
Comment:
A380 Alloy

Round Pole Mounting Bracket

Notes Manufacturer Catalog Number Approval Date Photos
Band-It Flared Leg Bracket, Stainless Steel Bolt, Washer and Fiber Washer: D02199 8/3/07 Top View
Side View
It Straps On, Inc. Flared Leg Bracket w/ SS Bolt & SS Washer: SB021
Provide plastic washer separately
8/3/07
ITW Strapbinder Flared Leg Bracket w/ SS Bolt and Plastic Washer: ST021
Provide stainless steel washer separately
8/3/07
MD Solutions Flared Leg Bracket, Stainless Steel Bolt, Washer and Plastic Washer: PLUS+4SS 11/9/17 Flared Leg Bracket
Parts
PermaBand Flared Leg Bracket w/ SS Bolt & SS Washer: PMB02150
Plastic Washer: PMP00350
5/1/17 Flared Leg Bracket
Top View
Side View
Bolt
Plastic Washer
TAPCO, Inc. Bracket: 035-00008
SS Bolt: 035-00010
Nylon Washer: 052-00295
Provide stainless steel washer separately
8/3/07
Xcessories Squared Flared Leg Bracket w/ SS Bolt and Plastic Washer: XST021
Provide stainless steel washer separately
4/13/16
Comment:
One Stainless Steel 5/16"-18 x 3/4" Bolt
Flared Leg
Stainless steel and plastic washers shall be provided separately if not listed

Up arrow 66x80.png Top Return to Approved Materials
Side arrow 80x66.png

Sign Banding

Notes Manufacturer Catalog Number Approval Date Photos
Band-It C20699 8/3/07 Label Name
Label Grade
It Straps On, Inc. BA206 8/3/07
ITW Strapbinder ST206 8/3/07
MD Solutions 3430-SS 11/9/17 Banding
Panduit MSW75T30-CR2 11/5/12
PermaBand PMB206 5/1/17 Banding
Band and Buckle
TAPCO Inc. 497-00001 8/3/07
Xcessories Squared SSB75-30 4/13/16
Comment:
Grade 201 Stainless Steel
0.030” Thick
¾” Wide

Banding Buckle

Notes Manufacturer Catalog Number Approval Date Photos
Band-It C25699 8/3/07 Top View
Buckle w/ Strap
It Straps On, Inc. BU256 8/3/07
ITW Strapbinder ST256 8/3/07
MD Solutions BK34-SS 11/9/17 Buckle
Panduit MSBW75-C2 11/5/12
PermaBand PMB256 5/1/17 Buckle
Side View
Banding and Buckle
TAPCO, Inc. 497-00002 8/3/07
Xcessories Squared XST256 4/13/16
Comment:
Grade 201 Stainless Steel Buckle
For 0.030” Thick x ¾” Wide Banding

Parking Lot Sign Bollard

Notes Manufacturer Catalog Number Approval Date Photos
Impact Recovery Systems No Sign: SS4Y-42-SP-102 5/10/17 Adapter & Post
Elastomer
Base
Assembly
Comment:
Sign post length shall be 102" in length
Fill bollard with concrete per manufacturer's recommendation

Posts and Anchors

1 ¾” x 1 ¾” Posts

Notes Manufacturer Catalog Number Approval Date Photos
Allied Tube & Conduit
A Division of Atcore International
Telespar Square Tubular Sign Supports
16F12PXXPG
8/31/12
Comment:
12 Gauge
Pre-punched holes on all sides
Galvanized
XX = Length (even 2’ increments up to 24’)

2” x 2” Anchor

Notes Manufacturer Catalog Number Approval Date Photos
Allied Tube & Conduit
A Division of Atcore International
Telespar Square Tubular Sign Supports
4' Anchor - 20F12A04PG
11/9/12
Comment:
12 Gauge
Pre-punched holes on all sides
Galvanized
48" in length

2 ¼” x 2 ¼” Sleeves

Notes Manufacturer Catalog Number Approval Date Photos
Allied Tube & Conduit
A Division of Atcore International
Telespar Square Tubular Sign Supports
22F12A02.5PG
8/31/12
Comment:
12 Gauge
Pre-punched holes on all sides
Galvanized
30” length

Concrete Surface Mount Sign Post Anchor

Notes Manufacturer Catalog Number Approval Date Photos
Xcessories Squared Kleen Break Model 425 Sign Post Coupler
XKBSM42520-G
4/13/16 Top Half Coupling
Surface Mount Anchor
Surface Mount Iso View
Locking Wedge
Shear Bolt
Comment:
Concrete Surface Mount to be used only when installing signs on concrete medians, bridge decks, or sidewalks

Paver Median or Island Sign Post Anchor

Notes Manufacturer Catalog Number Approval Date Photos
Xcessories Squared Kleen Break Model 425 Sign Post Coupler
XKB42520-G
AXT225-36-G Anchor Extension
4/13/16 Top Half Coupling
Paver Mount Anchor
Paver Mount Iso View
Locking Wedge
Shear Bolt
Comment:
Paver Median or Island Mount to be used only when installing signs in medians or islands that have paver bricks

Up arrow 66x80.png Top Return to Approved Materials
Side arrow 80x66.png

Rectangular Rapid Flashing Beacon (RRFB)

RRFB For Use with Standard Push Button

Solar Engine

Notes Manufacturer Catalog Number Approval Date Photos
Carmanah Technologies Corp R920 Series 12/17/13 Front View
Back View
Side View
TraffiCalm Systems Controller: M75-SA300-CTLX
Collaborator: M75-SA300-CLBX
1/9/19 Solar Panel Front View
Solar Panel Back View
Comment:
Use only with standard, non-audible push buttons
Mount on standard perforated square sign posts
Color: Natural Aluminum

Mounting Bracket

Notes Manufacturer Catalog Number Approval Date Photos
Carmanah Technologies Corp 68362 - 2" square post mount
69107 - Side of Post Mount (Black)
12/17/13
TraffiCalm Systems Mounting Bracket is Included with Controller 1/9/19
Comment:
Mounting bracket varies based on type of installation
Side of post mount is not available in Natural

Light Bar

Notes Manufacturer Catalog Number Approval Date Photos
Carmanah Technologies Corp 68352 12/17/13 Front View
Back View
End View
LED's
TraffiCalm Systems M75-SA328-0000 1/9/19 Front View
Back View
End View
LED's
Comment:
Light bar with confirmation lights

Pedestrian Pushbutton

Notes Manufacturer Catalog Number Approval Date Photos
Campbell Co 4EVR 120 – X – No LED w/ Button Cup 4/5/12
Polara Engineering, Inc. Bulldog Series
Push Button Assembly – BDSP-010-X
Pole Mount Adaptor – BDPM-X
2/10/12
Comment:
Sound on actuation
NO LED Flash
X= B for Black or Y for Yellow

Sign Posts, Anchors and Sleeves

Notes Manufacturer Catalog Number Approval Date Photos
Unistrut Distribution Co./
Allied Mechanical
Tube Division
Telespar Square Tubular Sign Supports
2" x 2" Post - 20F12P14PG
2-1/4" x 2-1/4" Anchor - 22F12A04PG
2-1/2" x 2-1/2" Anchor Sleeve - 24F12APG
12/16/13
Comment:
12 Guage
Pre-punched holes on all sides
Galvanized
14' length for 2" x 2" post
48" length for 2-1/4" x 2-1/4" Anchor
18" length for 2-1/2" x 2-1/2" Anchor Sleeve
See "Aluminum Sign Blanks" and "Sign Sheeting" for approved materials for the R10-25, S1-1 and W16-7p signs

Up arrow 66x80.png Top Return to Approved Materials
Side arrow 80x66.png

RRFB For Use with Audible Push Button

Solar Engine

Notes Manufacturer Catalog Number Approval Date Photos
Carmanah Technologies Corp Model SC315 GenIII 7/13/15
Comment:
Use only with audible push buttons
Mount on standard pedestrian signal post
Color: Natural Aluminum

Mounting Bracket

Notes Manufacturer Catalog Number Approval Date Photos
Carmanah Technologies Corp 71859 - 4" to 4-1/2" Diameter Post Mount
71858 - Side of Pole Mount
7/13/15
Comment:
Mounting bracket varies based on type of installation

Light Bar

Notes Manufacturer Catalog Number Approval Date Photos
Carmanah Technologies Corp 68352 7/13/15 Front View
Back View
End View
LED's
Comment:
Light bar with confirmation lights

Pedestrian Pushbuttons ADA Audible

Notes Manufacturer Catalog Number Approval Date Photos
Polara Engineering, Inc. XAV2E-LED (Yellow)
XAV2E-LED-B (Black)

XAVCU2-DC - Included Control Unit

7/13/15
Comment:
Three yellow LED's above push button
Audible locator
Auto volume adjustment for ambient noise levels
No braille on face plate

Aluminum Pedestal Poles

Notes Manufacturer Catalog Number Approval Date Photos
Component Products, Inc Square Pedestal Base: CPI-BAS-1-P

14’ Pedestal Pole: CPI-AP-14-40
Base Collar: CPI-RBC-1

4/24/14 Base
Gades Sales Square Pedestal Base: PB-5335-1S-GL-PNC

14’ Pedestal Pole: PB5100-14-PNC
Base Collar: PB-5325-PNC

4/24/14 Side View
Bottom View
Threaded Opening
Cover
Pelco Products, Inc. Square Pedestal Base: PB-5335-1S-GL-PNC

14’ Pedestal Pole: PB-5100-14-PNC
Base Collar: PB-5325-PNC

4/23/14 Base
Base & Collar
Comment:
For Concrete Foundation, See "Anchor Bolts" for part number information. Include anchor bolts
Can substitute screw-in foundation
Pole tube is schedule 40
Include base collar with every pole
Set screws required in base collar
Include 2 7/8” OD x 7/8” ID galvanized flat washers

Up arrow 66x80.png Top Return to Approved Materials
Side arrow 80x66.png

School Zone Flashers

Radio Installations

Notes Manufacturer Catalog Number Approval Date Photos
RTC Manufacturing, Inc. Master Radio
Assembly: RTC#501676F
Master Radio Only: RTC #300650A

Remote Radio
RTC #300600
9/15/10
Comment:
Used only when access to a traffic signal cabinet is available
The master assembly installs in traffic signal cabinet and consists of: Ethernet LAN Assembly Serial Port Server, Power Supplies, Cables, 6dB Omni Antenna & 50ft Lead
The remote radio installs in the beacon cabinet
Every installation requires one Master and two Remote radios (See below)

Modem Installations

Notes Manufacturer Catalog Number Approval Date Photos
RTC Manufacturing, Inc. RTC M2MTSC 6/4/19
Comment:
Not used with Master Radio Assembly installations
Equipment consists of cable slide on bracket and antenna
Installs at beacon assembly

Surge Protector Polyphaser

Notes Manufacturer Catalog Number Approval Date Photos
RTC Manufacturing, Inc. IS-50NX-C2 9/15/10
Comment:
Only used with Master Radio Assembly installations
Installs at traffic signal cabinet

Time Switch

Notes Manufacturer Catalog Number Approval Date Photos
RTC Manufacturing, Inc. RTC AP-22 9/15/10 Front View
End View
Comment:
Required for both radio and modem installations
Installs at beacon assembly
Includes antenna and CPC Harness

Yellow Ball LED

Notes Manufacturer Catalog Number Approval Date Photos
DiaLight DuraLED 433-3230-905XL 6/4/19
GE DR6-YTFB-23B 5/5/03
Leotek TSL-12Y-LX-IL6-B1-P3-ULP 6/4/19
Comment:
10-28 volt DC power requirement

Vehicular Signal Head

Notes Manufacturer Catalog Number Approval Date Photos
Econolite Control Products, Inc. Yellow Body:
TP11VJC2P0H0 for 1 Section

Black Body:
TP11VJF2P0H0 for 1 Section
5/9/03 Front View
Back View
Open Front View
Wiring Terminals
Latch
McCain Traffic Supply Yellow Body:
M22167-P for 1 Section

Black Body:
M22168-P for 1 Section

M19271 Black Poly Visors
5/14/13 Open Front View
Wiring Terminal
Side View
Latch
Label
Mobotrex / Eagle Signal Yellow Body
SA101A1111YBB – 1 Section
5/5/03
Peek Traffic Yellow Body
PSS81S001FO for 1 Section

Black Body
PSS81E001FO for 1 Section
5/5/03

Side-of-Pole Bracket

Notes Manufacturer Catalog Number Approval Date Photos
Mobotrex / Eagle Signal Assembly w/ two brackets:
UKS-1452Y
Single Brackets:
Yellow - PDM-05443-02
Black - PDM-05443-03
5/5/03
Pelco Products, Inc. SE-0567-PNC 6/4/19

Solar Panel

Notes Manufacturer Catalog Number Approval Date Photos
American Solar Wholesale ASW-30 6/4/19
RTC Manufacturing, Inc. Solar Panel 5/5/03

Flasher Panel

Notes Manufacturer Catalog Number Approval Date Photos
RTC Manufacturing, Inc. For Radio Installations:
502598TFA

For Modem Installations:
502598SWG
5/5/03
Comment:
“L” Panel

Flasher

Notes Manufacturer Catalog Number Approval Date Photos
RTC Manufacturing, Inc. DCF2 5/5/03
Comment:
Only used with Master Radio Assembly installations
12-Volt, Solid State, w/ LED indicators
DC 2-Circuit Flasher
8-Pin Octal Base

Flasher Cabinet

Notes Manufacturer Catalog Number Approval Date Photos
RTC Manufacturing, Inc. RTC-503333HBK 6/4/19

Screw-In Foundation

Notes Manufacturer Catalog Number Approval Date Photos
JH Botts JHB660-912 1/25/15 Isometric View
Comment:
For use with flashing school beacons
Shaft Diameter – 6”
Shaft Length – 5’-0”
Plate Size – 12” square x 1” Thick
Bolt Circle Diameter – 9” to 12”

Round Pedestal Pole

Notes Manufacturer Catalog Number Approval Date Photos
Component Products, Inc Square Pedestal Base: CPI-BAS-1-P
Pole Cap: CPI-APC-1
15’ Pedestal Pole: CPI-AP-15-40
Base Collar: CPI-RBC-1
4/24/14 Base
Gades Sales Square Pedestal Base: PB-5335-1S-GL-PNC
Pole Cap: PB-5402-PNC
15’ Pedestal Pole: PB5100-15-PNC
Base Collar: PB-5325-PNC
4/24/14 Side View
Bottom View
Threaded Opening
Cover
Pelco Products, Inc. Square Pedestal Base: PB-5335-1S-GL-PNC
Pole Cap: PB-5402-PNC
15’ Pedestal Pole: PB-5100-15-PNC
Base Collar: PB-5325-PNC
4/23/14 Base
Base & Collar

Up arrow 66x80.png Top Return to Approved Materials
Side arrow 80x66.png

Sign Sheeting

Type XI Diamond Grade "Full Cube" Sheeting

Notes Manufacturer Catalog Number Approval Date Photos
Avery Dennison OmniCube Series:
White: T-11500
Yellow: T-11501
Blue: T-11505
Green: T-11507
Red: T-11508
Fluorescent Yellow: T-11511
Fluorescent Yellow-Green: T-11513
Fluorescent Orange: T11514
8/25/10
3M Diamond Grade Cube Corner (DG3 Series):
White: 4090
Yellow: 4091
Red: 4092
Blue: 4095
Green: 4097
Fluorescent Yellow: 4081
Fluorescent Yellow-Green: 4083
Fluorescent Orange: 4084
6/23/05
Comment:
ASTM Type XI
For most signs (See City of Overland Park Standard Details)
♦ Fluorescent Yellow-Green is reserved for School Zone Signing
♦ Fluorescent is reserved for special Warning Signs
♦ Yellow shall be used for all Warning Signs unless otherwise specified

Electronic Cuttable Film

Notes Manufacturer Catalog Number Approval Date Photos
Avery Dennison Yellow: OL-2001
Red: OL-2008
Orange: OL-2004
Blue: OL-2005
Green: OL-2007
Brown: OL-2009
Black: OL-2003
5/5/03
3M Yellow: EC Series 1171
Red: EC Series 1172
Orange: EC Series 1174
Blue: EC Series 1175
Green: EC Series 1177
Brown: EC Series 1179
Black: EC Series 1178
5/5/03

Flexible Sheeting for Traffic Signal Pushbutton Posts

Notes Manufacturer Catalog Number Approval Date Photos
3M Flexible Work Zone Sheeting:
White: 3910
Fluorescent Yellow: 3911
1/14/2020
Comment:
Fluorescent Yellow shall only be used on traffic signal pushbutton posts located in medians.

Up arrow 66x80.png Top Return to Approved Materials
Side arrow 80x66.png

Tubular Delineators

Flush Mounted Tubular Delineator

Notes Manufacturer Catalog Number Approval Date Photos
Pexco / Davidson Traffic
Control Products
DP236 36" white post w/ 2 - 3" white FHIP wraps:
#833DP236WHT001

DP236 36" yellow post w/ 2 - 3" yellow FHIP wraps:
#833DP236YEL001
12/10/13 Side View
Top
Comment:
DP200 Series
NCHRP 350 Compliant
360 degree retro-reflectivity
Adhesive Base Only

Ground Mounted Tubular Delineator

Notes Manufacturer Catalog Number Approval Date Photos
Pexco / Davidson Traffic
Control Products
36" white UR post w/ 1 - 3" x 9" FHIP white wrap:
#833GM336WHTUR100
36" yellow UR post w/ 1 - 3" x 9" FHIP yellow wrap:
#833GM336YELUR102
2" x 12" 12 ga. anchor - #8GMANCHOR12
Quick Release Pin (one per post) - #800HDWE101
12/10/13 Side View
Bottom View
Top View
Label
Comment:
FG-300 Ground Mount
NCHRP 350 Compliant

Up arrow 66x80.png Top Return to Approved Materials
Side arrow 80x66.png